Fix teleinfo configuration

This commit is contained in:
Mathieu Maret 2022-09-10 21:53:06 +02:00
parent 8f471fc0bf
commit 1b52a80b15
5 changed files with 58 additions and 34 deletions

View File

@ -4,18 +4,18 @@
#ifdef CONFIG_ENABLE_TELEINFO #ifdef CONFIG_ENABLE_TELEINFO
#include <LibTeleinfo.h> #include <LibTeleinfo.h>
int TeleinfoSetup(); int TeleinfoSetup();
//int TeleinfoProcess();
int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo); int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo);
int TeleinfoProcess(float &iinst, float &papp, float &base);
#else #else
typedef struct _ValueList {
} ValueList;
int TeleinfoSetup() { int TeleinfoSetup() {
SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time"); SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time");
return -1; return -1;
}; };
//int TeleinfoProcess(){ inline int TeleinfoProcess(std::vector<struct mqttInfo> &){
int TeleinfoProcess(std::vector<struct mqttInfo> &){ return 0;
};
int TeleinfoProcess(float &iinst, float &papp, float &base){
return 0; return 0;
}; };
#endif #endif

View File

@ -1,19 +1,14 @@
#ifdef CONFIG_ENABLE_TELEINFO #ifdef CONFIG_ENABLE_TELEINFO
#include "Teleinfo.h" #include "Teleinfo.h"
#include <LibTeleinfo.h> #include <LibTeleinfo.h>
#define TELESerial Serial
TInfo tinfo; TInfo tinfo;
void onNewFrame(ValueList *me)
{
SKETCH_DEBUG_PRINTLN("New Frame available");
}
int TeleinfoSetup() int TeleinfoSetup()
{ {
Serial.begin(1200, SERIAL_7E1); TELESerial.begin(1200, SERIAL_7E1);
tinfo.init(); tinfo.init();
tinfo.attachNewFrame(onNewFrame);
return 0; return 0;
} }
@ -22,11 +17,10 @@ int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
{ {
int c; int c;
while ((c = Serial.read()) >= 0) { while ((c = TELESerial.read()) >= 0) {
tinfo.process(c); tinfo.process(c);
} }
ValueList *me = tinfo.getList(); ValueList *me = tinfo.getList();
//std::vector<struct mqttInfo> batchInfo;
if (me) if (me)
me = me->next; me = me->next;
while (me) { while (me) {
@ -44,8 +38,32 @@ int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
} }
me = me->next; me = me->next;
} }
//if (mode == BOOTMODE_NORMAL)
// MqttBatchPublish(batchInfo, conf.mqttUser, conf.host); return 0;
}
int TeleinfoProcess(float &iinst, float &papp, float &base )
{
int c;
while ((c = TELESerial.read()) >= 0) {
tinfo.process(c);
}
ValueList *me = tinfo.getList();
if (me)
me = me->next;
while (me) {
if (strcmp(me->name, "IINST") == 0) {
iinst = atof(me->value);
}
if (strcmp(me->name, "PAPP") == 0) {
papp = atof(me->value);
}
if (strcmp(me->name, "BASE") == 0) {
base = atof(me->value);
}
me = me->next;
}
return 0; return 0;
} }

View File

@ -219,7 +219,8 @@ void OTASetup() {
#endif #endif
} }
void setup() { void setup()
{
#ifdef CONFIG_SETUP_BUTTON #ifdef CONFIG_SETUP_BUTTON
new HIB(CONFIG_SETUP_BUTTON, HIGH, NULL, NULL, onLongButtonPressed); new HIB(CONFIG_SETUP_BUTTON, HIGH, NULL, NULL, onLongButtonPressed);
#endif #endif
@ -230,16 +231,16 @@ void setup() {
SKETCH_DEBUG_PRINTLN(); SKETCH_DEBUG_PRINTLN();
// Get GPIO 3 Status // Get GPIO 3 Status
//#if CONFIG_SERIAL_SHOULD_SWAP #if CONFIG_SERIAL_SHOULD_SWAP
// SKETCH_DEBUG_PRINTLN("SWAP UART"); SKETCH_DEBUG_PRINTLN("SWAP UART");
// Serial.swap(); //Switch Serial on GPIO 13 & 15 Serial.swap(); // Switch Serial on GPIO 13 & 15
//#endif #endif
pinMode(CONFIG_SETUP_GPIO, INPUT_PULLUP); pinMode(CONFIG_SETUP_GPIO, INPUT_PULLUP);
int txStatus = digitalRead(CONFIG_SETUP_GPIO); int txStatus = digitalRead(CONFIG_SETUP_GPIO);
//#if !defined(CONFIG_ENABLE_EXTRA_GPIO) && CONFIG_SERIAL_SHOULD_SWAP #if !defined(CONFIG_ENABLE_EXTRA_GPIO) && CONFIG_SERIAL_SHOULD_SWAP
// Serial.swap(); // Switch back on GPIO 1 & 3 Serial.swap(); // Switch back on GPIO 1 & 3
// SKETCH_DEBUG_PRINTLN("SWAP UART"); SKETCH_DEBUG_PRINTLN("SWAP UART");
//#endif #endif
EEPROM.begin(CONFIG_EEPROM_SIZE); EEPROM.begin(CONFIG_EEPROM_SIZE);
EepromReadConfig(conf); EepromReadConfig(conf);
@ -368,6 +369,5 @@ void loop() {
MqttBatchPublish(batchInfo, conf.mqttUser, conf.host); MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
nbCycle = 0; nbCycle = 0;
} }
} }
} }

View File

@ -39,11 +39,6 @@
#define CONFIG_DHT_PIN 0 #define CONFIG_DHT_PIN 0
#endif #endif
#if defined(CONFIG_ENABLE_TELEINFO)
#warning "TELEINFO is using SERIAL for communication. Debug will be on Serial1 (D4)"
#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial1
#endif
#ifndef CONFIG_DRY_POWER_PIN #ifndef CONFIG_DRY_POWER_PIN
#define CONFIG_DRY_POWER_PIN -1 #define CONFIG_DRY_POWER_PIN -1
#endif #endif
@ -69,7 +64,7 @@
#endif #endif
#ifndef CONFIG_SETUP_GPIO #ifndef CONFIG_SETUP_GPIO
#define CONFIG_SETUP_GPIO 3 #define CONFIG_SETUP_GPIO 14
#endif #endif
#ifndef CONFIG_DHT_TYPE #ifndef CONFIG_DHT_TYPE
@ -79,3 +74,14 @@
#if CONFIG_SETUP_GPIO == 3 || CONFIG_SETUP_GPIO == 1 #if CONFIG_SETUP_GPIO == 3 || CONFIG_SETUP_GPIO == 1
#define CONFIG_SERIAL_SHOULD_SWAP #define CONFIG_SERIAL_SHOULD_SWAP
#endif #endif
#if defined(CONFIG_ENABLE_TELEINFO)
#warning "TELEINFO is using SERIAL for communication. Debug will be on Serial1 (D4)"
#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial1
#if defined(CONFIG_SERIAL_SHOULD_SWAP)
#error "When enabling TELEINFO, SERIAL_SHOULD_SWAP cannot be enabled (SETUP_GPIO == 1 or 3)"
#endif
#if defined(CONFIG_ENABLE_EXTRA_GPIO)
#error "When enabling TELEINFO, ENABLE_EXTRA_CPIO cannot be enabled"
#endif
#endif

View File

@ -15,7 +15,7 @@
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins // Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
// It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL // It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
// Should be powered by 3.3v and sampled every 3sec or 300s (Or you should adapt bsec_config_iaq in BME680_BSEC.ino ) // Should be powered by 3.3v and sampled every 3sec or 300s (Or you should adapt bsec_config_iaq in BME680_BSEC.ino )
#define CONFIG_BME680_BSEC_ENABLE //#define CONFIG_BME680_BSEC_ENABLE
#define CONFIG_BME680_BSEC_I2C_ADDR 0x77 #define CONFIG_BME680_BSEC_I2C_ADDR 0x77
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins // Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins