esp8266_deepsleep/deepSleep.ino

#include <vector>
#include <ESP8266WiFi.h>
extern "C" {
#include "user_interface.h" // Required for wifi_station_connect() to work
}

#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"

#define USE_BME680

#ifdef USE_BME680
#include <Adafruit_Sensor.h>
#include "Adafruit_BME680.h"

#define BME_SCK 13
#define BME_MISO 12
#define BME_MOSI 11
#define BME_CS 10

#define SEALEVELPRESSURE_HPA (1013.25)

Adafruit_BME680 bme; // I2C

#define BME_TEMPERATURE_FEED_FORMAT "/feeds/mathieu/portable/bme/temperature"
#define BME_HUMIDITY_FEED_FORMAT "/feeds/mathieu/portable/bme/humidity"
#define BME_VOLTAGE_FEED_FORMAT "/feeds/mathieu/portable/bme/voltage"
#define BME_PRESSURE_FEED_FORMAT "/feeds/mathieu/portable/bme/pressure"
#define BME_GAZ_FEED_FORMAT "/feeds/mathieu/portable/bme/gaz"
#endif

// if bigger than 4295, modem will wake up anyway? c.f. forceSleepBegin.
// https://www.espressif.com/sites/default/files/documentation/2c-esp8266_non_os_sdk_api_reference_en.pdf
// say no
// should stick on 64bits when mul by 1000000 -> shoudl be smaller than ~18000.10^9 ~580000year
#define SLEEP_TIME_SECOND 10*60

#ifdef USE_DHT
#include <DHT.h>
#define DHTTYPE DHT11
#define DHTPIN D3
#define DHT_POWER_PIN 13
DHT dht(DHTPIN, DHTTYPE);
#define TEMPERATURE_FEED_FORMAT "/feeds/mathieu/portable/temperature"
#define HUMIDITY_FEED_FORMAT "/feeds/mathieu/portable/humidity"
#define VOLTAGE_FEED_FORMAT "/feeds/mathieu/portable/voltage"
#endif

#define FPM_SLEEP_MAX_TIME 0xFFFFFFF // Could be replace by ESP.deepSleepMax() -> https://thingpulse.com/max-deep-sleep-for-esp8266/

#define MQTT_SERVER "192.168.0.250"
#define MQTT_USERNAME "XXXXXX"
#define MQTT_PASSWD "XXXXX"
#define MQTT_PORT 1883

WiFiClient client;
Adafruit_MQTT_Client *mqtt;
Adafruit_MQTT_Publish *mqtt_temp;
Adafruit_MQTT_Publish *mqtt_pressure;
Adafruit_MQTT_Publish *mqtt_voltage;

//const char *ssid     = "AndroidAP-Mathieu";
//const char *password = "bonjourwifi";
const char *ssid     = "freebox_sarah";
const char *password = "barca2grenada";

uint8_t bssid[6] = {0x14, 0x0C, 0x76, 0xB1, 0x37, 0x32};
int32_t channel = 11; //0 for Auto

ADC_MODE(ADC_VCC);
void setup()
{
  Serial.begin(115200);
  Serial.print("\nRunning\n");
#ifdef USE_DHT
  // Power on DHT11
  pinMode(DHT_POWER_PIN, OUTPUT);
  digitalWrite(DHT_POWER_PIN, HIGH);
#endif

#ifdef USE_BME680
  if (!bme.begin()) {
    Serial.println("Could not find a valid BME680 sensor, check wiring!");
    while (1);
  }

  // Set up oversampling and filter initialization
  bme.setTemperatureOversampling(BME680_OS_8X);
  bme.setHumidityOversampling(BME680_OS_2X);
  bme.setPressureOversampling(BME680_OS_4X);
  bme.setIIRFilterSize(BME680_FILTER_SIZE_3);
  bme.setGasHeater(320, 150); // 320*C for 150 ms
#endif
}

// ESP.deepSleep( X, WAKE_RF_DISABLED ); disable the radio interface and it can't be
// activated after
// So use WAKE_RF_DEFAULT and play with wifi stat manually
void WiFiOn() // vs WiFi.forceSleepWake();
{

  wifi_fpm_do_wakeup();
  wifi_fpm_close();

  Serial.println("Reconnecting");
  wifi_set_opmode(STATION_MODE);
  wifi_station_connect();
}

int WiFiOff() // vs WiFi.forceSleepBegin();
{

  // Serial.println("diconnecting client and wifi");
  //client.disconnect();
  wifi_station_disconnect();
  wifi_set_opmode(NULL_MODE);
  wifi_set_sleep_type(MODEM_SLEEP_T);
  wifi_fpm_open();
  return wifi_fpm_do_sleep(FPM_SLEEP_MAX_TIME);
}

struct mqttInfo {
  float value;
  char *topic;
};

int mqttConnect(std::vector<struct mqttInfo> tab) {
  mqtt    = new Adafruit_MQTT_Client(&client, MQTT_SERVER, MQTT_PORT,
                                     MQTT_USERNAME, MQTT_USERNAME, MQTT_PASSWD);
  uint8_t retries = 3;
  Serial.println("Connecting to mqtt");
  while ((mqtt->connect()) != 0) { // connect will return 0 for connected
    mqtt->disconnect();
    delay(100); // wait
    retries--;
    if (retries == 0) {
      Serial.println("Cannot connect to mqtt");
      return -1;
    }
  }
  Serial.println("Sending mqtt info");
  for (auto info : tab) {
    Serial.print("publishing ");
    Serial.print(info.value);
    Serial.print(" for ");
    Serial.println(info.topic);
    Adafruit_MQTT_Publish client(mqtt, info.topic, 0);
    if (!client.publish(info.value))
      Serial.println("Fail :(");
  }
  //Do we need this ? Wifi will be cut anyway
  mqtt->disconnect();
  return 0;
}

int doBMEMeasure() {
#ifdef USE_BME680
  if (! bme.performReading()) {
    Serial.println("Failed to perform reading :(");
    return -1;
  }
  Serial.print("Temperature = ");
  Serial.print(bme.temperature);
  Serial.println(" *C");

  Serial.print("Pressure = ");
  Serial.print(bme.pressure / 100.0);
  Serial.println(" hPa");

  Serial.print("Humidity = ");
  Serial.print(bme.humidity);
  Serial.println(" %");

  Serial.print("Gas = ");
  Serial.print(bme.gas_resistance / 1000.0);
  Serial.println(" KOhms");

  std::vector<struct mqttInfo> bmeInfo;
  bmeInfo.push_back({bme.humidity, BME_HUMIDITY_FEED_FORMAT});
  bmeInfo.push_back({bme.temperature, BME_TEMPERATURE_FEED_FORMAT});
  bmeInfo.push_back({bme.pressure / 100.0, BME_PRESSURE_FEED_FORMAT});
  bmeInfo.push_back({bme.gas_resistance / 1000.0, BME_GAZ_FEED_FORMAT});
  bmeInfo.push_back({(float)ESP.getVcc(), BME_VOLTAGE_FEED_FORMAT});

  wifiConnect();
  mqttConnect(bmeInfo);
  if (WiFiOff()) {
    //if (WiFi.forceSleepBegin(0)) {
    Serial.println("Fail to set sleep mode");
  }
#else
  return 0;
#endif
}

int wifiConnect() {
  WiFiOn();
  //WiFi.forceSleepWake();
  IPAddress ip(192, 168, 0, 251);
  IPAddress gateway(192, 168, 0, 254);
  IPAddress subnet(255, 255, 255, 0);
  WiFi.config(ip, gateway, subnet);
  WiFi.begin(ssid, password, channel, bssid);

  int retry = 10;
  while (WiFi.status() != WL_CONNECTED) {
    delay(100);
    Serial.print(".");
    if (retry < 0)
      continue;
    retry --;
  }


  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
  return 0;
}

int doDHTMeasure()
{
#ifdef USE_DHT
  // Wait for DHT to be ready
  delay(2000);
  float h = dht.readHumidity();
  // Read temperature as Celsius (the default)
  float t = dht.readTemperature();

  // Check if any reads failed and exit early (to try again).
  if (isnan(h) || isnan(t)) {
    Serial.println("Failed to read from DHT sensor!");
    return -1;
  }

  // Compute heat index in Celsius (isFahreheit = false)
  float hic = dht.computeHeatIndex(t, h, false);

  Serial.print("Humidity: ");
  Serial.print(h);
  Serial.print(" %\t");
  Serial.print("Temperature: ");
  Serial.print(t);
  Serial.print(" *C ");
  Serial.print("Heat index: ");
  Serial.print(hic);
  Serial.print(" *C ");

  std::vector<struct mqttInfo> dhtInfo;
  dhtInfo.push_back({h, HUMIDITY_FEED_FORMAT});
  dhtInfo.push_back({t, TEMPERATURE_FEED_FORMAT});
  dhtInfo.push_back({(float)ESP.getVcc(), VOLTAGE_FEED_FORMAT});

  wifiConnect();
  mqttConnect(dhtInfo);
  if (WiFiOff()) {
    //if (WiFi.forceSleepBegin(0)) {
    Serial.println("Fail to set sleep mode");
  }
  return 0;
#else
  return 0;
#endif
}


void loop()
{
  doDHTMeasure();
  doBMEMeasure();
  ESP.deepSleep(SLEEP_TIME_SECOND * 1000000, WAKE_RF_DEFAULT);
}