34 lines
1.3 KiB
Markdown
34 lines
1.3 KiB
Markdown
# Introduction
|
|
|
|
This is a bunch of project that aims to provide a reusable platform for different kind of project using ESP8266.
|
|
|
|
Start by looking at ESP8266 SDK integration in Arduino environment https://github.com/esp8266/Arduino
|
|
|
|
## WiFiWebServer
|
|
Provide GPIO control by HTTP request
|
|
|
|
## WiFiAccessPointConfigurator
|
|
Provide GPIO control by HTTP request.
|
|
|
|
To be able to configure the Wifi credentials without flashing the device, at first boot, the device will create a AP that will help to configure:
|
|
* Wifi SSID to connect to
|
|
* Wifi Passwd to use for SSID
|
|
* A Mdns name to be accessible without IP address (e.g. under Linux : mydevice.local )
|
|
|
|
Settings can be reconfigured latter by web interface or by pulling down gpio 3
|
|
|
|
Device can also be put in OTA mode and will wait for OTA from the espota tool.
|
|
|
|
## WifiControlSensor
|
|
Provide previous WiFiAccessPointConfigurator features and can also get measure from several sensors:
|
|
* BMP180
|
|
* DHT11/22
|
|
* Any Analog sensor
|
|
|
|
Those measure can be shared by MQTT(s). MQTT details (server, username, passwd, port) can be configured by a web page.
|
|
|
|
To interface with BMP180, the following library should be installed into Arduino environment: https://github.com/mmaret/BMP180_Breakout_Arduino_Library/archive/master.zip
|
|
|
|
To use mqtt, the Adafruit Mqtt library should be installed.
|
|
This have been tested against a mosquitto server
|