mathieu/Domotique
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Compare commits

base: mathieu:master
Branches Tags
mathieu:master
mathieu:teleinfo
mathieu:bme680_bsec
mathieu:bme680
mathieu:bureau_conf
mathieu:bssid_channel
mathieu:Jardin_conf
mathieu:lefevre_2
mathieu:lefevre
mathieu:sonoff
mathieu:gpiosensors
mathieu:prod_1
..
compare: mathieu:teleinfo
Branches Tags
mathieu:master
mathieu:teleinfo
mathieu:bme680_bsec
mathieu:bme680
mathieu:bureau_conf
mathieu:bssid_channel
mathieu:Jardin_conf
mathieu:lefevre_2
mathieu:lefevre
mathieu:sonoff
mathieu:gpiosensors
mathieu:prod_1

No commits in common. "master" and "teleinfo" have entirely different histories.
master ... teleinfo

16 changed files with 56 additions and 267 deletions
Show Stats Expand all files Collapse all files

2
WifiControlSensor/BME680.h
View File

@ -14,6 +14,8 @@
//Use Default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
#define SEALEVELPRESSURE_HPA (1013.25)
#include <SFE_BMP180.h>
#include "debug_sketch.h"
int BME680GetMeasure(float &t, float &p, float &h, float &g, float &a);
int BME680Setup();

8
WifiControlSensor/BME680_BSEC.ino
View File

@ -16,12 +16,12 @@
generic_33v_300s_28d
*/
const uint8_t bsec_config_iaq[] = {
#if CONFIG_SAMPLING_PERIOD_MS == 3000
#if CONFIG_SAMPLING_PERIODE_MS == 3000
#include "config/generic_33v_3s_4d/bsec_iaq.txt"
#elif CONFIG_SAMPLING_PERIOD_MS == 300000
#elif CONFIG_SAMPLING_PERIODE_MS == 300000
#include "config/generic_33v_300s_4d/bsec_iaq.txt"
#else
#error "Unsupport CONFIG_SAMPLING_PERIOD_MS (3000 and 300000 are supported)"
#error "Unsupport CONFIG_SAMPLING_PERIODE_MS (3000 and 300000 are supported)"
#endif
};
@ -94,7 +94,7 @@ int BME680BSECGetMeasure(float &t, float &p, float &h, float &iaq, float &iaqAcc
{
if (iaqSensor.run()) { // If new data is available
t = iaqSensor.temperature;
p = iaqSensor.pressure/100;
p = iaqSensor.pressure;
h = iaqSensor.humidity;
iaq = iaqSensor.iaq;
iaqAcc = iaqSensor.iaqAccuracy;

15
WifiControlSensor/BMP280.h
View File

@ -1,15 +0,0 @@
#pragma once
#ifdef CONFIG_ENABLE_BMP280
#include "debug_sketch.h"
int BMP280GetTemperature(double &t);
int BMP280GetTempAndPressure(double &t, double &p);
int BMP280Setup();
bool BMP280IsConnected();
#else //CONFIG_ENABLE_BMP80
int BMP280GetTemperature(double &){return -1;};
int BMP280GetTempAndPressure(double &, double &){return -1;};
int BMP280Setup(){SKETCH_DEBUG_PRINTLN("BMP280 is disabled at build time"); return -1;};
bool BMP280IsConnected(){return false;};
#endif

44
WifiControlSensor/BMP280.ino
View File

@ -1,44 +0,0 @@
#ifdef CONFIG_ENABLE_BMP280
#include "BMP280.h"
#include <Adafruit_BMP280.h>
Adafruit_BMP280 bmp;
int bmpConnected = 0;
int BMP280Setup()
{
bmpConnected = bmp.begin(BMP280_ADDRESS_ALT);
if (!bmpConnected) {
SKETCH_DEBUG_PRINTLN("Cannot connect to BMP280");
return -1;
}
/* Default settings from datasheet. */
bmp.setSampling(Adafruit_BMP280::MODE_NORMAL, /* Operating Mode. */
Adafruit_BMP280::SAMPLING_X2, /* Temp. oversampling */
Adafruit_BMP280::SAMPLING_X16, /* Pressure oversampling */
Adafruit_BMP280::FILTER_X16, /* Filtering. */
Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
return 0;
}
bool BMP280IsConnected()
{
return bmpConnected != 0;
}
int BMP280GetTemperature(double &t)
{
if (!BMP280IsConnected())
return -1;
t = bmp.readTemperature();
return 0;
}
int BMP280GetTempAndPressure(double &t, double &p)
{
if (!BMP280IsConnected())
return -1;
t = bmp.readTemperature();
p = bmp.readPressure()/100;
return 0;
}
#endif

1
WifiControlSensor/EEPROM.h
View File

@ -17,7 +17,6 @@ typedef struct productConfig_t {
uint32_t dns2;
uint8_t channel;
char *bssid;
uint32_t samplingPeriod;
} productConfig;

4
WifiControlSensor/EEPROM.ino
View File

@ -24,7 +24,7 @@ int EepromSaveConfig(productConfig &config) {
+ String(config.ip_mode) + ";"
+ config.ip + ";" + config.gw + ";" + config.mask + ";"
+ config.dns + ";" + config.dns2 + ";" + config.channel + ";"
+ config.bssid + ";" + config.samplingPeriod + ";";
+ config.bssid + ";";
if (eeprom.length() > CONFIG_EEPROM_SIZE )
return -EMSGSIZE;
@ -104,8 +104,6 @@ void EepromReadConfig(productConfig &config) {
readConfElement(&tmpString, i);
config.channel = atoi(tmpString);
readConfElement(&config.bssid, i);
readConfElement(&tmpString, i);
config.samplingPeriod = atoi(tmpString);
}

3
WifiControlSensor/MQTT.h
View File

@ -21,9 +21,6 @@
#define TELEINFO_IINST_FEED_FORMAT "/feeds/%s/%s/teleinfo/iinst"
#define TELEINFO_PAPP_FEED_FORMAT "/feeds/%s/%s/teleinfo/papp"
#define TELEINFO_BASE_FEED_FORMAT "/feeds/%s/%s/teleinfo/base"
#define SCD4X_TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/scd4x/temperature"
#define SCD4X_HUMIDITY_FEED_FORMAT "/feeds/%s/%s/scd4x/humidity"
#define SCD4X_CO2_FEED_FORMAT "/feeds/%s/%s/scd4x/co2"
#ifndef CONFIG_DISABLE_MQTT
#include "Adafruit_MQTT.h"

9
WifiControlSensor/MQTT.ino
View File

@ -197,17 +197,14 @@ void MqttCheckIRQ() {
}
void MqttCheckSubscription()
{
if (mqtt->getSubscriptionCount() == 0)
return;
void MqttCheckSubscription() {
if (MqttConnect() == 0) {
Adafruit_MQTT_Subscribe *subscription;
while ((subscription = mqtt->readSubscription(0))) {
int gpio = getGpioFromSubscription(subscription, "/gpio/");
if (gpio > 0 && findIndex(gpio, gpioControlled) >= 0) {
SKETCH_DEBUG_PRINTF("Got Subscription for GPIO %d\n", gpio);
char *value = (char *)subscription->lastread;
char *value = (char *) subscription->lastread;
SKETCH_DEBUG_PRINTF("Receive data: %s\n", value);
MqttChangeGpioValue(gpio, atoi(value));
}
@ -215,7 +212,7 @@ void MqttCheckSubscription()
gpio = getGpioFromSubscription(subscription, "/pwm/");
if (gpio > 0 && findIndex(gpio, pwmControlled) >= 0) {
SKETCH_DEBUG_PRINTF("Got Subscription for PWM %d\n", gpio);
char *value = (char *)subscription->lastread;
char *value = (char *) subscription->lastread;
SKETCH_DEBUG_PRINTF("Receive data: %s\n", value);
MqttChangePWMValue(gpio, atoi(value));
}

23
WifiControlSensor/SCD4X.h
View File

@ -1,23 +0,0 @@
#pragma once
#ifdef CONFIG_ENABLE_SCD4X
#include "debug_sketch.h"
int SCD4XGetMeasure(float &t, float &h, uint16_t &co2);
int SCD4XSetup();
bool SCD4XIsConnected();
#else
int SCD4XGetMeasure(float &, float &, uint16_t &)
{
return -1;
};
int SCD4XSetup()
{
SKETCH_DEBUG_PRINTLN("SCD4X is disabled at build time");
return -1;
};
bool SCD4XIsConnected()
{
return false;
};
#endif

61
WifiControlSensor/SCD4X.ino
View File

@ -1,61 +0,0 @@
#ifdef CONFIG_ENABLE_SCD4X
#include "SCD4X.h"
#include <Arduino.h>
#include <SensirionI2CScd4x.h>
#include <Wire.h>
SensirionI2CScd4x scd4x;
int SCD4XConnected = 0;
int SCD4XSetup()
{
Wire.begin();
scd4x.begin(Wire);
// Stop previous measurement
uint16_t error = scd4x.stopPeriodicMeasurement();
if (error) {
SKETCH_DEBUG_PRINTLN("Cannot connect to SCD4X");
return -1;
}
// Start new measurement
error = scd4x.startPeriodicMeasurement();
if (error) {
SKETCH_DEBUG_PRINTLN("Cannot start measurement for SCD4X");
return -1;
}
SCD4XConnected = 1;
return 0;
}
int SCD4XGetMeasure(float &temperature, float &humidity, uint16_t &co2)
{
// Read Measurement
bool isDataReady = false;
uint16_t error = scd4x.getDataReadyFlag(isDataReady);
if (error) {
SKETCH_DEBUG_PRINTLN("Error trying to execute getDataReadyFlag() for SCD4X ");
return -1;
}
if (!isDataReady) {
return -1;
}
error = scd4x.readMeasurement(co2, temperature, humidity);
if (error || co2 == 0) {
char errorMsg[256];
SKETCH_DEBUG_PRINT("Error with reading measurement. Error : ");
errorToString(error, errorMsg, sizeof(errorMsg));
SKETCH_DEBUG_PRINTF(" Co2: %d\n", co2);
return -1;
}
return 0;
}
bool SCD4XIsConnected()
{
return SCD4XConnected != 0;
}
#endif

14
WifiControlSensor/Teleinfo.h
View File

@ -4,20 +4,18 @@
#ifdef CONFIG_ENABLE_TELEINFO
#include <LibTeleinfo.h>
int TeleinfoSetup();
int TeleinfoRetrieve(float &iinst, float &papp, float &base);
int TeleinfoRetrieve(float &iinst, float &papp, float &base,
std::vector<struct mqttInfo> &batchInfo);
int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo);
int TeleinfoProcess(float &iinst, float &papp, float &base);
#else
int TeleinfoSetup() {
SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time");
return -1;
};
int TeleinfoRetrieve(float &, float &, float &){
inline int TeleinfoProcess(std::vector<struct mqttInfo> &){
return 0;
}
int TeleinfoRetrieve(float &, float &, float &, std::vector<struct mqttInfo> &)
{
};
int TeleinfoProcess(float &iinst, float &papp, float &base){
return 0;
}
};
#endif

27
WifiControlSensor/Teleinfo.ino
View File

@ -13,8 +13,8 @@ int TeleinfoSetup()
return 0;
}
int TeleinfoRetrieve(float &iinst, float &papp, float &base){
int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
{
int c;
while ((c = TELESerial.read()) >= 0) {
@ -25,16 +25,16 @@ int TeleinfoRetrieve(float &iinst, float &papp, float &base){
me = me->next;
while (me) {
if (strcmp(me->name, "IINST") == 0) {
iinst = atof(me->value);
float val = atof(me->value);
batchInfo.push_back({val, TELEINFO_IINST_FEED_FORMAT, 0, 0});
}
if (strcmp(me->name, "PAPP") == 0) {
papp = atof(me->value);
float val = atof(me->value);
batchInfo.push_back({val, TELEINFO_PAPP_FEED_FORMAT, 0, 0});
}
if (strcmp(me->name, "BASE") == 0) {
float tmp = atof(me->value);
if(tmp != 0){
base = tmp;
}
float val = atof(me->value);
batchInfo.push_back({val, TELEINFO_BASE_FEED_FORMAT, 0, 0});
}
me = me->next;
}
@ -42,8 +42,7 @@ int TeleinfoRetrieve(float &iinst, float &papp, float &base){
return 0;
}
int TeleinfoRetrieve(float &iinst, float &papp, float &base,
std::vector<struct mqttInfo> &batchInfo)
int TeleinfoProcess(float &iinst, float &papp, float &base )
{
int c;
@ -56,18 +55,12 @@ int TeleinfoRetrieve(float &iinst, float &papp, float &base,
while (me) {
if (strcmp(me->name, "IINST") == 0) {
iinst = atof(me->value);
batchInfo.push_back({iinst, TELEINFO_IINST_FEED_FORMAT, 0, 0});
}
if (strcmp(me->name, "PAPP") == 0) {
papp = atof(me->value);
batchInfo.push_back({papp, TELEINFO_PAPP_FEED_FORMAT, 0, 0});
}
if (strcmp(me->name, "BASE") == 0) {
float tmp = atof(me->value);
if(tmp != 0){
base = tmp;
batchInfo.push_back({base, TELEINFO_BASE_FEED_FORMAT, 0, 0});
}
base = atof(me->value);
}
me = me->next;
}

48
WifiControlSensor/WebServer.ino
View File

@ -27,19 +27,16 @@ void WebHandleRoot() {
}
server.send(200, "text/html",
"<head><meta http-equiv=\"refresh\" content=\"" + String(CONFIG_SAMPLING_PERIOD_MS / 1000) + "\" ></head>"
"<head><meta http-equiv=\"refresh\" content=\"" + String(CONFIG_SAMPLING_PERIODE_MS / 1000) + "\" ></head>"
"<h1>You are connected to " + String(conf.host) + "</h1>"
"<fieldset>"
"<legend>Sensors</legend>"
#if defined CONFIG_ENABLE_BMP180 || defined CONFIG_ENABLE_BMP280
"" + ((BMP180IsConnected() || BMP280IsConnected()) ? "<h6>BMP180/280</h6>Temperature " + String(temp, 2) + "C<br/> Pressure " + String(pressure, 2) + "hPa<br/>" : "BMP180/280 Disconnected" ) + ""
#ifdef CONFIG_ENABLE_BMP180
"" + (BMP180IsConnected() ? "<h6>BMP180</h6>Temperature " + String(temp, 2) + "C<br/> Pressure " + String(pressure, 2) + "hPa<br/>" : "BMP180 Disconnected" ) + ""
#endif
#ifdef CONFIG_ENABLE_DHT
"" + (DHTIsConnected() ? "<h6>DHT</h6>Temperature " + String(dhtTemp, 0) + "C<br/> Humidity " + String(dhtHumidity, 0) + "%<br/>" : "DHT Disconnected" ) + ""
#endif
#ifdef CONFIG_ENABLE_SCD4X
"" + (SCD4XIsConnected() ? "<h6>SCD4X</h6>Temperature " + String(SCD4xT, 0) + "C<br/> Humidity " + String(SCD4xH, 0) + "%<br/> CO2 " + String(SCD4xCo2) + "ppm<br/>" : "SCD4X Disconnected" ) + ""
#endif
#ifdef CONFIG_ENABLE_BME680
"" + (BME680IsConnected() ? "<h6>BME680</h6>Temperature " + String(bme680T, 2) + "C<br/> Pressure " + String(bme680P, 2) + "hPa<br/> Humidity " + String(bme680H, 2) + "%<br/> Gaz " + String(bme680G, 2) + "kOhm<br/>" : "BME680 Disconnected" ) + ""
#endif
@ -48,9 +45,6 @@ void WebHandleRoot() {
#endif
#ifdef CONFIG_ENABLE_DRY_SENSOR
"Dryness " + String((dryness * 100) / 1024) + "%<br/>"
#endif
#ifdef CONFIG_ENABLE_TELEINFO
"<h6>Power Consumption</h6> Base " + String(teleBase, 2) +"Kwh<br/> AC Power " + telePapp +"VA<br/> Instant Current" + teleIinst +"A<br/>"
#endif
"</fieldset>" + gpioControlHTML + gpioObserved + pwmControlHTML + "<fieldset>"
"<legend>Settings</legend>"
@ -125,8 +119,8 @@ void WebHandleSetup() {
"<div><label for=\"ip\">Ip :</label><br/><input type=\"text\" name=\"ip\" value=\"" + (conf.ip == 0 ? WiFi.localIP().toString() : IPAddress(conf.ip).toString()) + "\" /> </div>"
"<div><label for=\"gw\">Gateway :</label><br/><input type=\"text\" name=\"gw\" value=\"" + (conf.gw == 0 ? WiFi.gatewayIP().toString() : IPAddress(conf.gw).toString()) + "\" /> </div>"
"<div><label for=\"mask\">Netmask :</label><br/><input type=\"text\" name=\"mask\" value=\"" + (conf.mask == 0 ? WiFi.subnetMask().toString() : IPAddress(conf.mask).toString()) + "\" /> </div>"
"<div><label for=\"mask\">DNS :</label><br/><input type=\"text\" name=\"dns\" value=\"" + (conf.dns == 0 ? (WiFi.dnsIP().isSet() ? WiFi.dnsIP().toString():"") : IPAddress(conf.dns).toString()) + "\" /> </div>"
"<div><label for=\"mask\">DNS2 :</label><br/><input type=\"text\" name=\"dns2\" value=\"" + (conf.dns2 == 0 ? (WiFi.dnsIP(1).isSet() ? WiFi.dnsIP(1).toString():"") : IPAddress(conf.dns2).toString()) + "\" /> </div>"
"<div><label for=\"mask\">DNS :</label><br/><input type=\"text\" name=\"dns\" value=\"" + (conf.dns == 0 ? WiFi.dnsIP().toString() : IPAddress(conf.dns).toString()) + "\" /> </div>"
"<div><label for=\"mask\">DNS2 :</label><br/><input type=\"text\" name=\"dns2\" value=\"" + (conf.dns2 == 0 ? WiFi.dnsIP(1).toString() : IPAddress(conf.dns2).toString()) + "\" /> </div>"
"</fieldset>"
"<fieldset>"
"<legend>MQTT:</legend>"
@ -135,10 +129,6 @@ void WebHandleSetup() {
"<div><label for=\"mqttPasswd\">Password :</label><br/><input type=\"password\" name=\"mqttPasswd\" style=\"border-color:red\" value=\"" + String(conf.mqttPasswd) + "\" /> </div>"
"<div><label for=\"mqttPort\">Port :</label><br/><input type=\"text\" name=\"mqttPort\" value=\"" + String(conf.mqttPort) + "\" /> (8883 for secure Mqtts) </div>"
"</fieldset>"
"<fieldset>"
"<legend>Sensor:</legend>"
"<div><label for=\"samplingPeriod\">Sampling Period (ms): </label><br/><input type=\"text\" name=\"samplingPeriod\" value=\"" + String(conf.samplingPeriod) + "\" /> </div>"
"</fieldset>"
"<div class=\"button\"> <button type=\"submit\">Save</button></div>"
"</form>");
}
@ -182,7 +172,7 @@ void WebHandleSave() {
|| !server.hasArg("mqttServer") || !server.hasArg("mqttUser") || !server.hasArg("mqttPasswd")
|| !server.hasArg("mqttPort") || !server.hasArg("ip_config") || !server.hasArg("ip")
|| !server.hasArg("gw") || !server.hasArg("mask") || !server.hasArg("dns")
|| !server.hasArg("dns2") || !server.hasArg("channel") || !server.hasArg("bssid") || !server.hasArg("samplingPeriod")) {
|| !server.hasArg("dns2") || !server.hasArg("channel") || ! server.hasArg("bssid")) {
server.send(500, "text/plain", "Bad arguments\r\n");
return;
}
@ -197,28 +187,16 @@ void WebHandleSave() {
}
}
productConfig newConf = {BOOTMODE_NORMAL,
strdup(server.arg("ssid").c_str()),
strdup(server.arg("password").c_str()),
strdup(server.arg("host").c_str()),
strdup(server.arg("mqttServer").c_str()),
strdup(server.arg("mqttUser").c_str()),
strdup(server.arg("mqttPasswd").c_str()),
server.arg("mqttPort").toInt(),
server.arg("ip_config").toInt(),
static_cast<uint32_t>(ip),
static_cast<uint32_t>(gw),
static_cast<uint32_t>(mask),
static_cast<uint32_t>(dns),
static_cast<uint32_t>(dns2),
static_cast<uint8_t>(server.arg("channel").toInt()),
strdup(server.arg("bssid").c_str()),
static_cast<uint32_t>(server.arg("samplingPeriod").toInt())};
productConfig newConf = {BOOTMODE_NORMAL, strdup(server.arg("ssid").c_str()), strdup(server.arg("password").c_str()),
strdup(server.arg("host").c_str()), strdup(server.arg("mqttServer").c_str()), strdup(server.arg("mqttUser").c_str()),
strdup(server.arg("mqttPasswd").c_str()), server.arg("mqttPort").toInt(),
server.arg("ip_config").toInt(), static_cast<uint32_t>(ip), static_cast<uint32_t>(gw),
static_cast<uint32_t>(mask), static_cast<uint32_t>(dns), static_cast<uint32_t>(dns2), static_cast<uint8_t>(server.arg("channel").toInt()), strdup(server.arg("bssid").c_str())
};
if (EepromSaveConfig(newConf) < 0) {
WebSendError("Cannot Save configuration ( Credentials too long ?Contains \";\"?)\r\n");
WebSendError("Cannot Save Credentials (Too long ?Contains \";\"?)\r\n");
return;
}
samplingPeriod = newConf.samplingPeriod;
if (WiFi.softAPIP() != IPAddress((uint32_t)0)) {
//In STA mode, we can test the AP connection
WiFi.begin(server.arg("ssid").c_str(), server.arg("password").c_str());

46
WifiControlSensor/WifiControlSensor.ino
View File

@ -43,7 +43,6 @@
#include "debug_sketch.h"
#include "BMP180.h"
#include "BMP280.h"
#include "BME680.h"
#include "BME680_BSEC.h"
#include "sensor_DHT.h"
@ -53,7 +52,6 @@
#include "Adafruit_MQTT_Client.h"
#include "EEPROM.h"
#include "Teleinfo.h"
#include "SCD4X.h"
extern "C" {
#include <user_interface.h>
@ -68,20 +66,15 @@ double temp, pressure;
float dhtTemp, dhtHumidity;
float bme680T, bme680P, bme680H, bme680G, bme680A;
float bme680BSECT, bme680BSECP, bme680BSECH, bme680BSECIaq, bme680BSECIaqAcc;
float teleIinst, telePapp, teleBase;
float SCD4xT, SCD4xH;
uint16_t SCD4xCo2;
int dryness;
uint8_t mode;
int reconfig = 0;
productConfig conf = {BOOTMODE_SETUP, NULL, NULL, NULL, NULL, NULL, NULL, 1883, 0, 0, 0, 0, 0, 0, 0, NULL, CONFIG_SAMPLING_PERIOD_MS};
productConfig conf = {BOOTMODE_SETUP, NULL, NULL, NULL, NULL, NULL, NULL, 1883, 0, 0, 0, 0, 0, 0, 0, NULL};
// Should have less that MAXSUBSCRIPTIONS elements
// MAXSUBSCRIPTIONS is defined is Adafruit_mqtt.h
const int gpioControlled[] = CONFIG_CONTROLLED_GPIO;
const int gpioObserved[] = CONFIG_OBSERVED_GPIO;
const int pwmControlled[] = CONFIG_CONTROLLED_PWM;
uint samplingPeriod = CONFIG_SAMPLING_PERIOD_MS;
uint nbCycle = UINT_MAX - 1;
/* Set these to your desired credentials. */
const char *ssid = CONFIG_SSID_NAME;
@ -140,7 +133,10 @@ void WifiSetup(productConfig conf) {
bssidConf = bssid;
}
SKETCH_DEBUG_PRINTF("Using channel %u (0==auto)\n", conf.channel );
// WA https://github.com/esp8266/Arduino/issues/2186
WiFi.persistent(false);
WiFi.mode(WIFI_OFF); // this is a temporary line, to be removed after SDK update to 1.5.4
WiFi.mode(WIFI_STA);
WiFi.begin(conf.ssid, conf.password, conf.channel, bssidConf);
while (WiFi.status() != WL_CONNECTED) {
delay(50);
@ -149,7 +145,7 @@ void WifiSetup(productConfig conf) {
reconfig = 0;
return;
}
if (connectionTry == 120) {
if (connectionTry == 60) {
SKETCH_DEBUG_PRINTLN("Cannot connect to wifi. Try without BSSID and channel");
WiFi.begin(conf.ssid, conf.password);
}
@ -281,9 +277,6 @@ void setup()
if (!BMP180Setup(CONFIG_BMP180_SDA, CONFIG_BMP180_SCL)) {
SKETCH_DEBUG_PRINTLN("BMP180 init success");
}
if (!BMP280Setup()) {
SKETCH_DEBUG_PRINTLN("BMP280 init success");
}
if (!DHTSetup(CONFIG_DHT_PIN)) {
SKETCH_DEBUG_PRINTLN("DHT init success");
}
@ -299,17 +292,14 @@ void setup()
if(!TeleinfoSetup()){
SKETCH_DEBUG_PRINTLN("Teleinfo init success");
}
if(!SCD4XSetup()){
SKETCH_DEBUG_PRINTLN("SCD4X init success");
}
WebSetupServer(mode);
}
samplingPeriod = conf.samplingPeriod;
#ifdef CONFIG_ENABLE_POWER_SAVE
wifi_set_sleep_type(LIGHT_SLEEP_T);
#endif
}
uint nbCycle = CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS;
void loop() {
if (mode == BOOTMODE_OTA) {
ArduinoOTA.handle();
@ -321,31 +311,19 @@ void loop() {
}
delay(CONFIG_WEB_DELAY_MS);
TeleinfoRetrieve(teleIinst, telePapp, teleBase);
nbCycle++;
if (nbCycle > samplingPeriod / CONFIG_WEB_DELAY_MS) {
if (nbCycle > CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS) {
std::vector<struct mqttInfo> batchInfo;
if (!BMP180GetTempAndPressure(temp, pressure)) {
SKETCH_DEBUG_PRINTF("Current %f°C Pressure %fmB\n", temp, pressure);
batchInfo.push_back({(float)temp, TEMPERATURE_FEED_FORMAT, 0, 0});
batchInfo.push_back({(float)pressure, PRESSURE_FEED_FORMAT, 0, 0});
}
if (!BMP280GetTempAndPressure(temp, pressure)) {
SKETCH_DEBUG_PRINTF("Current %f°C Pressure %fmB\n", temp, pressure);
batchInfo.push_back({(float)temp, TEMPERATURE_FEED_FORMAT, 0, 0});
batchInfo.push_back({(float)pressure, PRESSURE_FEED_FORMAT, 0, 0});
}
if (!DHTGetTempAndHumidity(dhtTemp, dhtHumidity)) {
SKETCH_DEBUG_PRINTF("Current %f°C %f%% Humidity\n", dhtTemp, dhtHumidity);
batchInfo.push_back({dhtTemp, TEMPERATURE_DHT_FEED_FORMAT, 0, 0});
batchInfo.push_back({dhtHumidity, HUMIDITY_DHT_FEED_FORMAT, 0, 0});
}
if (!SCD4XGetMeasure(SCD4xT, SCD4xH, SCD4xCo2)) {
SKETCH_DEBUG_PRINTF("Current %f°C %f Humidity, Current C02 %d\n", SCD4xT, SCD4xH, SCD4xCo2);
batchInfo.push_back({SCD4xT, SCD4X_TEMPERATURE_FEED_FORMAT, 0, 0});
batchInfo.push_back({SCD4xH, SCD4X_HUMIDITY_FEED_FORMAT, 0, 0});
batchInfo.push_back({(float)SCD4xCo2, SCD4X_CO2_FEED_FORMAT, 0, 0});
}
if (!DryGetMeasure(dryness)) {
SKETCH_DEBUG_PRINTF("Current dryness %d %%\n", (dryness * 100) / 1024);
batchInfo.push_back({(float)dryness, DRY_FEED_FORMAT, 0, 0});
@ -386,13 +364,9 @@ void loop() {
batchInfo.push_back({bme680BSECIaq, BME680_IAQ_FEED_FORMAT, 0, 0});
batchInfo.push_back({bme680BSECIaqAcc, BME680_IAQ_ACC_FEED_FORMAT, 0, 0});
}
TeleinfoRetrieve(teleIinst, telePapp, teleBase, batchInfo);
TeleinfoProcess(batchInfo);
if (mode == BOOTMODE_NORMAL)
if (MqttBatchPublish(batchInfo, conf.mqttUser, conf.host))
WifiSetup(conf);
MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
nbCycle = 0;
}
}

4
WifiControlSensor/config.h
View File

@ -9,8 +9,8 @@
#define CONFIG_WEB_DELAY_MS 100
#endif
#ifndef CONFIG_SAMPLING_PERIOD_MS
#define CONFIG_SAMPLING_PERIOD_MS 60000
#ifndef CONFIG_SAMPLING_PERIODE_MS
#define CONFIG_SAMPLING_PERIODE_MS 60000
#endif
#if defined(CONFIG_ENABLE_BME680) && defined(CONFIG_BME680_BSEC_ENABLE)

8
WifiControlSensor/config_device.h
View File

@ -30,15 +30,11 @@
//#define CONFIG_ENABLE_DHT
//#define CONFIG_DHT_PIN 2
//#define CONFIG_DHT_TYPE DHT22
//#define CONFIG_ENABLE_BMP280
//#define CONFIG_ENABLE_DRY_SENSOR
//If the dry sensor is powered by a GPIO, this GPIO could be defined here
//#define CONFIG_DRY_POWER_PIN 13
//Advised CONFIG_SAMPLING_PERIOD_MS is 5s for this sensor
//#define CONFIG_ENABLE_SCD4X
// Enable light sleep to save some power (http://bbs.espressif.com/viewtopic.php?f=6&t=133&p=485&hilit=sleep+modem#p485)
#define CONFIG_ENABLE_POWER_SAVE
@ -56,10 +52,10 @@
#define CONFIG_SETUP_GPIO 14 //D5
// Time to sleep between 2 webserver request (increase it reduce battery usage but increase latency)
#define CONFIG_WEB_DELAY_MS 800
//#define CONFIG_WEB_DELAY_MS 100
// Get sensors value every X ms
#define CONFIG_SAMPLING_PERIOD_MS 30000
#define CONFIG_SAMPLING_PERIODE_MS 30000
// Name of the SSID when in AP mode for configuration
#define CONFIG_SSID_NAME "ESPConfiguratorBureau"