Domotique/WiFiAccessPointConfigurator/EEPROM.ino

76 lines
1.6 KiB
Arduino
Raw Permalink Normal View History

2016-03-10 23:36:09 +01:00
/* EEPROM LAYOUT
"BOOTMODE;SSID;PASSWORD;HOSTNAME;"
BOOTMODE could be 0 for Setup, 1 for normal use, 2 for OTA
Setup mode is trigger by setting GPIO3 to ground or at first boot
*/
int saveConfig(int bootMode, String ssid, String password, String host ) {
String eeprom;
eeprom = String(bootMode) + ";" + ssid + ";" + password + ";" + host + ";";
if (eeprom.length() > EEPROM_SIZE )
return -EMSGSIZE;
Serial.println("Saving " + eeprom);
for (int i = 0; i < eeprom.length() && i < EEPROM_SIZE; i++) {
EEPROM.write(i, eeprom.charAt(i));
}
EEPROM.commit();
delay(100);
return 0;
}
int saveBootMode(int bootMode){
EEPROM.write(0,String(bootMode).charAt(0));
EEPROM.commit();
delay(100);
return 0;
}
void readEEPROM(int &bootMode, char **ssid, char **password, char **host) {
int i = 2;
int boot = EEPROM.read(0);
if (boot == '1') {
bootMode = BOOTMODE_NORMAL;
} else if (boot == '2') {
bootMode = BOOTMODE_OTA;
} else {
//Do not need to parse EEPROM when not configured
bootMode = BOOTMODE_SETUP;
return;
}
//Read SSID
*ssid = &eeprom[2];
do {
eeprom[i] = EEPROM.read(i);
i++;
} while (i < EEPROM_SIZE && eeprom[i - 1] != ';');
eeprom[i - 1] = '\0';
//Read password
*password = &eeprom[i];
do {
eeprom[i] = EEPROM.read(i);
i++;
} while (i < EEPROM_SIZE && eeprom[i - 1] != ';');
eeprom[i - 1] = '\0';
//Read HostName
*host = &eeprom[i];
do {
eeprom[i] = EEPROM.read(i);
i++;
} while (i < EEPROM_SIZE && eeprom[i - 1] != ';');
eeprom[i - 1] = '\0';
}