Fix teleinfo configuration

WifiControlSensor/Teleinfo.h

@@ -4,18 +4,18 @@
 #ifdef CONFIG_ENABLE_TELEINFO
 #include <LibTeleinfo.h>
 int TeleinfoSetup();
-//int TeleinfoProcess();
 int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo);
+int TeleinfoProcess(float &iinst, float &papp, float &base);
 #else
-typedef struct _ValueList {
-} ValueList;
 int TeleinfoSetup() {
   SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time");
   return -1;
 };
 
-//int TeleinfoProcess(){
-int TeleinfoProcess(std::vector<struct mqttInfo> &){
+inline int TeleinfoProcess(std::vector<struct mqttInfo> &){
+    return 0;
+};
+int TeleinfoProcess(float &iinst, float &papp, float &base){
     return 0;
 };
 #endif

WifiControlSensor/Teleinfo.ino

@@ -1,19 +1,14 @@
 #ifdef CONFIG_ENABLE_TELEINFO
 #include "Teleinfo.h"
 #include <LibTeleinfo.h>
-
+#define TELESerial Serial
 TInfo tinfo;
-void onNewFrame(ValueList *me)
-{
-  SKETCH_DEBUG_PRINTLN("New Frame available");
-}
 
 int TeleinfoSetup()
 {
-  Serial.begin(1200, SERIAL_7E1);
+  TELESerial.begin(1200, SERIAL_7E1);
 
   tinfo.init();
-  tinfo.attachNewFrame(onNewFrame);
 
   return 0;
 }
@@ -22,11 +17,10 @@ int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
 {
   int c;
 
-  while ((c = Serial.read()) >= 0) {
+  while ((c = TELESerial.read()) >= 0) {
     tinfo.process(c);
   }
   ValueList *me = tinfo.getList();
-  //std::vector<struct mqttInfo> batchInfo;
   if (me)
     me = me->next;
   while (me) {
@@ -44,8 +38,32 @@ int TeleinfoProcess(std::vector<struct mqttInfo> &batchInfo)
     }
     me = me->next;
   }
-  //if (mode == BOOTMODE_NORMAL)
-  //  MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
+
+  return 0;
+}
+
+int TeleinfoProcess(float &iinst, float &papp, float &base )
+{
+  int c;
+
+  while ((c = TELESerial.read()) >= 0) {
+    tinfo.process(c);
+  }
+  ValueList *me = tinfo.getList();
+  if (me)
+    me = me->next;
+  while (me) {
+    if (strcmp(me->name, "IINST") == 0) {
+      iinst = atof(me->value);
+    }
+    if (strcmp(me->name, "PAPP") == 0) {
+      papp = atof(me->value);
+    }
+    if (strcmp(me->name, "BASE") == 0) {
+      base = atof(me->value);
+    }
+    me = me->next;
+  }
 
   return 0;
 }

WifiControlSensor/WifiControlSensor.ino

@@ -219,7 +219,8 @@ void OTASetup() {
 #endif
 }
 
-void setup() {
+void setup()
+{
 #ifdef CONFIG_SETUP_BUTTON
   new HIB(CONFIG_SETUP_BUTTON, HIGH, NULL, NULL, onLongButtonPressed);
 #endif
@@ -230,16 +231,16 @@ void setup() {
   SKETCH_DEBUG_PRINTLN();
 
   // Get GPIO 3 Status
-//#if CONFIG_SERIAL_SHOULD_SWAP
-//  SKETCH_DEBUG_PRINTLN("SWAP UART");
-//  Serial.swap(); //Switch Serial on GPIO 13 & 15
-//#endif
+#if CONFIG_SERIAL_SHOULD_SWAP
+  SKETCH_DEBUG_PRINTLN("SWAP UART");
+  Serial.swap(); // Switch Serial on GPIO 13 & 15
+#endif
   pinMode(CONFIG_SETUP_GPIO, INPUT_PULLUP);
   int txStatus = digitalRead(CONFIG_SETUP_GPIO);
-//#if !defined(CONFIG_ENABLE_EXTRA_GPIO) && CONFIG_SERIAL_SHOULD_SWAP
-//  Serial.swap(); // Switch back on GPIO 1 & 3
-//  SKETCH_DEBUG_PRINTLN("SWAP UART");
-//#endif
+#if !defined(CONFIG_ENABLE_EXTRA_GPIO) && CONFIG_SERIAL_SHOULD_SWAP
+  Serial.swap(); // Switch back on GPIO 1 & 3
+  SKETCH_DEBUG_PRINTLN("SWAP UART");
+#endif
 
   EEPROM.begin(CONFIG_EEPROM_SIZE);
   EepromReadConfig(conf);
@@ -363,11 +364,10 @@ void loop() {
         batchInfo.push_back({bme680BSECIaq, BME680_IAQ_FEED_FORMAT, 0, 0});
         batchInfo.push_back({bme680BSECIaqAcc, BME680_IAQ_ACC_FEED_FORMAT, 0, 0});
       }
-    TeleinfoProcess(batchInfo);
+      TeleinfoProcess(batchInfo);
       if (mode == BOOTMODE_NORMAL)
         MqttBatchPublish(batchInfo, conf.mqttUser, conf.host);
       nbCycle = 0;
     }
-
   }
 }

WifiControlSensor/config.h

@@ -39,11 +39,6 @@
 #define CONFIG_DHT_PIN 0
 #endif
 
-#if defined(CONFIG_ENABLE_TELEINFO)
-#warning "TELEINFO is using SERIAL for communication. Debug will be on Serial1 (D4)"
-#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial1
-#endif
-
 #ifndef CONFIG_DRY_POWER_PIN
 #define CONFIG_DRY_POWER_PIN -1
 #endif
@@ -69,7 +64,7 @@
 #endif
 
 #ifndef CONFIG_SETUP_GPIO
-#define CONFIG_SETUP_GPIO 3
+#define CONFIG_SETUP_GPIO 14
 #endif
 
 #ifndef CONFIG_DHT_TYPE
@@ -79,3 +74,14 @@
 #if CONFIG_SETUP_GPIO == 3 || CONFIG_SETUP_GPIO == 1
 #define CONFIG_SERIAL_SHOULD_SWAP
 #endif
+
+#if defined(CONFIG_ENABLE_TELEINFO)
+#warning "TELEINFO is using SERIAL for communication. Debug will be on Serial1 (D4)"
+#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial1
+#if defined(CONFIG_SERIAL_SHOULD_SWAP)
+#error "When enabling TELEINFO, SERIAL_SHOULD_SWAP cannot be enabled (SETUP_GPIO == 1 or 3)"
+#endif
+#if defined(CONFIG_ENABLE_EXTRA_GPIO)
+#error "When enabling TELEINFO, ENABLE_EXTRA_CPIO cannot be enabled"
+#endif
+#endif

WifiControlSensor/config_device.h

@@ -15,7 +15,7 @@
 // Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
 // It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
 // Should be powered by 3.3v and sampled every 3sec or 300s (Or you should adapt bsec_config_iaq in BME680_BSEC.ino )
-#define CONFIG_BME680_BSEC_ENABLE
+//#define CONFIG_BME680_BSEC_ENABLE
 #define CONFIG_BME680_BSEC_I2C_ADDR 0x77
 
 // Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins