You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Mathieu b370a109f6 Use Adafruit_MQTT fork that support retains 5 years ago
Esp8266-Arduino-Makefile@6ffd79de30 Fix MQTT publishing when mqtt is not configured 5 years ago
WiFiAccessPointConfigurator Do not need to be setup to play with gpio or OTA 6 years ago
WiFiWebServer Complete documentation 6 years ago
WifiControlSensor Fix reconfiguration when wifi unreachable 5 years ago
.gitlab-ci.yml Use Adafruit_MQTT fork that support retains 5 years ago
.gitmodules Add Esp8266-Arduino-Makefile as a submodule 6 years ago
LICENSE Add license 6 years ago Update 5 years ago OTA does not need a reboot anymore 5 years ago


This is a bunch of project that aims to provide a reusable platform for different kind of project using ESP8266.

Start by looking at ESP8266 SDK integration in Arduino environment


Provide GPIO control by HTTP request


Provide GPIO control by HTTP request.

To be able to configure the Wifi credentials without flashing the device, at first boot, the device will create a AP that will help to configure:

  • Wifi SSID to connect to
  • Wifi Passwd to use for SSID
  • A Mdns name to be accessible without IP address (e.g. under Linux : mydevice.local )

Settings can be reconfigured latter by web interface or by pulling down gpio 3

Device can also be put in OTA mode and will wait for OTA from the espota tool.


Provide previous WiFiAccessPointConfigurator features and can also get measure from several sensors:

  • BMP180
  • DHT11/22
  • Any Analog sensor

Those measure can be shared by MQTT(s). MQTT details (server, username, passwd, port) can be configured by a web page.

To interface with BMP180, the following library should be installed into Arduino environment:

To use mqtt, the Adafruit Mqtt library should be installed. This have been tested against a mosquitto server