142 lines
4.8 KiB
C++
142 lines
4.8 KiB
C++
/***************************************************
|
|
Adafruit MQTT Library Ethernet Example
|
|
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit and open-source hardware by purchasing
|
|
products from Adafruit!
|
|
|
|
Written by Alec Moore
|
|
Derived from the code written by Limor Fried/Ladyada for Adafruit Industries.
|
|
MIT license, all text above must be included in any redistribution
|
|
****************************************************/
|
|
#include <SPI.h>
|
|
#include "Adafruit_MQTT.h"
|
|
#include "Adafruit_MQTT_Client.h"
|
|
|
|
#include <Ethernet.h>
|
|
#include <EthernetClient.h>
|
|
#include <Dns.h>
|
|
#include <Dhcp.h>
|
|
|
|
/************************* Ethernet Client Setup *****************************/
|
|
byte mac[] = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED};
|
|
|
|
//Uncomment the following, and set to a valid ip if you don't have dhcp available.
|
|
//IPAddress iotIP (192, 168, 0, 42);
|
|
//Uncomment the following, and set to your preference if you don't have automatic dns.
|
|
//IPAddress dnsIP (8, 8, 8, 8);
|
|
//If you uncommented either of the above lines, make sure to change "Ethernet.begin(mac)" to "Ethernet.begin(mac, iotIP)" or "Ethernet.begin(mac, iotIP, dnsIP)"
|
|
|
|
|
|
/************************* Adafruit.io Setup *********************************/
|
|
|
|
#define AIO_SERVER "io.adafruit.com"
|
|
#define AIO_SERVERPORT 1883
|
|
#define AIO_USERNAME "...your AIO username (see https://accounts.adafruit.com)..."
|
|
#define AIO_KEY "...your AIO key..."
|
|
|
|
|
|
/************ Global State (you don't need to change this!) ******************/
|
|
|
|
//Set up the ethernet client
|
|
EthernetClient client;
|
|
|
|
// Store the MQTT server, client ID, username, and password in flash memory.
|
|
// This is required for using the Adafruit MQTT library.
|
|
const char MQTT_SERVER[] PROGMEM = AIO_SERVER;
|
|
// Set a unique MQTT client ID using the AIO key + the date and time the sketch
|
|
// was compiled (so this should be unique across multiple devices for a user,
|
|
// alternatively you can manually set this to a GUID or other random value).
|
|
const char MQTT_CLIENTID[] PROGMEM = __TIME__ AIO_USERNAME;
|
|
const char MQTT_USERNAME[] PROGMEM = AIO_USERNAME;
|
|
const char MQTT_PASSWORD[] PROGMEM = AIO_KEY;
|
|
|
|
Adafruit_MQTT_Client mqtt(&client, MQTT_SERVER, AIO_SERVERPORT, MQTT_CLIENTID, MQTT_USERNAME, MQTT_PASSWORD);
|
|
|
|
// You don't need to change anything below this line!
|
|
#define halt(s) { Serial.println(F( s )); while(1); }
|
|
|
|
|
|
/****************************** Feeds ***************************************/
|
|
|
|
// Setup a feed called 'photocell' for publishing.
|
|
// Notice MQTT paths for AIO follow the form: <username>/feeds/<feedname>
|
|
const char PHOTOCELL_FEED[] PROGMEM = AIO_USERNAME "/feeds/photocell";
|
|
Adafruit_MQTT_Publish photocell = Adafruit_MQTT_Publish(&mqtt, PHOTOCELL_FEED);
|
|
|
|
// Setup a feed called 'onoff' for subscribing to changes.
|
|
const char ONOFF_FEED[] PROGMEM = AIO_USERNAME "/feeds/onoff";
|
|
Adafruit_MQTT_Subscribe onoffbutton = Adafruit_MQTT_Subscribe(&mqtt, ONOFF_FEED);
|
|
|
|
/*************************** Sketch Code ************************************/
|
|
|
|
void setup() {
|
|
Serial.begin(115200);
|
|
|
|
Serial.println(F("Adafruit MQTT demo"));
|
|
|
|
// Initialise the Client
|
|
Serial.print(F("\nInit the Client..."));
|
|
Ethernet.begin(mac);
|
|
delay(1000); //give the ethernet a second to initialize
|
|
|
|
|
|
mqtt.subscribe(&onoffbutton);
|
|
}
|
|
|
|
uint32_t x=0;
|
|
|
|
void loop() {
|
|
// Ensure the connection to the MQTT server is alive (this will make the first
|
|
// connection and automatically reconnect when disconnected). See the MQTT_connect
|
|
// function definition further below.
|
|
MQTT_connect();
|
|
|
|
// Try to ping the MQTT server
|
|
if (! mqtt.ping(3) ) {
|
|
// MQTT pings failed, let's reconnect by forcing a watchdog reset.
|
|
Serial.println("Ping fail! Resetting...");
|
|
delay(10000);
|
|
}
|
|
|
|
// this is our 'wait for incoming subscription packets' busy subloop
|
|
Adafruit_MQTT_Subscribe *subscription;
|
|
while ((subscription = mqtt.readSubscription(1000))) {
|
|
if (subscription == &onoffbutton) {
|
|
Serial.print(F("Got: "));
|
|
Serial.println((char *)onoffbutton.lastread);
|
|
}
|
|
}
|
|
|
|
// Now we can publish stuff!
|
|
Serial.print(F("\nSending photocell val "));
|
|
Serial.print(x);
|
|
Serial.print("...");
|
|
if (! photocell.publish(x++)) {
|
|
Serial.println(F("Failed"));
|
|
} else {
|
|
Serial.println(F("OK!"));
|
|
}
|
|
}
|
|
|
|
// Function to connect and reconnect as necessary to the MQTT server.
|
|
// Should be called in the loop function and it will take care if connecting.
|
|
void MQTT_connect() {
|
|
int8_t ret;
|
|
|
|
// Stop if already connected.
|
|
if (mqtt.connected()) {
|
|
return;
|
|
}
|
|
|
|
Serial.print("Connecting to MQTT... ");
|
|
|
|
while ((ret = mqtt.connect()) != 0) { // connect will return 0 for connected
|
|
Serial.println(mqtt.connectErrorString(ret));
|
|
Serial.println("Retrying MQTT connection in 5 seconds...");
|
|
mqtt.disconnect();
|
|
delay(5000); // wait 5 seconds
|
|
}
|
|
Serial.println("MQTT Connected!");
|
|
}
|