Domotique/WiFiWebServer/WiFiWebServer.ino
2015-10-01 01:07:11 +02:00

201 lines
4.5 KiB
C++

/*
* This sketch demonstrates how to set up a simple HTTP-like server.
* The server will set a GPIO pin depending on the request
* http://server_ip/gpioX/0 will set the GPIOX low,
* http://server_ip/gpioX/1 will set the GPIOX high,
* http://server_ip/gpioX will return GPIOX value,
* http://server_ip/mode/gpioX/Y will set the GPIOX mode to Y (with Y in 0=INPUT, 1=OUTPUT, 2=INPUT_PULLUP),
* server_ip is the IP address of the ESP8266 module, will be
* printed to Serial when the module is connected.
*/
#include <ESP8266WiFi.h>
#define URL_GPIO "/gpio"
#define URL_MODE "/mode"
const char* ssid = "freebox_sarah";
const char* password = "password";
// Create an instance of the server
// specify the port to listen on as an argument
WiFiServer server(80);
enum requestType {INVALID, GET_VALUE, SET_VALUE, SET_MODE};
int mode[] = {INPUT, OUTPUT, INPUT_PULLUP};
struct request {
int gpio;
int value;
requestType type;
};
int parseRequest(String &raw, struct request &req ) {
int index, end;
String url;
index = raw.indexOf(URL_MODE);
if ( index != -1) {
String subUrl = raw.substring(index + strlen(URL_MODE));
if (parseRequest(subUrl, req) >= 0) {
if ( req.value >= 0 && req.value <= 2) {
req.type = SET_MODE;
req.value = mode[req.value];
return 0;
} else
goto invalid;
} else
goto invalid;
}
index = raw.indexOf(URL_GPIO);
if (index == -1)
goto invalid;
end = raw.indexOf(" ", index);
if (end == -1)
goto invalid;
url = raw.substring(index, end);
end = url.indexOf("/", 1);
//URL is /gpioN something
if (end == -1) {
req.type = GET_VALUE;
req.gpio = url.substring(strlen(URL_GPIO)).toInt();
} else {
req.type = SET_VALUE;
req.gpio = url.substring(strlen(URL_GPIO), end).toInt();
req.value = url.substring(end + 1).toInt();
}
return 0;
invalid:
req.type = INVALID;
return -1;
}
void setup() {
uint8_t mac[WL_MAC_ADDR_LENGTH];
Serial.begin(115200);
delay(10);
// prepare GPIO2
pinMode(2, OUTPUT);
digitalWrite(2, 0);
if (WiFi.macAddress(mac) != 0) {
for (int i = 0; i < WL_MAC_ADDR_LENGTH; i++) {
Serial.print(mac[i], HEX);
Serial.print((i < WL_MAC_ADDR_LENGTH - 1) ? ":" : "\n");
}
}
// Connect to WiFi network
Serial.println();
Serial.println();
Serial.print("Connecting to ");
Serial.println(ssid);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println("");
Serial.println("WiFi connected");
// Start the server
server.begin();
Serial.println("Server started");
// Print the IP address
Serial.println(WiFi.localIP());
}
void loop() {
// Check if a client has connected
WiFiClient client = server.available();
if (!client) {
return;
}
// Wait until the client sends some data
Serial.println("new client");
while (!client.available()) {
delay(1);
}
// Read the first line of the request
String req = client.readStringUntil('\r');
Serial.println(req);
client.flush();
struct request request;
if (parseRequest(req, request) == -1 || request.type == INVALID ) {
Serial.println("invalid request");
client.stop();
return;
}
client.flush();
String s = "HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n<!DOCTYPE HTML>\r\n<html>\r\n";
if (request.type == SET_VALUE) {
// Set GPIO according to the request
Serial.print("Setting gpio ");
Serial.print(request.gpio);
Serial.print(" to ");
Serial.println(request.value);
//make sure this GPIO is set as output
pinMode(request.gpio, OUTPUT);
digitalWrite(request.gpio, request.value);
// Prepare the response
s += "GPIO";
s += request.gpio;
s += " is now ";
s += (request.value) ? "high" : "low";
} else if (request.type == GET_VALUE) {
Serial.print("Getting value of GPIO");
Serial.println(request.gpio);
s += "GPIO";
s += request.gpio;
s += " is ";
s += digitalRead(request.gpio);
} else if (request.type == SET_MODE) {
Serial.print("Setting mode of GPIO");
Serial.print(request.gpio);
Serial.print(" to mode ");
Serial.print(request.value);
pinMode(request.gpio, request.value);
s += "GPIO";
s += request.gpio;
s += " mode is now ";
s += (request.value);
}
s += "</html>\n";
client.print(s);
// Send the response to the client
delay(1);
Serial.println("Client disonnected");
// The client will actually be disconnected
// when the function returns and 'client' object is detroyed
}