108 lines
4.8 KiB
Plaintext
108 lines
4.8 KiB
Plaintext
; c.f. https://www.gnu.org/software/grub/manual/multiboot/multiboot.html#OS-image-format
|
|
; Declare constants for the multiboot header.
|
|
MBALIGN equ 1 << 0 ; align loaded modules on page boundaries
|
|
MEMINFO equ 1 << 1 ; provide memory map
|
|
FLAGS equ MBALIGN | MEMINFO ; this is the Multiboot 'flag' field
|
|
MAGIC equ 0x1BADB002 ; 'magic number' lets bootloader find the header
|
|
CHECKSUM equ -(MAGIC + FLAGS) ; checksum of above, to prove we are multiboot
|
|
|
|
; Declare a multiboot header that marks the program as a kernel. These are magic
|
|
; values that are documented in the multiboot standard. The bootloader will
|
|
; search for this signature in the first 8 KiB of the kernel file, aligned at a
|
|
; 32-bit boundary. The signature is in its own section so the header can be
|
|
; forced to be within the first 8 KiB of the kernel file.
|
|
section .multiboot
|
|
align 4
|
|
dd MAGIC
|
|
dd FLAGS
|
|
dd CHECKSUM
|
|
|
|
; The multiboot standard does not define the value of the stack pointer register
|
|
; (esp) and it is up to the kernel to provide a stack. This allocates room for a
|
|
; small stack by creating a symbol at the bottom of it, then allocating 16384
|
|
; bytes for it, and finally creating a symbol at the top. The stack grows
|
|
; downwards on x86. The stack is in its own section so it can be marked nobits,
|
|
; which means the kernel file is smaller because it does not contain an
|
|
; uninitialized stack. The stack on x86 must be 16-byte aligned according to the
|
|
; System V ABI standard and de-facto extensions. The compiler will assume the
|
|
; stack is properly aligned and failure to align the stack will result in
|
|
; undefined behavior.
|
|
section .bss
|
|
align 4096
|
|
stack_bottom:
|
|
resb 16384 ; 16 KiB
|
|
stack_top:
|
|
|
|
; The linker script specifies _start as the entry point to the kernel and the
|
|
; bootloader will jump to this position once the kernel has been loaded. It
|
|
; doesn't make sense to return from this function as the bootloader is gone.
|
|
; Declare _start as a function symbol with the given symbol size.
|
|
section .text
|
|
global _start:function (_start.end - _start)
|
|
_start:
|
|
; The bootloader has loaded us into 32-bit protected mode on a x86
|
|
; machine. Interrupts are disabled. Paging is disabled. The processor
|
|
; state is as defined in the multiboot standard. The kernel has full
|
|
; control of the CPU. The kernel can only make use of hardware features
|
|
; and any code it provides as part of itself. There's no printf
|
|
; function, unless the kernel provides its own <stdio.h> header and a
|
|
; printf implementation. There are no security restrictions, no
|
|
; safeguards, no debugging mechanisms, only what the kernel provides
|
|
; itself. It has absolute and complete power over the
|
|
; machine.
|
|
|
|
; To set up a stack, we set the esp register to point to the top of our
|
|
; stack (as it grows downwards on x86 systems). This is necessarily done
|
|
; in assembly as languages such as C cannot function without a stack.
|
|
mov esp, stack_top
|
|
mov ebp, esp
|
|
|
|
; This is a good place to initialize crucial processor state before the
|
|
; high-level kernel is entered. It's best to minimize the early
|
|
; environment where crucial features are offline. Note that the
|
|
; processor is not fully initialized yet: Features such as floating
|
|
; point instructions and instruction set extensions are not initialized
|
|
; yet. The GDT should be loaded here. Paging should be enabled here.
|
|
; C++ features such as global constructors and exceptions will require
|
|
; runtime support to work as well.
|
|
|
|
; Enter the high-level kernel. The ABI requires the stack is 16-byte
|
|
; aligned at the time of the call instruction (which afterwards pushes
|
|
; the return pointer of size 4 bytes). The stack was originally 16-byte
|
|
; aligned above and we've since pushed a multiple of 16 bytes to the
|
|
; stack since (pushed 0 bytes so far) and the alignment is thus
|
|
; preserved and the call is well defined.
|
|
; note, that if you are building on Windows, C functions may have "_" prefix in assembly: _kernel_main
|
|
|
|
; Reset EFLAGS.
|
|
push dword 0
|
|
popf
|
|
|
|
; Push the pointer to the Multiboot information structure.
|
|
push ebx
|
|
; Push the magic value.
|
|
push eax
|
|
|
|
extern kmain
|
|
call kmain
|
|
|
|
; If the system has nothing more to do, put the computer into an
|
|
; infinite loop. To do that:
|
|
; 1) Disable interrupts with cli (clear interrupt enable in eflags).
|
|
; They are already disabled by the bootloader, so this is not needed.
|
|
; Mind that you might later enable interrupts and return from
|
|
; kernel_main (which is sort of nonsensical to do).
|
|
; 2) Wait for the next interrupt to arrive with hlt (halt instruction).
|
|
; Since they are disabled, this will lock up the computer.
|
|
; 3) Jump to the hlt instruction if it ever wakes up due to a
|
|
; non-maskable interrupt occurring or due to system management mode.
|
|
cli
|
|
.hang: hlt
|
|
jmp .hang
|
|
.end:
|
|
|
|
global _stack_bottom
|
|
_stack_bottom: dd stack_bottom
|
|
global _stack_top
|
|
_stack_top: dd stack_top
|