WifiControlSensor/BME680.h

@@ -14,6 +14,8 @@
 //Use Default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
 
 #define SEALEVELPRESSURE_HPA (1013.25)
+#include <SFE_BMP180.h>
+#include "debug_sketch.h"
 
 int BME680GetMeasure(float &t, float &p, float &h, float &g, float &a);
 int BME680Setup();

WifiControlSensor/BME680_BSEC.ino

@@ -16,12 +16,12 @@
     generic_33v_300s_28d
 */
 const uint8_t bsec_config_iaq[] = {
-#if CONFIG_SAMPLING_PERIOD_MS == 3000
+#if CONFIG_SAMPLING_PERIODE_MS == 3000
 #include "config/generic_33v_3s_4d/bsec_iaq.txt"
-#elif CONFIG_SAMPLING_PERIOD_MS == 300000
+#elif CONFIG_SAMPLING_PERIODE_MS == 300000
 #include "config/generic_33v_300s_4d/bsec_iaq.txt"
 #else
-#error "Unsupport CONFIG_SAMPLING_PERIOD_MS (3000 and 300000 are supported)"
+#error "Unsupport CONFIG_SAMPLING_PERIODE_MS (3000 and 300000 are supported)"
 #endif
 };
 
@@ -94,7 +94,7 @@ int BME680BSECGetMeasure(float &t, float &p, float &h, float &iaq, float &iaqAcc
 {
   if (iaqSensor.run()) { // If new data is available
     t      = iaqSensor.temperature;
-    p      = iaqSensor.pressure/100;
+    p      = iaqSensor.pressure;
     h      = iaqSensor.humidity;
     iaq    = iaqSensor.iaq;
     iaqAcc = iaqSensor.iaqAccuracy;

WifiControlSensor/BMP280.h

@@ -1,15 +0,0 @@
-#pragma once
-#ifdef CONFIG_ENABLE_BMP280
-#include "debug_sketch.h"
-
-int BMP280GetTemperature(double &t);
-int BMP280GetTempAndPressure(double &t, double &p);
-int BMP280Setup();
-bool BMP280IsConnected();
-
-#else //CONFIG_ENABLE_BMP80
-int BMP280GetTemperature(double &){return -1;};
-int BMP280GetTempAndPressure(double &, double &){return -1;};
-int BMP280Setup(){SKETCH_DEBUG_PRINTLN("BMP280 is disabled at build time"); return -1;};
-bool BMP280IsConnected(){return false;};
-#endif

WifiControlSensor/BMP280.ino

@@ -1,44 +0,0 @@
-#ifdef CONFIG_ENABLE_BMP280
-#include "BMP280.h"
-#include <Adafruit_BMP280.h>
-Adafruit_BMP280 bmp;
-int bmpConnected = 0;
-
-int BMP280Setup()
-{
-	bmpConnected = bmp.begin(BMP280_ADDRESS_ALT);
-	if (!bmpConnected) {
-		SKETCH_DEBUG_PRINTLN("Cannot connect to BMP280");
-		return -1;
-	}
-	/* Default settings from datasheet. */
-	bmp.setSampling(Adafruit_BMP280::MODE_NORMAL,     /* Operating Mode. */
-			Adafruit_BMP280::SAMPLING_X2,     /* Temp. oversampling */
-			Adafruit_BMP280::SAMPLING_X16,    /* Pressure oversampling */
-			Adafruit_BMP280::FILTER_X16,      /* Filtering. */
-			Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
-	return 0;
-}
-
-bool BMP280IsConnected()
-{
-	return bmpConnected != 0;
-}
-
-int BMP280GetTemperature(double &t)
-{
-	if (!BMP280IsConnected())
-		return -1;
-	t = bmp.readTemperature();
-	return 0;
-}
-
-int BMP280GetTempAndPressure(double &t, double &p)
-{
-	if (!BMP280IsConnected())
-		return -1;
-	t = bmp.readTemperature();
-	p = bmp.readPressure()/100;
-	return 0;
-}
-#endif

WifiControlSensor/EEPROM.h

@@ -17,7 +17,6 @@ typedef struct productConfig_t {
   uint32_t dns2;
   uint8_t channel;
   char *bssid;
-  uint32_t samplingPeriod;
 
 } productConfig;
 

WifiControlSensor/EEPROM.ino

@@ -24,7 +24,7 @@ int EepromSaveConfig(productConfig &config) {
            + String(config.ip_mode) + ";"
            + config.ip + ";" + config.gw + ";" + config.mask + ";"
            + config.dns + ";" + config.dns2 + ";" + config.channel + ";"
-           + config.bssid + ";" + config.samplingPeriod + ";";
+           + config.bssid + ";";
 
   if (eeprom.length() > CONFIG_EEPROM_SIZE )
     return -EMSGSIZE;
@@ -104,8 +104,6 @@ void EepromReadConfig(productConfig &config) {
   readConfElement(&tmpString, i);
   config.channel = atoi(tmpString);
   readConfElement(&config.bssid, i);
-  readConfElement(&tmpString, i);
-  config.samplingPeriod = atoi(tmpString);
 
 }
 

WifiControlSensor/MQTT.h

@@ -21,9 +21,6 @@
 #define TELEINFO_IINST_FEED_FORMAT     "/feeds/%s/%s/teleinfo/iinst"
 #define TELEINFO_PAPP_FEED_FORMAT     "/feeds/%s/%s/teleinfo/papp"
 #define TELEINFO_BASE_FEED_FORMAT     "/feeds/%s/%s/teleinfo/base"
-#define SCD4X_TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/scd4x/temperature"
-#define SCD4X_HUMIDITY_FEED_FORMAT    "/feeds/%s/%s/scd4x/humidity"
-#define SCD4X_CO2_FEED_FORMAT         "/feeds/%s/%s/scd4x/co2"
 #ifndef CONFIG_DISABLE_MQTT
 #include "Adafruit_MQTT.h"
 

WifiControlSensor/MQTT.ino

@@ -197,17 +197,14 @@ void MqttCheckIRQ() {
 
 }
 
-void MqttCheckSubscription()
+void MqttCheckSubscription() {
-{
-  if (mqtt->getSubscriptionCount() == 0)
-    return;
   if (MqttConnect() == 0) {
     Adafruit_MQTT_Subscribe *subscription;
     while ((subscription = mqtt->readSubscription(0))) {
       int gpio = getGpioFromSubscription(subscription, "/gpio/");
       if (gpio > 0 && findIndex(gpio, gpioControlled) >= 0) {
         SKETCH_DEBUG_PRINTF("Got Subscription for GPIO %d\n", gpio);
-        char *value = (char *)subscription->lastread;
+        char *value = (char *) subscription->lastread;
         SKETCH_DEBUG_PRINTF("Receive data: %s\n", value);
         MqttChangeGpioValue(gpio, atoi(value));
       }
@@ -215,7 +212,7 @@ void MqttCheckSubscription()
       gpio = getGpioFromSubscription(subscription, "/pwm/");
       if (gpio > 0 && findIndex(gpio, pwmControlled) >= 0) {
         SKETCH_DEBUG_PRINTF("Got Subscription for PWM %d\n", gpio);
-        char *value = (char *)subscription->lastread;
+        char *value = (char *) subscription->lastread;
         SKETCH_DEBUG_PRINTF("Receive data: %s\n", value);
         MqttChangePWMValue(gpio, atoi(value));
       }

WifiControlSensor/SCD4X.h

@@ -1,23 +0,0 @@
-#pragma once
-#ifdef CONFIG_ENABLE_SCD4X
-#include "debug_sketch.h"
-
-int SCD4XGetMeasure(float &t, float &h, uint16_t &co2);
-int SCD4XSetup();
-bool SCD4XIsConnected();
-
-#else
-int SCD4XGetMeasure(float &, float &, uint16_t &)
-{
-        return -1;
-};
-int SCD4XSetup()
-{
-        SKETCH_DEBUG_PRINTLN("SCD4X is disabled at build time");
-        return -1;
-};
-bool SCD4XIsConnected()
-{
-        return false;
-};
-#endif

WifiControlSensor/SCD4X.ino

@@ -1,61 +0,0 @@
-#ifdef CONFIG_ENABLE_SCD4X
-#include "SCD4X.h"
-#include <Arduino.h>
-#include <SensirionI2CScd4x.h>
-#include <Wire.h>
-
-SensirionI2CScd4x scd4x;
-
-int SCD4XConnected = 0;
-
-int SCD4XSetup()
-{
-    Wire.begin();
-    scd4x.begin(Wire);
-
-    // Stop previous measurement
-    uint16_t error = scd4x.stopPeriodicMeasurement();
-    if (error) {
-        SKETCH_DEBUG_PRINTLN("Cannot connect to SCD4X");
-        return -1;
-    }
-
-    // Start new measurement
-    error = scd4x.startPeriodicMeasurement();
-    if (error) {
-        SKETCH_DEBUG_PRINTLN("Cannot start measurement for SCD4X");
-        return -1;
-    }
-    SCD4XConnected = 1;
-
-    return 0;
-}
-int SCD4XGetMeasure(float &temperature, float &humidity, uint16_t &co2)
-{
-    // Read Measurement
-    bool isDataReady = false;
-
-    uint16_t error = scd4x.getDataReadyFlag(isDataReady);
-    if (error) {
-        SKETCH_DEBUG_PRINTLN("Error trying to execute getDataReadyFlag() for SCD4X ");
-        return -1;
-    }
-    if (!isDataReady) {
-        return -1;
-    }
-    error = scd4x.readMeasurement(co2, temperature, humidity);
-    if (error || co2 == 0) {
-        char errorMsg[256];
-        SKETCH_DEBUG_PRINT("Error with reading measurement. Error : ");
-        errorToString(error, errorMsg, sizeof(errorMsg));
-        SKETCH_DEBUG_PRINTF(" Co2: %d\n", co2);
-
-        return -1;
-    }
-    return 0;
-}
-bool SCD4XIsConnected()
-{
-    return SCD4XConnected != 0;
-}
-#endif

WifiControlSensor/Teleinfo.h

@@ -4,20 +4,18 @@
 #ifdef CONFIG_ENABLE_TELEINFO
 #include <LibTeleinfo.h>
 int TeleinfoSetup();
-int TeleinfoRetrieve(float &iinst, float &papp, float &base);
+int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo);
-int TeleinfoRetrieve(float &iinst, float &papp, float &base,
+int TeleinfoProcess(float &iinst, float &papp, float &base);
-                    std::vector<struct mqttInfo> &batchInfo);
 #else
 int TeleinfoSetup() {
   SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time");
   return -1;
 };
 
-int TeleinfoRetrieve(float &, float &, float &){
+inline int TeleinfoProcess(std::vector<struct mqttInfo> &){
-  return 0;
+    return 0;
-}
+};
-int TeleinfoRetrieve(float &, float &, float &, std::vector<struct mqttInfo> &)
+int TeleinfoProcess(float &iinst, float &papp, float &base){
-{
+    return 0;
-  return 0;
+};
-}
 #endif

WifiControlSensor/Teleinfo.ino

@@ -13,8 +13,8 @@ int TeleinfoSetup()
   return 0;
 }
 
-
+int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
-int TeleinfoRetrieve(float &iinst, float &papp, float &base){
+{
   int c;
 
   while ((c = TELESerial.read()) >= 0) {
@@ -25,16 +25,16 @@ int TeleinfoRetrieve(float &iinst, float &papp, float &base){
     me = me->next;
   while (me) {
     if (strcmp(me->name, "IINST") == 0) {
-      iinst = atof(me->value);
+      float val = atof(me->value);
+      batchInfo.push_back({val, TELEINFO_IINST_FEED_FORMAT, 0, 0});
     }
     if (strcmp(me->name, "PAPP") == 0) {
-      papp = atof(me->value);
+      float val = atof(me->value);
+      batchInfo.push_back({val, TELEINFO_PAPP_FEED_FORMAT, 0, 0});
     }
     if (strcmp(me->name, "BASE") == 0) {
-      float tmp = atof(me->value);
+      float val = atof(me->value);
-      if(tmp != 0){
+      batchInfo.push_back({val, TELEINFO_BASE_FEED_FORMAT, 0, 0});
-        base = tmp;
-      }
     }
     me = me->next;
   }
@@ -42,8 +42,7 @@ int TeleinfoRetrieve(float &iinst, float &papp, float &base){
   return 0;
 }
 
-int TeleinfoRetrieve(float &iinst, float &papp, float &base,
+int TeleinfoProcess(float &iinst, float &papp, float &base )
-                    std::vector<struct mqttInfo> &batchInfo)
 {
   int c;
 
@@ -56,18 +55,12 @@ int TeleinfoRetrieve(float &iinst, float &papp, float &base,
   while (me) {
     if (strcmp(me->name, "IINST") == 0) {
       iinst = atof(me->value);
-      batchInfo.push_back({iinst, TELEINFO_IINST_FEED_FORMAT, 0, 0});
     }
     if (strcmp(me->name, "PAPP") == 0) {
       papp = atof(me->value);
-      batchInfo.push_back({papp, TELEINFO_PAPP_FEED_FORMAT, 0, 0});
     }
     if (strcmp(me->name, "BASE") == 0) {
-      float tmp = atof(me->value);
+      base = atof(me->value);
-      if(tmp != 0){
-        base = tmp;
-        batchInfo.push_back({base, TELEINFO_BASE_FEED_FORMAT, 0, 0});
-      }
     }
     me = me->next;
   }

WifiControlSensor/WebServer.ino

@@ -27,19 +27,16 @@ void WebHandleRoot() {
   }
 
   server.send(200, "text/html",
-              "<head><meta http-equiv=\"refresh\" content=\"" + String(CONFIG_SAMPLING_PERIOD_MS / 1000) + "\" ></head>"
+              "<head><meta http-equiv=\"refresh\" content=\"" + String(CONFIG_SAMPLING_PERIODE_MS / 1000) + "\" ></head>"
               "<h1>You are connected to " + String(conf.host) + "</h1>"
               "<fieldset>"
               "<legend>Sensors</legend>"
-#if defined CONFIG_ENABLE_BMP180 || defined CONFIG_ENABLE_BMP280
+#ifdef CONFIG_ENABLE_BMP180
-              "" + ((BMP180IsConnected() || BMP280IsConnected()) ? "<h6>BMP180/280</h6>Temperature " + String(temp, 2) + "C<br/> Pressure " + String(pressure, 2) + "hPa<br/>" : "BMP180/280 Disconnected"  ) + ""
+              "" + (BMP180IsConnected() ? "<h6>BMP180</h6>Temperature " + String(temp, 2) + "C<br/> Pressure " + String(pressure, 2) + "hPa<br/>" : "BMP180 Disconnected"  ) + ""
 #endif
 #ifdef CONFIG_ENABLE_DHT
               "" + (DHTIsConnected() ? "<h6>DHT</h6>Temperature " + String(dhtTemp, 0) + "C<br/> Humidity " + String(dhtHumidity, 0) + "%<br/>" : "DHT Disconnected"  ) + ""
 #endif
-#ifdef CONFIG_ENABLE_SCD4X
-              "" + (SCD4XIsConnected() ? "<h6>SCD4X</h6>Temperature " + String(SCD4xT, 0) + "C<br/> Humidity " + String(SCD4xH, 0) + "%<br/> CO2 " + String(SCD4xCo2) + "ppm<br/>" : "SCD4X Disconnected"  ) + ""
-#endif
 #ifdef CONFIG_ENABLE_BME680
               "" + (BME680IsConnected() ? "<h6>BME680</h6>Temperature " + String(bme680T, 2) + "C<br/> Pressure " + String(bme680P, 2) + "hPa<br/> Humidity " + String(bme680H, 2) + "%<br/> Gaz " +  String(bme680G, 2) + "kOhm<br/>" : "BME680 Disconnected"  ) + ""
 #endif
@@ -48,9 +45,6 @@ void WebHandleRoot() {
 #endif
 #ifdef CONFIG_ENABLE_DRY_SENSOR
               "Dryness " + String((dryness * 100) / 1024) + "%<br/>"
-#endif
-#ifdef CONFIG_ENABLE_TELEINFO
-              "<h6>Power Consumption</h6> Base " + String(teleBase, 2) +"Kwh<br/> AC Power " + telePapp +"VA<br/> Instant Current" +  teleIinst +"A<br/>"
 #endif
               "</fieldset>" + gpioControlHTML + gpioObserved + pwmControlHTML + "<fieldset>"
               "<legend>Settings</legend>"
@@ -125,8 +119,8 @@ void WebHandleSetup() {
               "<div><label for=\"ip\">Ip :</label><br/><input type=\"text\" name=\"ip\" value=\"" + (conf.ip == 0 ? WiFi.localIP().toString() : IPAddress(conf.ip).toString()) + "\" /> </div>"
               "<div><label for=\"gw\">Gateway :</label><br/><input type=\"text\" name=\"gw\" value=\"" + (conf.gw == 0 ? WiFi.gatewayIP().toString() : IPAddress(conf.gw).toString()) + "\" /> </div>"
               "<div><label for=\"mask\">Netmask :</label><br/><input type=\"text\" name=\"mask\" value=\"" + (conf.mask == 0 ? WiFi.subnetMask().toString() : IPAddress(conf.mask).toString()) + "\" /> </div>"
-              "<div><label for=\"mask\">DNS :</label><br/><input type=\"text\" name=\"dns\" value=\"" + (conf.dns == 0 ? (WiFi.dnsIP().isSet() ? WiFi.dnsIP().toString():"") : IPAddress(conf.dns).toString()) + "\" /> </div>"
+              "<div><label for=\"mask\">DNS :</label><br/><input type=\"text\" name=\"dns\" value=\"" + (conf.dns == 0 ? WiFi.dnsIP().toString() : IPAddress(conf.dns).toString()) + "\" /> </div>"
-              "<div><label for=\"mask\">DNS2 :</label><br/><input type=\"text\" name=\"dns2\" value=\"" + (conf.dns2 == 0 ? (WiFi.dnsIP(1).isSet() ? WiFi.dnsIP(1).toString():"") : IPAddress(conf.dns2).toString()) + "\" /> </div>"
+              "<div><label for=\"mask\">DNS2 :</label><br/><input type=\"text\" name=\"dns2\" value=\"" + (conf.dns2 == 0 ? WiFi.dnsIP(1).toString() : IPAddress(conf.dns2).toString()) + "\" /> </div>"
               "</fieldset>"
               "<fieldset>"
               "<legend>MQTT:</legend>"
@@ -135,10 +129,6 @@ void WebHandleSetup() {
               "<div><label for=\"mqttPasswd\">Password :</label><br/><input type=\"password\" name=\"mqttPasswd\" style=\"border-color:red\" value=\"" + String(conf.mqttPasswd) + "\" /> </div>"
               "<div><label for=\"mqttPort\">Port :</label><br/><input type=\"text\" name=\"mqttPort\" value=\"" + String(conf.mqttPort) + "\" /> (8883 for secure Mqtts) </div>"
               "</fieldset>"
-              "<fieldset>"
-              "<legend>Sensor:</legend>"
-              "<div><label for=\"samplingPeriod\">Sampling Period (ms): </label><br/><input type=\"text\" name=\"samplingPeriod\" value=\"" + String(conf.samplingPeriod) + "\" /> </div>"
-              "</fieldset>"
               "<div class=\"button\"> <button type=\"submit\">Save</button></div>"
               "</form>");
 }
@@ -182,7 +172,7 @@ void WebHandleSave() {
       || !server.hasArg("mqttServer") || !server.hasArg("mqttUser") || !server.hasArg("mqttPasswd")
       || !server.hasArg("mqttPort") || !server.hasArg("ip_config") || !server.hasArg("ip")
       || !server.hasArg("gw") || !server.hasArg("mask") || !server.hasArg("dns")
-      || !server.hasArg("dns2") || !server.hasArg("channel") || !server.hasArg("bssid") || !server.hasArg("samplingPeriod")) {
+      || !server.hasArg("dns2") || !server.hasArg("channel") || ! server.hasArg("bssid")) {
     server.send(500, "text/plain", "Bad arguments\r\n");
     return;
   }
@@ -197,28 +187,16 @@ void WebHandleSave() {
     }
   }
 
-  productConfig newConf = {BOOTMODE_NORMAL,
+  productConfig newConf = {BOOTMODE_NORMAL, strdup(server.arg("ssid").c_str()), strdup(server.arg("password").c_str()),
-                           strdup(server.arg("ssid").c_str()),
+                           strdup(server.arg("host").c_str()), strdup(server.arg("mqttServer").c_str()), strdup(server.arg("mqttUser").c_str()),
-                           strdup(server.arg("password").c_str()),
+                           strdup(server.arg("mqttPasswd").c_str()), server.arg("mqttPort").toInt(),
-                           strdup(server.arg("host").c_str()),
+                           server.arg("ip_config").toInt(), static_cast<uint32_t>(ip), static_cast<uint32_t>(gw),
-                           strdup(server.arg("mqttServer").c_str()),
+                           static_cast<uint32_t>(mask), static_cast<uint32_t>(dns), static_cast<uint32_t>(dns2), static_cast<uint8_t>(server.arg("channel").toInt()), strdup(server.arg("bssid").c_str())
-                           strdup(server.arg("mqttUser").c_str()),
+                          };
-                           strdup(server.arg("mqttPasswd").c_str()),
-                           server.arg("mqttPort").toInt(),
-                           server.arg("ip_config").toInt(),
-                           static_cast<uint32_t>(ip),
-                           static_cast<uint32_t>(gw),
-                           static_cast<uint32_t>(mask),
-                           static_cast<uint32_t>(dns),
-                           static_cast<uint32_t>(dns2),
-                           static_cast<uint8_t>(server.arg("channel").toInt()),
-                           strdup(server.arg("bssid").c_str()),
-                           static_cast<uint32_t>(server.arg("samplingPeriod").toInt())};
   if (EepromSaveConfig(newConf) < 0) {
-    WebSendError("Cannot Save configuration ( Credentials too long ?Contains \";\"?)\r\n");
+    WebSendError("Cannot Save Credentials (Too long ?Contains \";\"?)\r\n");
     return;
   }
-  samplingPeriod = newConf.samplingPeriod;
   if (WiFi.softAPIP() != IPAddress((uint32_t)0)) {
     //In STA mode, we can test the AP connection
     WiFi.begin(server.arg("ssid").c_str(), server.arg("password").c_str());

WifiControlSensor/WifiControlSensor.ino

@@ -43,7 +43,6 @@
 
 #include "debug_sketch.h"
 #include "BMP180.h"
-#include "BMP280.h"
 #include "BME680.h"
 #include "BME680_BSEC.h"
 #include "sensor_DHT.h"
@@ -53,7 +52,6 @@
 #include "Adafruit_MQTT_Client.h"
 #include "EEPROM.h"
 #include "Teleinfo.h"
-#include "SCD4X.h"
 
 extern "C" {
 #include <user_interface.h>
@@ -68,20 +66,15 @@ double temp, pressure;
 float dhtTemp, dhtHumidity;
 float bme680T, bme680P, bme680H, bme680G, bme680A;
 float bme680BSECT, bme680BSECP, bme680BSECH, bme680BSECIaq, bme680BSECIaqAcc;
-float teleIinst, telePapp, teleBase;
-float SCD4xT, SCD4xH;
-uint16_t SCD4xCo2;
 int dryness;
 uint8_t mode;
 int reconfig = 0;
-productConfig conf = {BOOTMODE_SETUP, NULL, NULL, NULL, NULL, NULL, NULL, 1883, 0, 0, 0, 0, 0, 0, 0, NULL, CONFIG_SAMPLING_PERIOD_MS};
+productConfig conf = {BOOTMODE_SETUP, NULL, NULL, NULL, NULL, NULL, NULL, 1883, 0, 0, 0, 0, 0, 0, 0, NULL};
 // Should have less that MAXSUBSCRIPTIONS elements
 // MAXSUBSCRIPTIONS is defined is Adafruit_mqtt.h
 const int gpioControlled[] = CONFIG_CONTROLLED_GPIO;
 const int gpioObserved[] = CONFIG_OBSERVED_GPIO;
 const int pwmControlled[] = CONFIG_CONTROLLED_PWM;
-uint samplingPeriod = CONFIG_SAMPLING_PERIOD_MS;
-uint nbCycle = UINT_MAX - 1;
 
 /* Set these to your desired credentials. */
 const char *ssid = CONFIG_SSID_NAME;
@@ -140,7 +133,10 @@ void WifiSetup(productConfig conf) {
       bssidConf = bssid;
     }
 
-    SKETCH_DEBUG_PRINTF("Using channel %u (0==auto)\n", conf.channel );
+    // WA https://github.com/esp8266/Arduino/issues/2186
+    WiFi.persistent(false);
+    WiFi.mode(WIFI_OFF);   // this is a temporary line, to be removed after SDK update to 1.5.4
+    WiFi.mode(WIFI_STA);
     WiFi.begin(conf.ssid, conf.password, conf.channel, bssidConf);
     while (WiFi.status() != WL_CONNECTED) {
       delay(50);
@@ -149,7 +145,7 @@ void WifiSetup(productConfig conf) {
         reconfig = 0;
         return;
       }
-      if (connectionTry == 120) {
+      if (connectionTry == 60) {
         SKETCH_DEBUG_PRINTLN("Cannot connect to wifi. Try without BSSID and channel");
         WiFi.begin(conf.ssid, conf.password);
       }
@@ -281,9 +277,6 @@ void setup()
     if (!BMP180Setup(CONFIG_BMP180_SDA, CONFIG_BMP180_SCL)) {
       SKETCH_DEBUG_PRINTLN("BMP180 init success");
     }
-    if (!BMP280Setup()) {
-      SKETCH_DEBUG_PRINTLN("BMP280 init success");
-    }
     if (!DHTSetup(CONFIG_DHT_PIN)) {
       SKETCH_DEBUG_PRINTLN("DHT init success");
     }
@@ -299,17 +292,14 @@ void setup()
     if(!TeleinfoSetup()){
       SKETCH_DEBUG_PRINTLN("Teleinfo init success");
     }
-    if(!SCD4XSetup()){
-      SKETCH_DEBUG_PRINTLN("SCD4X init success");
-    }
     WebSetupServer(mode);
   }
-  samplingPeriod = conf.samplingPeriod;
 #ifdef CONFIG_ENABLE_POWER_SAVE
   wifi_set_sleep_type(LIGHT_SLEEP_T);
 #endif
 }
 
+uint nbCycle = CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS;
 void loop() {
   if (mode == BOOTMODE_OTA) {
     ArduinoOTA.handle();
@@ -321,31 +311,19 @@ void loop() {
     }
     delay(CONFIG_WEB_DELAY_MS);
 
-    TeleinfoRetrieve(teleIinst, telePapp, teleBase);
     nbCycle++;
-    if (nbCycle > samplingPeriod / CONFIG_WEB_DELAY_MS) {
+    if (nbCycle > CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS) {
       std::vector<struct mqttInfo> batchInfo;
       if (!BMP180GetTempAndPressure(temp, pressure)) {
         SKETCH_DEBUG_PRINTF("Current %f°C Pressure %fmB\n", temp, pressure);
         batchInfo.push_back({(float)temp, TEMPERATURE_FEED_FORMAT, 0, 0});
         batchInfo.push_back({(float)pressure, PRESSURE_FEED_FORMAT, 0, 0});
       }
-      if (!BMP280GetTempAndPressure(temp, pressure)) {
-        SKETCH_DEBUG_PRINTF("Current %f°C Pressure %fmB\n", temp, pressure);
-        batchInfo.push_back({(float)temp, TEMPERATURE_FEED_FORMAT, 0, 0});
-        batchInfo.push_back({(float)pressure, PRESSURE_FEED_FORMAT, 0, 0});
-      }
       if (!DHTGetTempAndHumidity(dhtTemp, dhtHumidity)) {
         SKETCH_DEBUG_PRINTF("Current %f°C %f%% Humidity\n", dhtTemp, dhtHumidity);
         batchInfo.push_back({dhtTemp, TEMPERATURE_DHT_FEED_FORMAT, 0, 0});
         batchInfo.push_back({dhtHumidity, HUMIDITY_DHT_FEED_FORMAT, 0, 0});
       }
-      if (!SCD4XGetMeasure(SCD4xT, SCD4xH, SCD4xCo2)) {
-        SKETCH_DEBUG_PRINTF("Current %f°C %f Humidity, Current C02 %d\n", SCD4xT, SCD4xH, SCD4xCo2);
-        batchInfo.push_back({SCD4xT, SCD4X_TEMPERATURE_FEED_FORMAT, 0, 0});
-        batchInfo.push_back({SCD4xH, SCD4X_HUMIDITY_FEED_FORMAT, 0, 0});
-        batchInfo.push_back({(float)SCD4xCo2, SCD4X_CO2_FEED_FORMAT, 0, 0});
-      }
       if (!DryGetMeasure(dryness)) {
         SKETCH_DEBUG_PRINTF("Current dryness %d %%\n", (dryness * 100) / 1024);
         batchInfo.push_back({(float)dryness, DRY_FEED_FORMAT, 0, 0});
@@ -386,13 +364,9 @@ void loop() {
         batchInfo.push_back({bme680BSECIaq, BME680_IAQ_FEED_FORMAT, 0, 0});
         batchInfo.push_back({bme680BSECIaqAcc, BME680_IAQ_ACC_FEED_FORMAT, 0, 0});
       }
-
+      TeleinfoProcess(batchInfo);
-      TeleinfoRetrieve(teleIinst, telePapp, teleBase, batchInfo);
-
       if (mode == BOOTMODE_NORMAL)
-        if (MqttBatchPublish(batchInfo, conf.mqttUser, conf.host))
+        MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
-          WifiSetup(conf);
-
       nbCycle = 0;
     }
   }

WifiControlSensor/config.h

@@ -9,8 +9,8 @@
 #define CONFIG_WEB_DELAY_MS 100
 #endif
 
-#ifndef CONFIG_SAMPLING_PERIOD_MS
+#ifndef CONFIG_SAMPLING_PERIODE_MS
-#define CONFIG_SAMPLING_PERIOD_MS 60000
+#define CONFIG_SAMPLING_PERIODE_MS 60000
 #endif
 
 #if defined(CONFIG_ENABLE_BME680) && defined(CONFIG_BME680_BSEC_ENABLE)

WifiControlSensor/config_device.h

@@ -30,15 +30,11 @@
 //#define CONFIG_ENABLE_DHT
 //#define CONFIG_DHT_PIN 2
 //#define CONFIG_DHT_TYPE DHT22
-//#define CONFIG_ENABLE_BMP280
 
 //#define CONFIG_ENABLE_DRY_SENSOR
 //If the dry sensor is powered by a GPIO, this GPIO could be defined here
 //#define CONFIG_DRY_POWER_PIN 13
 
-//Advised CONFIG_SAMPLING_PERIOD_MS is 5s for this sensor
-//#define CONFIG_ENABLE_SCD4X
-
 // Enable light sleep to save some power (http://bbs.espressif.com/viewtopic.php?f=6&t=133&p=485&hilit=sleep+modem#p485)
 #define CONFIG_ENABLE_POWER_SAVE
 
@@ -48,7 +44,7 @@
 // Long press on this button will put device in setup mode at runtime
 #define CONFIG_SETUP_BUTTON 0
 
-// Teleinfo https://github.com/hallard/LibTeleinfo/
+// Teleinfo https://github.com/hallard/LibTeleinfo/ 
 #define CONFIG_ENABLE_TELEINFO
 
 /* DEFAULT VALUE ALSO DEFINED IN CONFIG.H */
@@ -56,10 +52,10 @@
 #define CONFIG_SETUP_GPIO 14 //D5
 
 // Time to sleep between 2 webserver request (increase it reduce battery usage but increase latency)
-#define CONFIG_WEB_DELAY_MS 800
+//#define CONFIG_WEB_DELAY_MS 100
 
 // Get sensors value every X ms
-#define CONFIG_SAMPLING_PERIOD_MS 30000
+#define CONFIG_SAMPLING_PERIODE_MS 30000
 
 // Name of the SSID when in AP mode for configuration
 #define CONFIG_SSID_NAME "ESPConfiguratorBureau"