Add IRQ handler

idt.c

@@ -42,3 +42,23 @@ int idtSetup()
   return 0;
 }
 
+int idt_set_handler(int index, unsigned int addr, int priviledge)
+{
+    struct idtEntry *idte;
+
+    if (index < 0 || index >= IDT_NUM)
+        return -1;
+    if ((priviledge < 0) || priviledge > 3)
+        return -1;
+
+    idte = &idt[index];
+
+    if (addr != (unsigned int)NULL) {
+        idte->offset_low  = addr && 0xffff;
+        idte->offset_high = (addr >> 16) && 0xffff;
+        idte->dpl         = priviledge;
+        idte->present     = 1;
+    }
+
+    return 0;
+}

idt.h

@@ -42,3 +42,4 @@ struct idtRegister {
 	 ((index) << 3))
 
 int idtSetup();
+int idt_set_handler(int index, unsigned int addr, int priviledge);

irq.c

@@ -1,8 +1,32 @@
 #include "irq.h"
+#include "idt.h"
 #include "pic.h"
+#include "types.h"
 
 int irqSetup()
 {
 	initPic();
 	return 0;
 }
+
+irq_handler irq_handler_array[IRQ_NUM] = {NULL, };
+
+int irqSetRoutine(int irq, irq_handler handler)
+{
+    uint32_t flags;
+    if ((irq < 0) || irq >= IRQ_NUM)
+        return -1;
+
+    disable_IRQs(flags);
+
+    irq_handler_array[irq] = handler;
+
+    if (handler != NULL) {
+        int ret =
+            idt_set_handler(IRQ_BASE_ADDRESS + irq, (unsigned int)irq_handler_array[irq], 0);
+        if (!ret)
+            enableIrq(irq);
+    }
+    restore_IRQs(flags);
+    return 0;
+}

irq.h

@@ -1,5 +1,16 @@
 #pragma once
 
+#define save_flags(flags) asm volatile("pushfl ; popl %0" : "=g"(flags)::"memory")
+#define restore_flags(flags) asm volatile("push %0; popfl" ::"g"(flags) : "memory")
+
+#define disable_IRQs(flags)                                                                   \
+    ({                                                                                        \
+        save_flags(flags);                                                                    \
+        asm("cli\n");                                                                         \
+    })
+#define restore_IRQs(flags) restore_flags(flags)
+
+
 #define IRQ_TIMER         0 // MASTER IRQ
 #define IRQ_KEYBOARD      1 
 #define IRQ_SLAVE_PIC     2 
@@ -17,5 +28,12 @@
 #define IRQ_HARDDISK      14
 #define IRQ_RESERVED_5    15
 
-typedef void (*irq_handler)(int irq);
+#define IRQ_BASE_ADDRESS 0x20
+#define IRQ_NUM 16
+
+// An handler should finish by the iret opcode -> https://wiki.osdev.org/Interrupt_Service_Routines
+// That's why we use wrapper around them or the gcc interrupt attribut
+// __attribute__((interrupt)) void (*irq_handler)(int irq);
+typedef void (*irq_handler)(int *irq);
 int irqSetup();
+int irqSetRoutine(int irq, irq_handler handler);

main.c

@@ -21,6 +21,16 @@ void cpuid(int code, uint32_t *a, uint32_t *d)
     asm volatile("cpuid" : "=a"(*a), "=d"(*d) : "0"(code) : "ebx", "ecx");
 }
 
+void keyboard_handler(int *id)
+{
+    __asm__("pushal");
+    (void)id;
+    const char *tictac = "tic tac";
+    const short color  = RED;
+    printString(tictac, color, BLACK, 0, 3);
+    __asm__("popal; leave; iret");
+}
+
 void kmain()
 {
     const short color = GREEN;
@@ -30,6 +40,9 @@ void kmain()
     printString("Setting up IRQ", color, BLACK, 0, 1);
     irqSetup();
 
+    irqSetRoutine(IRQ_KEYBOARD, keyboard_handler);
+    // Enabling the HW interrupts
+    //asm volatile("sti\n");
     while (1) {
         char c = getScancode();
         printChar(c, color, BLACK, 0, 5);

mbr.asm

@@ -83,6 +83,7 @@ main:
     mov ax, 0x3
     int 0x10
 
+    ; http://www.ctyme.com/intr/rb-0607.htm
     ; Bios read first 512 bytes, read next disk sector
     mov ah, 0x2    ;read sectors
     mov al, 6      ;sectors to read

pic.c

@@ -1,5 +1,6 @@
 #include "pic.h"
 #include "io.h"
+#include "irq.h"
 
 #define ICW1_ICW4 0x01      /* ICW4 (not) needed */
 #define ICW1_SINGLE 0x02    /* Single (cascade) mode */
@@ -15,15 +16,15 @@
 
 void initPic(void)
 {
-	/* Send CMD: Init + senquence in 4 DATA */
+	/* Send CMD: Init + sequence in 4 DATA */
 	outb(ICW1_INIT + ICW1_ICW4, PIC_MASTER_CMD);
 	outb(ICW1_INIT + ICW1_ICW4, PIC_SLAVE_CMD);
 
 	/* Send ICW2: ctrl base address. Remap IRQ from interupt range 0x0-0xF to 0x20-0x2F as
 	 * intel
 	 * reserve interupt 0x0-0x1F in protected mode (e.g. 0-7 are CPU exception)  */
-	outb(0x20, PIC_MASTER_DATA);
+	outb(IRQ_BASE_ADDRESS, PIC_MASTER_DATA);
-	outb(0x28, PIC_SLAVE_DATA);
+	outb(IRQ_BASE_ADDRESS + 8, PIC_SLAVE_DATA);
 
 	/* Send ICW3 master: mask where slaves are connected */
 	outb(0x4, PIC_MASTER_DATA);

types.h

@@ -34,3 +34,5 @@ typedef		__u32		uint32_t;
 typedef		__u64		uint64_t;
 typedef		__u64		u_int64_t;
 typedef		__s64		int64_t;
+
+#define NULL ((void*)0)