Compare commits
6 Commits
cbce043f30
...
7b1d9ae63e
Author | SHA1 | Date | |
---|---|---|---|
|
7b1d9ae63e | ||
|
73d6e17dc1 | ||
|
1b52a80b15 | ||
|
8f471fc0bf | ||
|
8fed8bedf4 | ||
|
9110ae3589 |
@ -18,6 +18,9 @@
|
|||||||
#define BME680_ALT_FEED_FORMAT "/feeds/%s/%s/bme680/alt"
|
#define BME680_ALT_FEED_FORMAT "/feeds/%s/%s/bme680/alt"
|
||||||
#define BME680_IAQ_FEED_FORMAT "/feeds/%s/%s/bme680/iaq"
|
#define BME680_IAQ_FEED_FORMAT "/feeds/%s/%s/bme680/iaq"
|
||||||
#define BME680_IAQ_ACC_FEED_FORMAT "/feeds/%s/%s/bme680/iaqAcc"
|
#define BME680_IAQ_ACC_FEED_FORMAT "/feeds/%s/%s/bme680/iaqAcc"
|
||||||
|
#define TELEINFO_IINST_FEED_FORMAT "/feeds/%s/%s/teleinfo/iinst"
|
||||||
|
#define TELEINFO_PAPP_FEED_FORMAT "/feeds/%s/%s/teleinfo/papp"
|
||||||
|
#define TELEINFO_BASE_FEED_FORMAT "/feeds/%s/%s/teleinfo/base"
|
||||||
#ifndef CONFIG_DISABLE_MQTT
|
#ifndef CONFIG_DISABLE_MQTT
|
||||||
#include "Adafruit_MQTT.h"
|
#include "Adafruit_MQTT.h"
|
||||||
|
|
||||||
|
@ -197,7 +197,10 @@ void MqttCheckIRQ() {
|
|||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
void MqttCheckSubscription() {
|
void MqttCheckSubscription()
|
||||||
|
{
|
||||||
|
if (mqtt->getSubscriptionCount() == 0)
|
||||||
|
return;
|
||||||
if (MqttConnect() == 0) {
|
if (MqttConnect() == 0) {
|
||||||
Adafruit_MQTT_Subscribe *subscription;
|
Adafruit_MQTT_Subscribe *subscription;
|
||||||
while ((subscription = mqtt->readSubscription(0))) {
|
while ((subscription = mqtt->readSubscription(0))) {
|
||||||
|
21
WifiControlSensor/Teleinfo.h
Normal file
21
WifiControlSensor/Teleinfo.h
Normal file
@ -0,0 +1,21 @@
|
|||||||
|
#pragma once
|
||||||
|
#include "debug_sketch.h"
|
||||||
|
|
||||||
|
#ifdef CONFIG_ENABLE_TELEINFO
|
||||||
|
#include <LibTeleinfo.h>
|
||||||
|
int TeleinfoSetup();
|
||||||
|
int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo);
|
||||||
|
int TeleinfoProcess(float &iinst, float &papp, float &base);
|
||||||
|
#else
|
||||||
|
int TeleinfoSetup() {
|
||||||
|
SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time");
|
||||||
|
return -1;
|
||||||
|
};
|
||||||
|
|
||||||
|
inline int TeleinfoProcess(std::vector<struct mqttInfo> &){
|
||||||
|
return 0;
|
||||||
|
};
|
||||||
|
int TeleinfoProcess(float &, float &, float &){
|
||||||
|
return 0;
|
||||||
|
};
|
||||||
|
#endif
|
70
WifiControlSensor/Teleinfo.ino
Normal file
70
WifiControlSensor/Teleinfo.ino
Normal file
@ -0,0 +1,70 @@
|
|||||||
|
#ifdef CONFIG_ENABLE_TELEINFO
|
||||||
|
#include "Teleinfo.h"
|
||||||
|
#include <LibTeleinfo.h>
|
||||||
|
#define TELESerial Serial
|
||||||
|
TInfo tinfo;
|
||||||
|
|
||||||
|
int TeleinfoSetup()
|
||||||
|
{
|
||||||
|
TELESerial.begin(1200, SERIAL_7E1);
|
||||||
|
|
||||||
|
tinfo.init();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
|
||||||
|
{
|
||||||
|
int c;
|
||||||
|
|
||||||
|
while ((c = TELESerial.read()) >= 0) {
|
||||||
|
tinfo.process(c);
|
||||||
|
}
|
||||||
|
ValueList *me = tinfo.getList();
|
||||||
|
if (me)
|
||||||
|
me = me->next;
|
||||||
|
while (me) {
|
||||||
|
if (strcmp(me->name, "IINST") == 0) {
|
||||||
|
float val = atof(me->value);
|
||||||
|
batchInfo.push_back({val, TELEINFO_IINST_FEED_FORMAT, 0, 0});
|
||||||
|
}
|
||||||
|
if (strcmp(me->name, "PAPP") == 0) {
|
||||||
|
float val = atof(me->value);
|
||||||
|
batchInfo.push_back({val, TELEINFO_PAPP_FEED_FORMAT, 0, 0});
|
||||||
|
}
|
||||||
|
if (strcmp(me->name, "BASE") == 0) {
|
||||||
|
float val = atof(me->value);
|
||||||
|
batchInfo.push_back({val, TELEINFO_BASE_FEED_FORMAT, 0, 0});
|
||||||
|
}
|
||||||
|
me = me->next;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int TeleinfoProcess(float &iinst, float &papp, float &base )
|
||||||
|
{
|
||||||
|
int c;
|
||||||
|
|
||||||
|
while ((c = TELESerial.read()) >= 0) {
|
||||||
|
tinfo.process(c);
|
||||||
|
}
|
||||||
|
ValueList *me = tinfo.getList();
|
||||||
|
if (me)
|
||||||
|
me = me->next;
|
||||||
|
while (me) {
|
||||||
|
if (strcmp(me->name, "IINST") == 0) {
|
||||||
|
iinst = atof(me->value);
|
||||||
|
}
|
||||||
|
if (strcmp(me->name, "PAPP") == 0) {
|
||||||
|
papp = atof(me->value);
|
||||||
|
}
|
||||||
|
if (strcmp(me->name, "BASE") == 0) {
|
||||||
|
base = atof(me->value);
|
||||||
|
}
|
||||||
|
me = me->next;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
@ -51,6 +51,7 @@
|
|||||||
#include "Adafruit_MQTT.h"
|
#include "Adafruit_MQTT.h"
|
||||||
#include "Adafruit_MQTT_Client.h"
|
#include "Adafruit_MQTT_Client.h"
|
||||||
#include "EEPROM.h"
|
#include "EEPROM.h"
|
||||||
|
#include "Teleinfo.h"
|
||||||
|
|
||||||
extern "C" {
|
extern "C" {
|
||||||
#include <user_interface.h>
|
#include <user_interface.h>
|
||||||
@ -68,7 +69,7 @@ float bme680BSECT, bme680BSECP, bme680BSECH, bme680BSECIaq, bme680BSECIaqAcc;
|
|||||||
int dryness;
|
int dryness;
|
||||||
uint8_t mode;
|
uint8_t mode;
|
||||||
int reconfig = 0;
|
int reconfig = 0;
|
||||||
productConfig conf = {BOOTMODE_SETUP, "", "", "", "", "", "", 1883, 0, 0, 0, 0, 0, 0, 0, ""};
|
productConfig conf = {BOOTMODE_SETUP, NULL, NULL, NULL, NULL, NULL, NULL, 1883, 0, 0, 0, 0, 0, 0, 0, NULL};
|
||||||
// Should have less that MAXSUBSCRIPTIONS elements
|
// Should have less that MAXSUBSCRIPTIONS elements
|
||||||
// MAXSUBSCRIPTIONS is defined is Adafruit_mqtt.h
|
// MAXSUBSCRIPTIONS is defined is Adafruit_mqtt.h
|
||||||
const int gpioControlled[] = CONFIG_CONTROLLED_GPIO;
|
const int gpioControlled[] = CONFIG_CONTROLLED_GPIO;
|
||||||
@ -215,7 +216,8 @@ void OTASetup() {
|
|||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
void setup() {
|
void setup()
|
||||||
|
{
|
||||||
#ifdef CONFIG_SETUP_BUTTON
|
#ifdef CONFIG_SETUP_BUTTON
|
||||||
new HIB(CONFIG_SETUP_BUTTON, HIGH, NULL, NULL, onLongButtonPressed);
|
new HIB(CONFIG_SETUP_BUTTON, HIGH, NULL, NULL, onLongButtonPressed);
|
||||||
#endif
|
#endif
|
||||||
@ -226,11 +228,15 @@ void setup() {
|
|||||||
SKETCH_DEBUG_PRINTLN();
|
SKETCH_DEBUG_PRINTLN();
|
||||||
|
|
||||||
// Get GPIO 3 Status
|
// Get GPIO 3 Status
|
||||||
|
#if CONFIG_SERIAL_SHOULD_SWAP
|
||||||
|
SKETCH_DEBUG_PRINTLN("SWAP UART");
|
||||||
Serial.swap(); // Switch Serial on GPIO 13 & 15
|
Serial.swap(); // Switch Serial on GPIO 13 & 15
|
||||||
|
#endif
|
||||||
pinMode(CONFIG_SETUP_GPIO, INPUT_PULLUP);
|
pinMode(CONFIG_SETUP_GPIO, INPUT_PULLUP);
|
||||||
int txStatus = digitalRead(CONFIG_SETUP_GPIO);
|
int txStatus = digitalRead(CONFIG_SETUP_GPIO);
|
||||||
#ifndef CONFIG_ENABLE_EXTRA_GPIO
|
#if !defined(CONFIG_ENABLE_EXTRA_GPIO) && CONFIG_SERIAL_SHOULD_SWAP
|
||||||
Serial.swap(); // Switch back on GPIO 1 & 3
|
Serial.swap(); // Switch back on GPIO 1 & 3
|
||||||
|
SKETCH_DEBUG_PRINTLN("SWAP UART");
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
EEPROM.begin(CONFIG_EEPROM_SIZE);
|
EEPROM.begin(CONFIG_EEPROM_SIZE);
|
||||||
@ -280,6 +286,9 @@ void setup() {
|
|||||||
if(!BME680BSECSetup()){
|
if(!BME680BSECSetup()){
|
||||||
SKETCH_DEBUG_PRINTLN("BME680 with BSEC init success");
|
SKETCH_DEBUG_PRINTLN("BME680 with BSEC init success");
|
||||||
}
|
}
|
||||||
|
if(!TeleinfoSetup()){
|
||||||
|
SKETCH_DEBUG_PRINTLN("Teleinfo init success");
|
||||||
|
}
|
||||||
WebSetupServer(mode);
|
WebSetupServer(mode);
|
||||||
}
|
}
|
||||||
#ifdef CONFIG_ENABLE_POWER_SAVE
|
#ifdef CONFIG_ENABLE_POWER_SAVE
|
||||||
@ -352,7 +361,7 @@ void loop() {
|
|||||||
batchInfo.push_back({bme680BSECIaq, BME680_IAQ_FEED_FORMAT, 0, 0});
|
batchInfo.push_back({bme680BSECIaq, BME680_IAQ_FEED_FORMAT, 0, 0});
|
||||||
batchInfo.push_back({bme680BSECIaqAcc, BME680_IAQ_ACC_FEED_FORMAT, 0, 0});
|
batchInfo.push_back({bme680BSECIaqAcc, BME680_IAQ_ACC_FEED_FORMAT, 0, 0});
|
||||||
}
|
}
|
||||||
|
TeleinfoProcess(batchInfo);
|
||||||
if (mode == BOOTMODE_NORMAL)
|
if (mode == BOOTMODE_NORMAL)
|
||||||
MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
|
MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
|
||||||
nbCycle = 0;
|
nbCycle = 0;
|
||||||
|
@ -64,9 +64,24 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef CONFIG_SETUP_GPIO
|
#ifndef CONFIG_SETUP_GPIO
|
||||||
#define CONFIG_SETUP_GPIO 3
|
#define CONFIG_SETUP_GPIO 14
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifndef CONFIG_DHT_TYPE
|
#ifndef CONFIG_DHT_TYPE
|
||||||
#define CONFIG_DHT_TYPE DHT11
|
#define CONFIG_DHT_TYPE DHT11
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#if CONFIG_SETUP_GPIO == 3 || CONFIG_SETUP_GPIO == 1
|
||||||
|
#define CONFIG_SERIAL_SHOULD_SWAP
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(CONFIG_ENABLE_TELEINFO)
|
||||||
|
#warning "TELEINFO is using SERIAL for communication. Debug will be on Serial1 (D4)"
|
||||||
|
#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial1
|
||||||
|
#if defined(CONFIG_SERIAL_SHOULD_SWAP)
|
||||||
|
#error "When enabling TELEINFO, SERIAL_SHOULD_SWAP cannot be enabled (SETUP_GPIO == 1 or 3)"
|
||||||
|
#endif
|
||||||
|
#if defined(CONFIG_ENABLE_EXTRA_GPIO)
|
||||||
|
#error "When enabling TELEINFO, ENABLE_EXTRA_CPIO cannot be enabled"
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
@ -15,7 +15,7 @@
|
|||||||
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
|
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
|
||||||
// It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
|
// It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
|
||||||
// Should be powered by 3.3v and sampled every 3sec or 300s (Or you should adapt bsec_config_iaq in BME680_BSEC.ino )
|
// Should be powered by 3.3v and sampled every 3sec or 300s (Or you should adapt bsec_config_iaq in BME680_BSEC.ino )
|
||||||
#define CONFIG_BME680_BSEC_ENABLE
|
//#define CONFIG_BME680_BSEC_ENABLE
|
||||||
#define CONFIG_BME680_BSEC_I2C_ADDR 0x77
|
#define CONFIG_BME680_BSEC_I2C_ADDR 0x77
|
||||||
|
|
||||||
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
|
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
|
||||||
@ -44,6 +44,8 @@
|
|||||||
// Long press on this button will put device in setup mode at runtime
|
// Long press on this button will put device in setup mode at runtime
|
||||||
#define CONFIG_SETUP_BUTTON 0
|
#define CONFIG_SETUP_BUTTON 0
|
||||||
|
|
||||||
|
// Teleinfo https://github.com/hallard/LibTeleinfo/
|
||||||
|
#define CONFIG_ENABLE_TELEINFO
|
||||||
|
|
||||||
/* DEFAULT VALUE ALSO DEFINED IN CONFIG.H */
|
/* DEFAULT VALUE ALSO DEFINED IN CONFIG.H */
|
||||||
//If this GPIO is LOW at boot, device will enter setup mode
|
//If this GPIO is LOW at boot, device will enter setup mode
|
||||||
@ -53,7 +55,7 @@
|
|||||||
//#define CONFIG_WEB_DELAY_MS 100
|
//#define CONFIG_WEB_DELAY_MS 100
|
||||||
|
|
||||||
// Get sensors value every X ms
|
// Get sensors value every X ms
|
||||||
#define CONFIG_SAMPLING_PERIODE_MS 3000
|
#define CONFIG_SAMPLING_PERIODE_MS 30000
|
||||||
|
|
||||||
// Name of the SSID when in AP mode for configuration
|
// Name of the SSID when in AP mode for configuration
|
||||||
#define CONFIG_SSID_NAME "ESPConfiguratorBureau"
|
#define CONFIG_SSID_NAME "ESPConfiguratorBureau"
|
||||||
|
@ -2,13 +2,15 @@
|
|||||||
//#define CONFIG_SKETCH_DEBUG
|
//#define CONFIG_SKETCH_DEBUG
|
||||||
|
|
||||||
// Set where debug messages will be printed.
|
// Set where debug messages will be printed.
|
||||||
#define DEBUG_PRINTER Serial
|
#ifndef DEBUG_PRINTER_WIFICONTROLSENSOR
|
||||||
|
#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial
|
||||||
|
#endif
|
||||||
|
|
||||||
#ifdef CONFIG_SKETCH_DEBUG
|
#ifdef CONFIG_SKETCH_DEBUG
|
||||||
#define SKETCH_DEBUG_INIT(speed){ DEBUG_PRINTER.begin(speed); }
|
#define SKETCH_DEBUG_INIT(speed){ DEBUG_PRINTER_WIFICONTROLSENSOR.begin(speed); }
|
||||||
#define SKETCH_DEBUG_PRINT(...) { DEBUG_PRINTER.print(__VA_ARGS__); }
|
#define SKETCH_DEBUG_PRINT(...) { DEBUG_PRINTER_WIFICONTROLSENSOR.print(__VA_ARGS__); }
|
||||||
#define SKETCH_DEBUG_PRINTF(...) { DEBUG_PRINTER.printf(__VA_ARGS__); }
|
#define SKETCH_DEBUG_PRINTF(...) { DEBUG_PRINTER_WIFICONTROLSENSOR.printf(__VA_ARGS__); }
|
||||||
#define SKETCH_DEBUG_PRINTLN(...) { DEBUG_PRINTER.println(__VA_ARGS__); }
|
#define SKETCH_DEBUG_PRINTLN(...) { DEBUG_PRINTER_WIFICONTROLSENSOR.println(__VA_ARGS__); }
|
||||||
#else
|
#else
|
||||||
#define SKETCH_DEBUG_INIT(speed)
|
#define SKETCH_DEBUG_INIT(speed)
|
||||||
#define SKETCH_DEBUG_PRINT(...) {}
|
#define SKETCH_DEBUG_PRINT(...) {}
|
||||||
|
Loading…
Reference in New Issue
Block a user