vim.cmd([[ set runtimepath^=~/.vim runtimepath+=~/.vim/after let &packpath = &runtimepath source ~/.vimrc ]]) -- Set as the leader key -- See `:help mapleader` -- NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used) -- vim.g.mapleader = ' ' --vim.g.maplocalleader = ' ' -- Set to true if you have a Nerd Font installed and selected in the terminal vim.g.have_nerd_font = true vim.opt.clipboard = "unnamedplus" -- Set highlight on search, but clear on pressing in normal mode vim.opt.hlsearch = true vim.keymap.set("n", "", "nohlsearch") -- Diagnostic keymaps vim.keymap.set("n", "[d", vim.diagnostic.goto_prev, { desc = "Go to previous [D]iagnostic message" }) vim.keymap.set("n", "]d", vim.diagnostic.goto_next, { desc = "Go to next [D]iagnostic message" }) vim.keymap.set("n", "e", vim.diagnostic.open_float, { desc = "Show diagnostic [E]rror messages" }) vim.keymap.set("n", "q", vim.diagnostic.setloclist, { desc = "Open diagnostic [Q]uickfix list" }) local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim" if not (vim.uv or vim.loop).fs_stat(lazypath) then vim.fn.system({ "git", "clone", "--filter=blob:none", "https://github.com/folke/lazy.nvim.git", "--branch=stable", -- latest stable release lazypath, }) end vim.opt.runtimepath:prepend(lazypath) require("lazy").setup({ { "folke/tokyonight.nvim", lazy = false, priority = 1000, opts = {}, }, "tpope/vim-sleuth", -- Detect tabstop and shiftwidth automatically { -- Useful plugin to show you pending keybinds. "folke/which-key.nvim", event = "VimEnter", -- Sets the loading event to 'VimEnter' config = function() -- This is the function that runs, AFTER loading require("which-key").setup() -- Document existing key chains require("which-key").register({ ["c"] = { name = "[C]ode", _ = "which_key_ignore" }, ["d"] = { name = "[D]ocument", _ = "which_key_ignore" }, ["r"] = { name = "[R]ename", _ = "which_key_ignore" }, ["s"] = { name = "[S]earch", _ = "which_key_ignore" }, ["w"] = { name = "[W]orkspace", _ = "which_key_ignore" }, ["t"] = { name = "[T]oggle", _ = "which_key_ignore" }, ["h"] = { name = "Git [H]unk", _ = "which_key_ignore" }, }) -- visual mode require("which-key").register({ ["h"] = { "Git [H]unk" }, }, { mode = "v" }) end, }, { "rebelot/kanagawa.nvim" }, "tpope/vim-fugitive", "tpope/vim-rhubarb", "tpope/vim-commentary", "mhinz/vim-signify", "mbbill/echofunc", "preservim/nerdtree", "majutsushi/tagbar", "junegunn/fzf", "junegunn/fzf.vim", "vimwiki/vimwiki", "tmhedberg/matchit", "tpope/vim-surround", "rhysd/vim-grammarous", "liuchengxu/vista.vim", "https://git.mathux.org/mathieu/taglist.git", { "nvim-treesitter/nvim-treesitter", build = ":TSUpdate", config = function() local configs = require("nvim-treesitter.configs") configs.setup({ ensure_installed = { "c", "cpp", "lua", "vim", "vimdoc", "bash", "cmake", "diff", "dockerfile", "doxygen", "git_config", "gitcommit", "make", "nasm", }, sync_install = false, highlight = { enable = true }, indent = { enable = true }, }) end, }, { "nvim-telescope/telescope.nvim", tag = "0.1.6", -- or , branch = '0.1.x', dependencies = { "nvim-lua/plenary.nvim" }, }, { -- Fuzzy Finder (files, lsp, etc) "nvim-telescope/telescope.nvim", event = "VimEnter", branch = "0.1.x", dependencies = { "nvim-lua/plenary.nvim", { -- If encountering errors, see telescope-fzf-native README for installation instructions "nvim-telescope/telescope-fzf-native.nvim", -- `build` is used to run some command when the plugin is installed/updated. -- This is only run then, not every time Neovim starts up. build = "make", -- `cond` is a condition used to determine whether this plugin should be -- installed and loaded. cond = function() return vim.fn.executable("make") == 1 end, }, { "nvim-telescope/telescope-ui-select.nvim" }, -- Useful for getting pretty icons, but requires a Nerd Font. { "nvim-tree/nvim-web-devicons", enabled = vim.g.have_nerd_font }, }, config = function() -- Telescope is a fuzzy finder that comes with a lot of different things that -- it can fuzzy find! It's more than just a "file finder", it can search -- many different aspects of Neovim, your workspace, LSP, and more! -- -- The easiest way to use Telescope, is to start by doing something like: -- :Telescope help_tags -- -- After running this command, a window will open up and you're able to -- type in the prompt window. You'll see a list of `help_tags` options and -- a corresponding preview of the help. -- -- Two important keymaps to use while in Telescope are: -- - Insert mode: -- - Normal mode: ? -- -- This opens a window that shows you all of the keymaps for the current -- Telescope picker. This is really useful to discover what Telescope can -- do as well as how to actually do it! -- [[ Configure Telescope ]] -- See `:help telescope` and `:help telescope.setup()` require("telescope").setup({ -- You can put your default mappings / updates / etc. in here -- All the info you're looking for is in `:help telescope.setup()` -- -- defaults = { -- mappings = { -- i = { [''] = 'to_fuzzy_refine' }, -- }, -- }, -- pickers = {} extensions = { ["ui-select"] = { require("telescope.themes").get_dropdown(), }, }, }) -- Enable Telescope extensions if they are installed pcall(require("telescope").load_extension, "fzf") pcall(require("telescope").load_extension, "ui-select") -- See `:help telescope.builtin` local builtin = require("telescope.builtin") vim.keymap.set("n", "sh", builtin.help_tags, { desc = "[S]earch [H]elp" }) vim.keymap.set("n", "sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" }) vim.keymap.set("n", "sf", builtin.find_files, { desc = "[S]earch [F]iles" }) vim.keymap.set("n", "ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" }) vim.keymap.set("n", "sw", builtin.grep_string, { desc = "[S]earch current [W]ord" }) vim.keymap.set("n", "sg", builtin.live_grep, { desc = "[S]earch by [G]rep" }) vim.keymap.set("n", "sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" }) vim.keymap.set("n", "sr", builtin.resume, { desc = "[S]earch [R]esume" }) vim.keymap.set("n", "s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) vim.keymap.set("n", "", builtin.buffers, { desc = "[ ] Find existing buffers" }) -- Slightly advanced example of overriding default behavior and theme vim.keymap.set("n", "/", function() -- You can pass additional configuration to Telescope to change the theme, layout, etc. builtin.current_buffer_fuzzy_find(require("telescope.themes").get_dropdown({ winblend = 10, previewer = false, })) end, { desc = "[/] Fuzzily search in current buffer" }) -- It's also possible to pass additional configuration options. -- See `:help telescope.builtin.live_grep()` for information about particular keys vim.keymap.set("n", "s/", function() builtin.live_grep({ grep_open_files = true, prompt_title = "Live Grep in Open Files", }) end, { desc = "[S]earch [/] in Open Files" }) -- Shortcut for searching your Neovim configuration files vim.keymap.set("n", "sn", function() builtin.find_files({ cwd = vim.fn.stdpath("config") }) end, { desc = "[S]earch [N]eovim files" }) end, }, { "David-Kunz/gen.nvim", opts = { model = "llama3", -- The default model to use. host = "localhost", -- The host running the Ollama service. port = "11434", -- The port on which the Ollama service is listening. quit_map = "q", -- set keymap for close the response window retry_map = "", -- set keymap to re-send the current prompt init = function(options) pcall(io.popen, "ollama serve > /dev/null 2>&1 &") end, -- Function to initialize Ollama command = function(options) local body = { model = options.model, stream = true } return "curl --silent --no-buffer -X POST http://" .. options.host .. ":" .. options.port .. "/api/chat -d $body" end, -- The command for the Ollama service. You can use placeholders $prompt, $model and $body (shellescaped). -- This can also be a command string. -- The executed command must return a JSON object with { response, context } -- (context property is optional). -- list_models = '', -- Retrieves a list of model names display_mode = "float", -- The display mode. Can be "float" or "split". show_prompt = false, -- Shows the prompt submitted to Ollama. show_model = false, -- Displays which model you are using at the beginning of your chat session. no_auto_close = false, -- Never closes the window automatically. debug = false, -- Prints errors and the command which is run. }, }, { -- LSP Configuration & Plugins "neovim/nvim-lspconfig", dependencies = { -- Automatically install LSPs and related tools to stdpath for Neovim { "williamboman/mason.nvim", config = true }, -- NOTE: Must be loaded before dependants "williamboman/mason-lspconfig.nvim", "WhoIsSethDaniel/mason-tool-installer.nvim", -- Useful status updates for LSP. -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})` { "j-hui/fidget.nvim", opts = {} }, -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins -- used for completion, annotations and signatures of Neovim apis { "folke/neodev.nvim", opts = {} }, }, config = function() -- Brief aside: **What is LSP?** -- -- LSP is an initialism you've probably heard, but might not understand what it is. -- -- LSP stands for Language Server Protocol. It's a protocol that helps editors -- and language tooling communicate in a standardized fashion. -- -- In general, you have a "server" which is some tool built to understand a particular -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone -- processes that communicate with some "client" - in this case, Neovim! -- -- LSP provides Neovim with features like: -- - Go to definition -- - Find references -- - Autocompletion -- - Symbol Search -- - and more! -- -- Thus, Language Servers are external tools that must be installed separately from -- Neovim. This is where `mason` and related plugins come into play. -- -- If you're wondering about lsp vs treesitter, you can check out the wonderfully -- and elegantly composed help section, `:help lsp-vs-treesitter` -- This function gets run when an LSP attaches to a particular buffer. -- That is to say, every time a new file is opened that is associated with -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this -- function will be executed to configure the current buffer vim.api.nvim_create_autocmd("LspAttach", { group = vim.api.nvim_create_augroup("kickstart-lsp-attach", { clear = true }), callback = function(event) -- NOTE: Remember that Lua is a real programming language, and as such it is possible -- to define small helper and utility functions so you don't have to repeat yourself. -- -- In this case, we create a function that lets us more easily define mappings specific -- for LSP related items. It sets the mode, buffer and description for us each time. local map = function(keys, func, desc) vim.keymap.set("n", keys, func, { buffer = event.buf, desc = "LSP: " .. desc }) end -- Jump to the definition of the word under your cursor. -- This is where a variable was first declared, or where a function is defined, etc. -- To jump back, press . map("gd", require("telescope.builtin").lsp_definitions, "[G]oto [D]efinition") -- Find references for the word under your cursor. map("gr", require("telescope.builtin").lsp_references, "[G]oto [R]eferences") -- Jump to the implementation of the word under your cursor. -- Useful when your language has ways of declaring types without an actual implementation. map("gI", require("telescope.builtin").lsp_implementations, "[G]oto [I]mplementation") -- Jump to the type of the word under your cursor. -- Useful when you're not sure what type a variable is and you want to see -- the definition of its *type*, not where it was *defined*. map("D", require("telescope.builtin").lsp_type_definitions, "Type [D]efinition") -- Fuzzy find all the symbols in your current document. -- Symbols are things like variables, functions, types, etc. map("ds", require("telescope.builtin").lsp_document_symbols, "[D]ocument [S]ymbols") -- Fuzzy find all the symbols in your current workspace. -- Similar to document symbols, except searches over your entire project. map( "ws", require("telescope.builtin").lsp_dynamic_workspace_symbols, "[W]orkspace [S]ymbols" ) -- Rename the variable under your cursor. -- Most Language Servers support renaming across files, etc. map("rn", vim.lsp.buf.rename, "[R]e[n]ame") -- Execute a code action, usually your cursor needs to be on top of an error -- or a suggestion from your LSP for this to activate. map("ca", vim.lsp.buf.code_action, "[C]ode [A]ction") -- Opens a popup that displays documentation about the word under your cursor -- See `:help K` for why this keymap. map("K", vim.lsp.buf.hover, "Hover Documentation") -- WARN: This is not Goto Definition, this is Goto Declaration. -- For example, in C this would take you to the header. map("gD", vim.lsp.buf.declaration, "[G]oto [D]eclaration") -- The following two autocommands are used to highlight references of the -- word under your cursor when your cursor rests there for a little while. -- See `:help CursorHold` for information about when this is executed -- -- When you move your cursor, the highlights will be cleared (the second autocommand). local client = vim.lsp.get_client_by_id(event.data.client_id) if client and client.server_capabilities.documentHighlightProvider then local highlight_augroup = vim.api.nvim_create_augroup("kickstart-lsp-highlight", { clear = false }) vim.api.nvim_create_autocmd({ "CursorHold", "CursorHoldI" }, { buffer = event.buf, group = highlight_augroup, callback = vim.lsp.buf.document_highlight, }) vim.api.nvim_create_autocmd({ "CursorMoved", "CursorMovedI" }, { buffer = event.buf, group = highlight_augroup, callback = vim.lsp.buf.clear_references, }) vim.api.nvim_create_autocmd("LspDetach", { group = vim.api.nvim_create_augroup("kickstart-lsp-detach", { clear = true }), callback = function(event2) vim.lsp.buf.clear_references() vim.api.nvim_clear_autocmds({ group = "kickstart-lsp-highlight", buffer = event2.buf }) end, }) end -- The following autocommand is used to enable inlay hints in your -- code, if the language server you are using supports them -- -- This may be unwanted, since they displace some of your code if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then map("th", function() vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled()) end, "[T]oggle Inlay [H]ints") end end, }) -- LSP servers and clients are able to communicate to each other what features they support. -- By default, Neovim doesn't support everything that is in the LSP specification. -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities. -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers. local capabilities = vim.lsp.protocol.make_client_capabilities() capabilities = vim.tbl_deep_extend("force", capabilities, require("cmp_nvim_lsp").default_capabilities()) -- Enable the following language servers -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. -- -- Add any additional override configuration in the following tables. Available keys are: -- - cmd (table): Override the default command used to start the server -- - filetypes (table): Override the default list of associated filetypes for the server -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features. -- - settings (table): Override the default settings passed when initializing the server. -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/ local servers = { clangd = {}, -- gopls = {}, -- pyright = {}, -- rust_analyzer = {}, -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs -- -- Some languages (like typescript) have entire language plugins that can be useful: -- https://github.com/pmizio/typescript-tools.nvim -- -- But for many setups, the LSP (`tsserver`) will work just fine -- tsserver = {}, -- lua_ls = { -- cmd = {...}, -- filetypes = { ...}, -- capabilities = {}, settings = { Lua = { completion = { callSnippet = "Replace", }, -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings -- diagnostics = { disable = { 'missing-fields' } }, }, }, }, } -- Ensure the servers and tools above are installed -- To check the current status of installed tools and/or manually install -- other tools, you can run -- :Mason -- -- You can press `g?` for help in this menu. require("mason").setup() -- You can add other tools here that you want Mason to install -- for you, so that they are available from within Neovim. local ensure_installed = vim.tbl_keys(servers or {}) vim.list_extend(ensure_installed, { "stylua", -- Used to format Lua code }) require("mason-tool-installer").setup({ ensure_installed = ensure_installed }) require("mason-lspconfig").setup({ handlers = { function(server_name) local server = servers[server_name] or {} -- This handles overriding only values explicitly passed -- by the server configuration above. Useful when disabling -- certain features of an LSP (for example, turning off formatting for tsserver) server.capabilities = vim.tbl_deep_extend("force", {}, capabilities, server.capabilities or {}) require("lspconfig")[server_name].setup(server) end, }, }) end, }, { -- Autoformat "stevearc/conform.nvim", lazy = false, keys = { { "f", function() require("conform").format({ async = true, lsp_fallback = true }) end, mode = "", desc = "[F]ormat buffer", }, }, opts = { notify_on_error = false, format_on_save = function(bufnr) -- Disable "format_on_save lsp_fallback" for languages that don't -- have a well standardized coding style. You can add additional -- languages here or re-enable it for the disabled ones. local disable_filetypes = { c = true, cpp = true } return { timeout_ms = 500, lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype], } end, formatters_by_ft = { lua = { "stylua" }, -- Conform can also run multiple formatters sequentially -- python = { "isort", "black" }, -- -- You can use a sub-list to tell conform to run *until* a formatter -- is found. -- javascript = { { "prettierd", "prettier" } }, }, }, }, { -- Autocompletion "hrsh7th/nvim-cmp", event = "InsertEnter", dependencies = { -- Snippet Engine & its associated nvim-cmp source { "L3MON4D3/LuaSnip", build = (function() -- Build Step is needed for regex support in snippets. -- This step is not supported in many windows environments. -- Remove the below condition to re-enable on windows. if vim.fn.has("win32") == 1 or vim.fn.executable("make") == 0 then return end return "make install_jsregexp" end)(), dependencies = { -- `friendly-snippets` contains a variety of premade snippets. -- See the README about individual language/framework/plugin snippets: -- https://github.com/rafamadriz/friendly-snippets -- { -- 'rafamadriz/friendly-snippets', -- config = function() -- require('luasnip.loaders.from_vscode').lazy_load() -- end, -- }, }, }, "saadparwaiz1/cmp_luasnip", -- Adds other completion capabilities. -- nvim-cmp does not ship with all sources by default. They are split -- into multiple repos for maintenance purposes. "hrsh7th/cmp-nvim-lsp", "hrsh7th/cmp-path", }, config = function() -- See `:help cmp` local cmp = require("cmp") local luasnip = require("luasnip") luasnip.config.setup({}) cmp.setup({ snippet = { expand = function(args) luasnip.lsp_expand(args.body) end, }, completion = { completeopt = "menu,menuone,noinsert" }, -- For an understanding of why these mappings were -- chosen, you will need to read `:help ins-completion` -- -- No, but seriously. Please read `:help ins-completion`, it is really good! mapping = cmp.mapping.preset.insert({ -- Select the [n]ext item [""] = cmp.mapping.select_next_item(), -- Select the [p]revious item [""] = cmp.mapping.select_prev_item(), -- Scroll the documentation window [b]ack / [f]orward [""] = cmp.mapping.scroll_docs(-4), [""] = cmp.mapping.scroll_docs(4), -- Accept ([y]es) the completion. -- This will auto-import if your LSP supports it. -- This will expand snippets if the LSP sent a snippet. [""] = cmp.mapping.confirm({ select = true }), -- If you prefer more traditional completion keymaps, -- you can uncomment the following lines --[''] = cmp.mapping.confirm { select = true }, --[''] = cmp.mapping.select_next_item(), --[''] = cmp.mapping.select_prev_item(), -- Manually trigger a completion from nvim-cmp. -- Generally you don't need this, because nvim-cmp will display -- completions whenever it has completion options available. [""] = cmp.mapping.complete({}), -- Think of as moving to the right of your snippet expansion. -- So if you have a snippet that's like: -- function $name($args) -- $body -- end -- -- will move you to the right of each of the expansion locations. -- is similar, except moving you backwards. [""] = cmp.mapping(function() if luasnip.expand_or_locally_jumpable() then luasnip.expand_or_jump() end end, { "i", "s" }), [""] = cmp.mapping(function() if luasnip.locally_jumpable(-1) then luasnip.jump(-1) end end, { "i", "s" }), -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps }), sources = { { name = "nvim_lsp" }, { name = "luasnip" }, { name = "path" }, }, }) end, }, }) require("gen").prompts["Generate_Doxygen"] = { prompt = "Generate doxygen that document this code :\n$text", } -- require'lspconfig'.clangd.setup{} -- Set colorscheme if vim.fn.has("gui_running") == 1 then vim.cmd("colorscheme darkblue") else vim.cmd("colorscheme kanagawa-wave") end vim.opt.runtimepath:append("~/.vim/bundle/Vundle.vim/") -- See `:help telescope.builtin` local builtin = require("telescope.builtin") vim.keymap.set("n", "sh", builtin.help_tags, { desc = "[S]earch [H]elp" }) vim.keymap.set("n", "sk", builtin.keymaps, { desc = "[S]earch [K]eymaps" }) vim.keymap.set("n", "sf", builtin.find_files, { desc = "[S]earch [F]iles" }) vim.keymap.set("n", "ss", builtin.builtin, { desc = "[S]earch [S]elect Telescope" }) vim.keymap.set("n", "sw", builtin.grep_string, { desc = "[S]earch current [W]ord" }) vim.keymap.set("n", "sg", builtin.live_grep, { desc = "[S]earch by [G]rep" }) vim.keymap.set("n", "sd", builtin.diagnostics, { desc = "[S]earch [D]iagnostics" }) vim.keymap.set("n", "sr", builtin.resume, { desc = "[S]earch [R]esume" }) vim.keymap.set("n", "s.", builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) vim.keymap.set("n", "", builtin.buffers, { desc = "[ ] Find existing buffers" })