update for a master airlift example

This commit is contained in:
brentru 2019-04-19 16:32:14 -04:00
parent 4b328500e2
commit 4a709ffc28
4 changed files with 37 additions and 20 deletions

View File

@ -1,10 +1,12 @@
/***************************************************
Adafruit MQTT Library PyPortal Adafruit IO SSL/TLS Example
/****************************************************************
Adafruit MQTT Library, Adafruit IO SSL/TLS Example for AirLift
Must use the latest version of nina-fw from:
https://github.com/adafruit/nina-fw
Adafruit PyPortal: https://www.adafruit.com/product/4116
Works great with Adafruit AirLift ESP32 Co-Processors!
--> https://www.adafruit.com/product/4201
--> https://www.adafruit.com/product/4116
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
@ -12,16 +14,29 @@
Written by Brent Rubell for Adafruit Industries.
MIT license, all text above must be included in any redistribution
****************************************************/
*******************************************************************/
#include <WiFiNINA.h>
#include <SPI.h>
// For AirLift Breakout/Wing/Shield: Configure the following to match the ESP32 Pins!
#if !defined(SPIWIFI_SS)
// Don't change the names of these #define's! they match the variant ones
#define SPIWIFI SPI
#define SPIWIFI_SS 11 // Chip select pin
#define SPIWIFI_ACK 10 // a.k.a BUSY or READY pin
#define ESP32_RESETN 9 // Reset pin
#define ESP32_GPIO0 -1 // Not connected
#define SET_PINS 1 // Pins were set using this IFNDEF
#endif
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"
/************************* WiFi Access Point *********************************/
#define WLAN_SSID "WLAN_SSID"
#define WLAN_PASS "WLAN_PASSWORD"
#define WLAN_PASS "WIFI_PASSWORD"
int keyIndex = 0; // your network key Index number (needed only for WEP)
int status = WL_IDLE_STATUS;
@ -59,13 +74,17 @@ void setup()
; // wait for serial port to connect. Needed for native USB port only
}
// check for the WiFi module:
if (WiFi.status() == WL_NO_MODULE)
// if the AirLift's pins were defined above...
#ifdef SET_PINS
Serial.println("Setting pins...");
WiFi.setPins(SPIWIFI_SS, SPIWIFI_ACK, ESP32_RESETN, ESP32_GPIO0, &SPIWIFI);
#endif
// check for the wifi module
while (WiFi.status() == WL_NO_MODULE)
{
Serial.println("Communication with WiFi module failed!");
// don't continue
while (true)
;
delay(1000);
}
String fv = WiFi.firmwareVersion();
@ -74,17 +93,15 @@ void setup()
Serial.println("Please upgrade the firmware");
}
// attempt to connect to WiFi network:
while (status != WL_CONNECTED)
{
Serial.print("Attempting to connect to WLAN_SSID: ");
// attempt to connect to Wifi network:
Serial.print("Attempting to connect to SSID: ");
Serial.println(WLAN_SSID);
// Connect to WPA/WPA2 network. Change this line if using open or WEP network:
do
{
status = WiFi.begin(WLAN_SSID, WLAN_PASS);
// wait 10 seconds for connection:
delay(10000);
}
delay(100); // wait until connected
} while (status != WL_CONNECTED);
Serial.println("Connected to wifi");
printWiFiStatus();
}

View File

@ -1,5 +1,5 @@
name=Adafruit MQTT Library
version=1.0.0
version=1.0.1
author=Adafruit
maintainer=Adafruit <info@adafruit.com>
sentence=MQTT library that supports the FONA, ESP8266, Yun, and generic Arduino Client hardware.