Fix some naming convention

core/irq_handler.c

@@ -25,5 +25,5 @@ __attribute__((interrupt)) void timer_handler(struct interrupt_frame *frame)
 __attribute__((interrupt)) void serial_handler(struct interrupt_frame *frame)
 {
         EOIIrq(IRQ_COM1);
-        serial_do_irq(frame);
+        serialDoIrq(frame);
 }

core/main.c

@@ -10,6 +10,9 @@
 #include "pit.h"
 #include "serial.h"
 #include "stdarg.h"
+#ifdef RUN_TEST
+#include "test.h"
+#endif
 #include "vga.h"
 
 #define CHECK_FLAG(flags, bit) ((flags) & (1 << (bit)))
@@ -23,12 +26,13 @@ void cpuid(int code, uint32_t *a, uint32_t *d)
 void kmain(unsigned long magic, unsigned long addr)
 {
     unsigned long upper_mem = 0;
-    initVGA(BLACK, GREEN);
-    printf("Setting up IDT\n");
+    VGASetup(BLACK, GREEN);
+
+    printf("Setting up Interruptions\n");
     gdtSetup();
     idtSetup();
     irqSetup();
-    initPit(100);
+    pitSetup(100);
 
     if (magic == MULTIBOOT_BOOTLOADER_MAGIC) { // Get loaded by Grub wuth mutliboot version 1
         multiboot_info_t *mbi = (multiboot_info_t *)addr;
@@ -53,16 +57,23 @@ void kmain(unsigned long magic, unsigned long addr)
         printf("Cannot get upper phy mem bound. Using default value 32MB\n");
         upper_mem = 32 * 1024;
     }
-    memInit(upper_mem);
+
+    printf("Setting up Pagination\n");
+    memSetup(upper_mem);
 
     printf("Setting up IRQ handlers\n");
     irqSetRoutine(IRQ_KEYBOARD, keyboard_handler);
+
     printf("Enabling HW interrupts\n");
     exceptionSetRoutine(EXCEPTION_DOUBLE_FAULT, print_handler);
     // Enabling the HW interrupts
     asm volatile("sti\n");
-    printf("Init Serial\n");
-    initSerial(115200);
+
+    printf("Setting up Serial link (115200)\n");
+    serialSetup(115200);
+#ifdef RUN_TEST
+    run_test();
+#endif
 
     int count = 0;
     while (1) {

core/mem.c

@@ -9,7 +9,7 @@ static unsigned long bottom_mem;
 static unsigned long top_mem;
 
 
-int memInit(unsigned long upper_mem)
+int memSetup(unsigned long upper_mem)
 {
 	printf("Free Mem going from %d to %d\n", &__ld_kernel_end, upper_mem * 1024);
 	unsigned long memdesc_end =

core/mem.h

@@ -16,6 +16,6 @@ struct mem_desc{
 };
 
 
-int memInit(unsigned long upper_mem);
+int memSetup(unsigned long upper_mem);
 unsigned long allocPage(void);
 int unrefPage(unsigned long addr);

drivers/pit.c

@@ -2,7 +2,7 @@
 #include "io.h"
 #include "irq.h"
 
-int initPit(unsigned int freq)
+int pitSetup(unsigned int freq)
 {
 	unsigned int divisor = PIT_FREQ / freq;
 	if (divisor > 65535)

drivers/pit.h

@@ -12,5 +12,5 @@
 // 5-4: access mode. 0 -> latch count; 1 -> low value only; 2 -> high value only;
 // 3 -> low then high 3-1: mode. See https://wiki.osdev.org/PIT
 
-int initPit(unsigned int freq);
+int pitSetup(unsigned int freq);
 

drivers/serial.c

@@ -21,7 +21,7 @@
 #define UART_1_STOP_BIT 0x00
 #define UART_2_STOP_BITS 0x04
 
-void initSerial(int speed)
+void serialSetup(int speed)
 {
    unsigned short div = SERIAL_MAX_SPEED / speed;
    outb(PORT + 1, 0x00);       // Disable all interrupts
@@ -40,7 +40,7 @@ int isTransmitEmpty()
    return (inb(PORT + 5) & 0x20);
 }
 
-void writeSerial(char a)
+void serialWrite(char a)
 {
    while (isTransmitEmpty() == 0)
       ;
@@ -48,9 +48,9 @@ void writeSerial(char a)
    outb(PORT, a);
 }
 
-void serial_do_irq(struct interrupt_frame *level)
+void serialDoIrq(struct interrupt_frame *level)
 {
    (void)level;
    char c = inb(PORT);
-   writeSerial(c);
+   serialWrite(c);
 }

drivers/serial.h

@@ -1,6 +1,6 @@
 #pragma once
 #include "irq.h"
 
-void initSerial(int speed);
-void writeSerial(char a);
-void serial_do_irq(struct interrupt_frame *frame);
+void serialSetup(int speed);
+void serialWrite(char a);
+void serialDoIrq(struct interrupt_frame *frame);

drivers/vga.c

@@ -6,7 +6,7 @@ static uint vgaBgColor;
 static uint vgaColor;
 static int line, col;
 
-int initVGA(uint bgColor, uint color)
+int VGASetup(uint bgColor, uint color)
 {
 	vgaBgColor = bgColor;
 	vgaColor   = color;

drivers/vga.h

@@ -18,7 +18,7 @@
 
 void vprintf(const char *format, va_list ap);
 void printf(const char *format, ...);
-int initVGA(uint bgColor, uint color);
+int VGASetup(uint bgColor, uint color);
 void clearScreen(uint bgColor);
 void printInt(int integer);
 void printIntDetails(int integer, uint color, uint bgColor, int startX, int startY);