WifiControlSensor/MQTT.h

@@ -21,6 +21,9 @@
 #define TELEINFO_IINST_FEED_FORMAT     "/feeds/%s/%s/teleinfo/iinst"
 #define TELEINFO_PAPP_FEED_FORMAT     "/feeds/%s/%s/teleinfo/papp"
 #define TELEINFO_BASE_FEED_FORMAT     "/feeds/%s/%s/teleinfo/base"
+#define SCD4X_TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/scd4x/temperature"
+#define SCD4X_HUMIDITY_FEED_FORMAT    "/feeds/%s/%s/scd4x/humidity"
+#define SCD4X_CO2_FEED_FORMAT         "/feeds/%s/%s/scd4x/co2"
 #ifndef CONFIG_DISABLE_MQTT
 #include "Adafruit_MQTT.h"
 

WifiControlSensor/SCD4X.ino

@@ -48,7 +48,7 @@ int SCD4XGetMeasure(float &temperature, float &humidity, uint16_t &co2)
         char errorMsg[256];
         SKETCH_DEBUG_PRINT("Error with reading measurement. Error : ");
         errorToString(error, errorMsg, sizeof(errorMsg));
-        SKETCH_DEBUG_PRINTLN(" Co2: %d", co2);
+        SKETCH_DEBUG_PRINTF(" Co2: %d\n", co2);
 
         return -1;
     }

WifiControlSensor/WifiControlSensor.ino

@@ -53,6 +53,7 @@
 #include "Adafruit_MQTT_Client.h"
 #include "EEPROM.h"
 #include "Teleinfo.h"
+#include "SCD4X.h"
 
 extern "C" {
 #include <user_interface.h>
@@ -68,6 +69,8 @@ float dhtTemp, dhtHumidity;
 float bme680T, bme680P, bme680H, bme680G, bme680A;
 float bme680BSECT, bme680BSECP, bme680BSECH, bme680BSECIaq, bme680BSECIaqAcc;
 float teleIinst, telePapp, teleBase;
+float SCD4xT, SCD4xH;
+uint16_t SCD4xCo2;
 int dryness;
 uint8_t mode;
 int reconfig = 0;
@@ -296,6 +299,9 @@ void setup()
     if(!TeleinfoSetup()){
       SKETCH_DEBUG_PRINTLN("Teleinfo init success");
     }
+    if(!SCD4XSetup()){
+      SKETCH_DEBUG_PRINTLN("SCD4X init success");
+    }
     WebSetupServer(mode);
   }
   samplingPeriod = conf.samplingPeriod;
@@ -334,6 +340,12 @@ void loop() {
         batchInfo.push_back({dhtTemp, TEMPERATURE_DHT_FEED_FORMAT, 0, 0});
         batchInfo.push_back({dhtHumidity, HUMIDITY_DHT_FEED_FORMAT, 0, 0});
       }
+      if (!SCD4XGetMeasure(SCD4xT, SCD4xH, SCD4xCo2)) {
+        SKETCH_DEBUG_PRINTF("Current %f°C %f Humidity, Current C02 %d\n", SCD4xT, SCD4xH, SCD4xCo2);
+        batchInfo.push_back({SCD4xT, SCD4X_TEMPERATURE_FEED_FORMAT, 0, 0});
+        batchInfo.push_back({SCD4xH, SCD4X_HUMIDITY_FEED_FORMAT, 0, 0});
+        batchInfo.push_back({(float)SCD4xCo2, SCD4X_CO2_FEED_FORMAT, 0, 0});
+      }
       if (!DryGetMeasure(dryness)) {
         SKETCH_DEBUG_PRINTF("Current dryness %d %%\n", (dryness * 100) / 1024);
         batchInfo.push_back({(float)dryness, DRY_FEED_FORMAT, 0, 0});

WifiControlSensor/config_device.h

@@ -35,7 +35,7 @@
 //#define CONFIG_ENABLE_DRY_SENSOR
 //If the dry sensor is powered by a GPIO, this GPIO could be defined here
 //#define CONFIG_DRY_POWER_PIN 13
-
+#define CONFIG_ENABLE_SCD4X
 // Enable light sleep to save some power (http://bbs.espressif.com/viewtopic.php?f=6&t=133&p=485&hilit=sleep+modem#p485)
 #define CONFIG_ENABLE_POWER_SAVE