Compare commits
2 Commits
master
...
Jardin_con
| Author | SHA1 | Date | |
|---|---|---|---|
|
cc3ca2297a | ||
|
|
ca8799f7c7 |
@ -4,10 +4,7 @@ before_script:
|
||||
- arduino --install-boards esp8266:esp8266 || true
|
||||
#replaced by a fork https://github.com/shmuelzon/Adafruit_MQTT_Library.git that have mqtt retains
|
||||
# - arduino --install-library "Adafruit MQTT Library" || true
|
||||
- arduino --install-library "Adafruit BME680 Library" || true
|
||||
- arduino --install-library "Adafruit Unified Sensor" || true
|
||||
- arduino --install-library "DHT sensor library" || true
|
||||
- arduino --install-library "BSEC Software Library" || true
|
||||
- arduino --board esp8266:esp8266:generic --save-prefs
|
||||
- arduino --pref "compiler.warning_level=all" --save-prefs
|
||||
|
||||
|
||||
16
Readme.md
16
Readme.md
@ -1,5 +1,3 @@
|
||||
[](https://gitlab.mathux.org/Mathieu/Domotique/commits/master)
|
||||
|
||||
# Introduction
|
||||
|
||||
This is a bunch of project that aims to provide a reusable platform for different kind of project using ESP8266.
|
||||
@ -31,17 +29,5 @@ Those measure can be shared by MQTT(s). MQTT details (server, username, passwd,
|
||||
|
||||
To interface with BMP180, the following library should be installed into Arduino environment: https://github.com/mmaret/BMP180_Breakout_Arduino_Library/archive/master.zip
|
||||
|
||||
To use mqtt, a fork of the Adafruit Mqtt library should be installed (gitlab@gitlab.mathux.org:Mathieu/adaAdafruit_MQTT_Libraryfruit_mqtt_library.git
|
||||
-b retain_support).
|
||||
To use mqtt, a fork of the Adafruit Mqtt library should be installed (https://github.com/shmuelzon/Adafruit_MQTT_Library/tree/support_retain).
|
||||
This have been tested against a mosquitto server
|
||||
|
||||
Quick cmdline to install deps:
|
||||
|
||||
cd ~/Arduino/libraries/
|
||||
git clone gitlab@gitlab.mathux.org:Mathieu/ESP8266_HIB.git
|
||||
git clone git@github.com:mmaret/BMP180_Breakout_Arduino_Library.git
|
||||
git clone gitlab@gitlab.mathux.org:Mathieu/adaAdafruit_MQTT_Libraryfruit_mqtt_library.git -b support_retain
|
||||
arduino --install-library "Adafruit BME680 Library"
|
||||
arduino --install-library "Adafruit Unified Sensor"
|
||||
arduino --install-library "DHT sensor library"
|
||||
arduino --install-library "BSEC Software Library" # Then you have to follow the instruction in the README.md in the BSEC install folder
|
||||
|
||||
@ -1,26 +0,0 @@
|
||||
#pragma once
|
||||
#ifdef CONFIG_ENABLE_BME680
|
||||
#include <Wire.h>
|
||||
#include <SPI.h>
|
||||
#include <Adafruit_Sensor.h>
|
||||
#include "Adafruit_BME680.h"
|
||||
#include "debug_sketch.h"
|
||||
|
||||
#define BME_SCK 13
|
||||
#define BME_MISO 12
|
||||
#define BME_MOSI 11
|
||||
#define BME_CS 10
|
||||
|
||||
//Use Default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
|
||||
|
||||
#define SEALEVELPRESSURE_HPA (1013.25)
|
||||
|
||||
int BME680GetMeasure(float &t, float &p, float &h, float &g, float &a);
|
||||
int BME680Setup();
|
||||
bool BME680IsConnected();
|
||||
|
||||
#else //CONFIG_ENABLE_BME680
|
||||
int BME680GetMeasure(float &, float &, float&, float &, float &){return -1;};
|
||||
int BME680Setup(){SKETCH_DEBUG_PRINTLN("BME680 is disabled at build time"); return -1;};
|
||||
bool BME680IsConnected(){return false;};
|
||||
#endif
|
||||
@ -1,40 +0,0 @@
|
||||
#ifdef CONFIG_ENABLE_BME680
|
||||
#include "BME680.h"
|
||||
Adafruit_BME680 bme; // I2C
|
||||
//Adafruit_BME680 bme(BME_CS); // hardware SPI
|
||||
//Adafruit_BME680 bme(BME_CS, BME_MOSI, BME_MISO, BME_SCK);
|
||||
|
||||
int bme680Connected = 0;
|
||||
|
||||
int BME680Setup() {
|
||||
bme680Connected = bme.begin();
|
||||
if (!bme680Connected){
|
||||
SKETCH_DEBUG_PRINTLN("Cannot connect to BME680");
|
||||
return -1;
|
||||
}
|
||||
// Set up oversampling and filter initialization
|
||||
bme.setTemperatureOversampling(BME680_OS_8X);
|
||||
bme.setHumidityOversampling(BME680_OS_2X);
|
||||
bme.setPressureOversampling(BME680_OS_4X);
|
||||
bme.setIIRFilterSize(BME680_FILTER_SIZE_3);
|
||||
bme.setGasHeater(320, 150); // 320*C for 150 ms
|
||||
return 0;
|
||||
}
|
||||
|
||||
bool BME680IsConnected() {
|
||||
return bme680Connected != 0;
|
||||
}
|
||||
|
||||
int BME680GetMeasure(float &t, float &p, float &h, float &g, float &a){
|
||||
if(!bme.performReading()){
|
||||
SKETCH_DEBUG_PRINTLN("Cannot read BME680 measure");
|
||||
return -1;
|
||||
}
|
||||
t = bme.temperature;
|
||||
p = bme.pressure / 100.0;
|
||||
h = bme.humidity;
|
||||
g = bme.gas_resistance / 1000.0;
|
||||
a = bme.readAltitude(SEALEVELPRESSURE_HPA);
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
@ -1,16 +0,0 @@
|
||||
#pragma once
|
||||
#ifdef CONFIG_BME680_BSEC_ENABLE
|
||||
int BME680BSECGetMeasure(float &t, float &p, float &h, float &iaq, float &iaqAcc);
|
||||
int BME680BSECSetup();
|
||||
bool BME680BSECIsConnected();
|
||||
#else // CONFIG_ENABLE_BME680_BSEC
|
||||
#define BSEC_MAX_STATE_BLOB_SIZE 0
|
||||
int BME680BSECGetMeasure(float &, float &, float &, float &, float &) {
|
||||
return -1;
|
||||
};
|
||||
int BME680BSECSetup() {
|
||||
SKETCH_DEBUG_PRINTLN("BME680 BSEC is disabled at build time");
|
||||
return -1;
|
||||
};
|
||||
bool BME680BSECIsConnected() { return false; };
|
||||
#endif
|
||||
@ -1,153 +0,0 @@
|
||||
#ifdef CONFIG_BME680_BSEC_ENABLE
|
||||
#include "BME680_BSEC.h"
|
||||
|
||||
#include "bsec.h"
|
||||
/* Configure the BSEC library with information about the sensor
|
||||
18v/33v = Voltage at Vdd. 1.8V or 3.3V
|
||||
3s/300s = BSEC operating mode, BSEC_SAMPLE_RATE_LP or BSEC_SAMPLE_RATE_ULP
|
||||
4d/28d = Operating age of the sensor in days
|
||||
generic_18v_3s_4d
|
||||
generic_18v_3s_28d
|
||||
generic_18v_300s_4d
|
||||
generic_18v_300s_28d
|
||||
generic_33v_3s_4d
|
||||
generic_33v_3s_28d
|
||||
generic_33v_300s_4d
|
||||
generic_33v_300s_28d
|
||||
*/
|
||||
const uint8_t bsec_config_iaq[] = {
|
||||
#if CONFIG_SAMPLING_PERIOD_MS == 3000
|
||||
#include "config/generic_33v_3s_4d/bsec_iaq.txt"
|
||||
#elif CONFIG_SAMPLING_PERIOD_MS == 300000
|
||||
#include "config/generic_33v_300s_4d/bsec_iaq.txt"
|
||||
#else
|
||||
#error "Unsupport CONFIG_SAMPLING_PERIOD_MS (3000 and 300000 are supported)"
|
||||
#endif
|
||||
};
|
||||
|
||||
#define STATE_SAVE_PERIOD \
|
||||
UINT32_C(360 * 60 * 1000) // 360 minutes - 4 times a day
|
||||
uint16_t stateUpdateCounter = 0;
|
||||
Bsec iaqSensor;
|
||||
uint8_t bsecState[BSEC_MAX_STATE_BLOB_SIZE] = {0};
|
||||
|
||||
// Helper function definitions
|
||||
int checkIaqSensorStatus(void) {
|
||||
if (iaqSensor.status != BSEC_OK) {
|
||||
if (iaqSensor.status < BSEC_OK) {
|
||||
SKETCH_DEBUG_PRINTLN("BSEC error code : " + String(iaqSensor.status));
|
||||
|
||||
return -2;
|
||||
} else {
|
||||
SKETCH_DEBUG_PRINTLN("BSEC warning code : " + String(iaqSensor.status));
|
||||
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
if (iaqSensor.bme680Status != BME680_OK) {
|
||||
if (iaqSensor.bme680Status < BME680_OK) {
|
||||
SKETCH_DEBUG_PRINTLN("BME680 error code : " + String(iaqSensor.bme680Status));
|
||||
|
||||
return -2;
|
||||
} else {
|
||||
SKETCH_DEBUG_PRINTLN("BME680 warning code : " + String(iaqSensor.bme680Status));
|
||||
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
iaqSensor.status = BSEC_OK;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void updateState(void)
|
||||
{
|
||||
bool update = false;
|
||||
/* Set a trigger to save the state. Here, the state is saved every STATE_SAVE_PERIOD with the
|
||||
* first state being saved once the algorithm achieves full calibration, i.e. iaqAccuracy = 3
|
||||
*/
|
||||
if (stateUpdateCounter == 0) {
|
||||
if (iaqSensor.iaqAccuracy >= 3) {
|
||||
update = true;
|
||||
stateUpdateCounter++;
|
||||
}
|
||||
} else {
|
||||
/* Update every STATE_SAVE_PERIOD milliseconds */
|
||||
if ((stateUpdateCounter * STATE_SAVE_PERIOD) < millis()) {
|
||||
update = true;
|
||||
stateUpdateCounter++;
|
||||
}
|
||||
}
|
||||
|
||||
if (update) {
|
||||
iaqSensor.getState(bsecState);
|
||||
checkIaqSensorStatus();
|
||||
|
||||
SKETCH_DEBUG_PRINTLN("Writing state to EEPROM");
|
||||
|
||||
EepromSaveBME680State(bsecState);
|
||||
}
|
||||
}
|
||||
|
||||
int BME680BSECGetMeasure(float &t, float &p, float &h, float &iaq, float &iaqAcc)
|
||||
{
|
||||
if (iaqSensor.run()) { // If new data is available
|
||||
t = iaqSensor.temperature;
|
||||
p = iaqSensor.pressure/100;
|
||||
h = iaqSensor.humidity;
|
||||
iaq = iaqSensor.iaq;
|
||||
iaqAcc = iaqSensor.iaqAccuracy;
|
||||
updateState();
|
||||
} else {
|
||||
return -1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
int BME680BSECSetup()
|
||||
{
|
||||
Wire.begin();
|
||||
iaqSensor.begin(CONFIG_BME680_BSEC_I2C_ADDR, Wire);
|
||||
|
||||
SKETCH_DEBUG_PRINTLN("\nBSEC library version " + String(iaqSensor.version.major) + "." +
|
||||
String(iaqSensor.version.minor) + "." + String(iaqSensor.version.major_bugfix) +
|
||||
"." + String(iaqSensor.version.minor_bugfix));
|
||||
|
||||
if (checkIaqSensorStatus())
|
||||
return -1;
|
||||
|
||||
iaqSensor.setConfig(bsec_config_iaq);
|
||||
|
||||
if (checkIaqSensorStatus())
|
||||
return -1;
|
||||
|
||||
if (!EepromLoadBME680State(bsecState))
|
||||
iaqSensor.setState(bsecState);
|
||||
|
||||
if (checkIaqSensorStatus())
|
||||
return -1;
|
||||
|
||||
bsec_virtual_sensor_t sensorList[7] = {
|
||||
BSEC_OUTPUT_RAW_TEMPERATURE,
|
||||
BSEC_OUTPUT_RAW_PRESSURE,
|
||||
BSEC_OUTPUT_RAW_HUMIDITY,
|
||||
BSEC_OUTPUT_RAW_GAS,
|
||||
BSEC_OUTPUT_IAQ,
|
||||
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_TEMPERATURE,
|
||||
BSEC_OUTPUT_SENSOR_HEAT_COMPENSATED_HUMIDITY,
|
||||
};
|
||||
|
||||
iaqSensor.updateSubscription(sensorList, 7, BSEC_SAMPLE_RATE_LP);
|
||||
if (checkIaqSensorStatus())
|
||||
return -1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
bool BME680BSECIsConnected()
|
||||
{
|
||||
if (checkIaqSensorStatus())
|
||||
return false;
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
@ -8,9 +8,11 @@ int BMP180Setup(int sda, int scl) {
|
||||
bmp180Connected = bmp180.begin(sda, scl);
|
||||
if (!bmp180Connected){
|
||||
SKETCH_DEBUG_PRINTLN("Cannot connect to BMP180");
|
||||
return -1;
|
||||
goto err;
|
||||
}
|
||||
return 0;
|
||||
err:
|
||||
return -1;
|
||||
}
|
||||
|
||||
bool BMP180IsConnected() {
|
||||
|
||||
@ -1,15 +0,0 @@
|
||||
#pragma once
|
||||
#ifdef CONFIG_ENABLE_BMP280
|
||||
#include "debug_sketch.h"
|
||||
|
||||
int BMP280GetTemperature(double &t);
|
||||
int BMP280GetTempAndPressure(double &t, double &p);
|
||||
int BMP280Setup();
|
||||
bool BMP280IsConnected();
|
||||
|
||||
#else //CONFIG_ENABLE_BMP80
|
||||
int BMP280GetTemperature(double &){return -1;};
|
||||
int BMP280GetTempAndPressure(double &, double &){return -1;};
|
||||
int BMP280Setup(){SKETCH_DEBUG_PRINTLN("BMP280 is disabled at build time"); return -1;};
|
||||
bool BMP280IsConnected(){return false;};
|
||||
#endif
|
||||
@ -1,44 +0,0 @@
|
||||
#ifdef CONFIG_ENABLE_BMP280
|
||||
#include "BMP280.h"
|
||||
#include <Adafruit_BMP280.h>
|
||||
Adafruit_BMP280 bmp;
|
||||
int bmpConnected = 0;
|
||||
|
||||
int BMP280Setup()
|
||||
{
|
||||
bmpConnected = bmp.begin(BMP280_ADDRESS_ALT);
|
||||
if (!bmpConnected) {
|
||||
SKETCH_DEBUG_PRINTLN("Cannot connect to BMP280");
|
||||
return -1;
|
||||
}
|
||||
/* Default settings from datasheet. */
|
||||
bmp.setSampling(Adafruit_BMP280::MODE_NORMAL, /* Operating Mode. */
|
||||
Adafruit_BMP280::SAMPLING_X2, /* Temp. oversampling */
|
||||
Adafruit_BMP280::SAMPLING_X16, /* Pressure oversampling */
|
||||
Adafruit_BMP280::FILTER_X16, /* Filtering. */
|
||||
Adafruit_BMP280::STANDBY_MS_500); /* Standby time. */
|
||||
return 0;
|
||||
}
|
||||
|
||||
bool BMP280IsConnected()
|
||||
{
|
||||
return bmpConnected != 0;
|
||||
}
|
||||
|
||||
int BMP280GetTemperature(double &t)
|
||||
{
|
||||
if (!BMP280IsConnected())
|
||||
return -1;
|
||||
t = bmp.readTemperature();
|
||||
return 0;
|
||||
}
|
||||
|
||||
int BMP280GetTempAndPressure(double &t, double &p)
|
||||
{
|
||||
if (!BMP280IsConnected())
|
||||
return -1;
|
||||
t = bmp.readTemperature();
|
||||
p = bmp.readPressure()/100;
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
@ -15,14 +15,9 @@ typedef struct productConfig_t {
|
||||
uint32_t mask;
|
||||
uint32_t dns;
|
||||
uint32_t dns2;
|
||||
uint8_t channel;
|
||||
char *bssid;
|
||||
uint32_t samplingPeriod;
|
||||
|
||||
} productConfig;
|
||||
|
||||
int EepromSaveConfig(productConfig &config);
|
||||
int EepromSaveBootMode(uint8_t bootMode);
|
||||
void EepromReadConfig(productConfig &config);
|
||||
int EepromSaveBME680State(uint8_t *bsecState);
|
||||
int EepromLoadBME680State(uint8_t *bsecState);
|
||||
|
||||
|
||||
@ -1,17 +1,11 @@
|
||||
/* EEPROM LAYOUT
|
||||
"BOOTMODE;SSID;PASSWORD;HOSTNAME;MQTT_SERVER;MQTT_USERNAME;MQTT_PASSWD;MQTT_PORT;IP_CONFIG;IP;GATEWAY;NETMASK;DNS1;DNS2;WIFI_CHANNEL;WIFI_BSSID;"
|
||||
"BOOTMODE;SSID;PASSWORD;HOSTNAME;MQTT_SERVER;MQTT_USERNAME;MQTT_PASSWD;MQTT_PORT;IP_CONFIG;IP;GATEWAY;NETMASK;DNS1;DNS2;"
|
||||
BOOTMODE could be 0 for Setup, 1 for normal use, 2 for OTA
|
||||
IP_CONFIG could be 0 for DHCP, 1 for static
|
||||
Setup mode is trigger by setting GPIO3 to ground or at first boot
|
||||
*/
|
||||
#include "EEPROM.h"
|
||||
|
||||
#define BME680_BSEC_EEPROM_ORIG (CONFIG_EEPROM_SIZE)
|
||||
|
||||
#if (CONFIG_EEPROM_SIZE + BSEC_MAX_STATE_BLOB_SIZE) >= SPI_FLASH_SEC_SIZE
|
||||
#error "CONFIG_EEPROM_SIZE too big"
|
||||
#endif
|
||||
|
||||
char eeprom[CONFIG_EEPROM_SIZE];
|
||||
|
||||
int EepromSaveConfig(productConfig &config) {
|
||||
@ -23,8 +17,7 @@ int EepromSaveConfig(productConfig &config) {
|
||||
+ String(config.mqttPort) + ";"
|
||||
+ String(config.ip_mode) + ";"
|
||||
+ config.ip + ";" + config.gw + ";" + config.mask + ";"
|
||||
+ config.dns + ";" + config.dns2 + ";" + config.channel + ";"
|
||||
+ config.bssid + ";" + config.samplingPeriod + ";";
|
||||
+ config.dns + ";" + config.dns2 + ";";
|
||||
|
||||
if (eeprom.length() > CONFIG_EEPROM_SIZE )
|
||||
return -EMSGSIZE;
|
||||
@ -60,6 +53,7 @@ void readConfElement(char** element, int &i) {
|
||||
SKETCH_DEBUG_PRINTLN("Looks like there is a configuration issue (too long)");
|
||||
**element = '\0';
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
void EepromReadConfig(productConfig &config) {
|
||||
@ -92,58 +86,14 @@ void EepromReadConfig(productConfig &config) {
|
||||
readConfElement(&tmpString, i);
|
||||
config.ip_mode = atoi(tmpString);
|
||||
readConfElement(&tmpString, i);
|
||||
config.ip = atoll(tmpString);
|
||||
config.ip = atoi(tmpString);
|
||||
readConfElement(&tmpString, i);
|
||||
config.gw = atoll(tmpString);
|
||||
config.gw = atoi(tmpString);
|
||||
readConfElement(&tmpString, i);
|
||||
config.mask = atoll(tmpString);
|
||||
config.mask = atoi(tmpString);
|
||||
readConfElement(&tmpString, i);
|
||||
config.dns = atoll(tmpString);
|
||||
config.dns = atoi(tmpString);
|
||||
readConfElement(&tmpString, i);
|
||||
config.dns2 = atoll(tmpString);
|
||||
readConfElement(&tmpString, i);
|
||||
config.channel = atoi(tmpString);
|
||||
readConfElement(&config.bssid, i);
|
||||
readConfElement(&tmpString, i);
|
||||
config.samplingPeriod = atoi(tmpString);
|
||||
config.dns2 = atoi(tmpString);
|
||||
|
||||
}
|
||||
|
||||
int EepromSaveBME680State(uint8_t *bsecState)
|
||||
{
|
||||
for (uint16_t i = BME680_BSEC_EEPROM_ORIG;
|
||||
i < BME680_BSEC_EEPROM_ORIG + BSEC_MAX_STATE_BLOB_SIZE; i++) {
|
||||
EEPROM.write(i + 1, bsecState[i]);
|
||||
}
|
||||
|
||||
EEPROM.write(BME680_BSEC_EEPROM_ORIG, BSEC_MAX_STATE_BLOB_SIZE);
|
||||
EEPROM.commit();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int EepromLoadBME680State(uint8_t *bsecState)
|
||||
{
|
||||
if (EEPROM.read(BME680_BSEC_EEPROM_ORIG) == BSEC_MAX_STATE_BLOB_SIZE) {
|
||||
// Existing state in EEPROM
|
||||
SKETCH_DEBUG_PRINTLN("Reading BME680 state from EEPROM");
|
||||
|
||||
for (uint16_t i = BME680_BSEC_EEPROM_ORIG;
|
||||
i < BME680_BSEC_EEPROM_ORIG + BSEC_MAX_STATE_BLOB_SIZE; i++) {
|
||||
bsecState[i] = EEPROM.read(i + 1);
|
||||
}
|
||||
|
||||
return 0;
|
||||
} else {
|
||||
// Erase the EEPROM with zeroes
|
||||
SKETCH_DEBUG_PRINTLN("Erasing EEPROM for BME680 state");
|
||||
|
||||
for (uint16_t i = BME680_BSEC_EEPROM_ORIG;
|
||||
i < BME680_BSEC_EEPROM_ORIG + BSEC_MAX_STATE_BLOB_SIZE + 1; i++)
|
||||
EEPROM.write(i, 0);
|
||||
|
||||
EEPROM.commit();
|
||||
|
||||
return -1;
|
||||
}
|
||||
}
|
||||
|
||||
@ -1,46 +1,15 @@
|
||||
#pragma once
|
||||
|
||||
//FEED have the following formats /feeds/USER/DEVICE_NAME/....
|
||||
#define TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/temperature"
|
||||
#define PRESSURE_FEED_FORMAT "/feeds/%s/%s/pressure"
|
||||
#define TEMPERATURE_DHT_FEED_FORMAT "/feeds/%s/%s/dht/temperature"
|
||||
#define HUMIDITY_DHT_FEED_FORMAT "/feeds/%s/%s/dht/humidity"
|
||||
#define DRY_FEED_FORMAT "/feeds/%s/%s/dry"
|
||||
#define GPIO_FEED_FORMAT "/feeds/%s/%s/gpio/%d"
|
||||
#define GPIO_SET_FEED_FORMAT "/feeds/%s/%s/gpio/%d/set"
|
||||
#define PWM_FEED_FORMAT "/feeds/%s/%s/gpio/%d"
|
||||
#define PWM_SET_FEED_FORMAT "/feeds/%s/%s/gpio/%d/set"
|
||||
#define IP_FEED_FORMAT "/feeds/%s/%s/configuration/ip/addr"
|
||||
#define BME680_TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/bme680/temperature"
|
||||
#define BME680_PRESSURE_FEED_FORMAT "/feeds/%s/%s/bme680/pressure"
|
||||
#define BME680_HUMIDITY_FEED_FORMAT "/feeds/%s/%s/bme680/humidity"
|
||||
#define BME680_GAZ_FEED_FORMAT "/feeds/%s/%s/bme680/gaz"
|
||||
#define BME680_ALT_FEED_FORMAT "/feeds/%s/%s/bme680/alt"
|
||||
#define BME680_IAQ_FEED_FORMAT "/feeds/%s/%s/bme680/iaq"
|
||||
#define BME680_IAQ_ACC_FEED_FORMAT "/feeds/%s/%s/bme680/iaqAcc"
|
||||
#define TELEINFO_IINST_FEED_FORMAT "/feeds/%s/%s/teleinfo/iinst"
|
||||
#define TELEINFO_PAPP_FEED_FORMAT "/feeds/%s/%s/teleinfo/papp"
|
||||
#define TELEINFO_BASE_FEED_FORMAT "/feeds/%s/%s/teleinfo/base"
|
||||
#define SCD4X_TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/scd4x/temperature"
|
||||
#define SCD4X_HUMIDITY_FEED_FORMAT "/feeds/%s/%s/scd4x/humidity"
|
||||
#define SCD4X_CO2_FEED_FORMAT "/feeds/%s/%s/scd4x/co2"
|
||||
#ifndef CONFIG_DISABLE_MQTT
|
||||
#include "Adafruit_MQTT.h"
|
||||
|
||||
typedef struct {uint8_t updated; int value;} gpioInfo;
|
||||
|
||||
struct mqttInfo {
|
||||
float value;
|
||||
const char *topic;
|
||||
uint8_t retain;
|
||||
uint8_t qos;
|
||||
};
|
||||
int MqttBatchPublish(std::vector<struct mqttInfo> tab, ...);
|
||||
Adafruit_MQTT_Publish *MqttCreatePublisher(uint8_t qos, uint8_t retain, const char *fmt, ...);
|
||||
int MqttConnect();
|
||||
int MqttIsConnected();
|
||||
int MqttSetup(const char *server, const char *user, const char *passwd, int port, const char * hostname);
|
||||
int MqttSetup(char *server, char *user, char *passwd, int port, char * hostname);
|
||||
template<typename T> int MqttPublish(Adafruit_MQTT_Publish *publisher, T value);
|
||||
int MqttPublishBMP180(double temp, double pressure);
|
||||
int MqttPublishDHT(float temp, float humidity);
|
||||
int MqttPublishDry(int dry);
|
||||
int MqttPublishIp(const String &ip);
|
||||
void MqttCheckSubscription();
|
||||
void MqttCheckIRQ();
|
||||
@ -49,11 +18,13 @@ void MqttChangePWMValue(int gpio, int value);
|
||||
void MqttNofityIRQ(uint8_t gpio, int value);
|
||||
void MqttNofity(int gpio, int value);
|
||||
#else
|
||||
int MqttBatchPublish(std::vector<struct mqttInfo> tab, ...){return 0;}
|
||||
int MqttConnect(){return 0;}
|
||||
int MqttIsConnected(){return 0;}
|
||||
int MqttSetup(const char *server, const char *user, const char *passwd, int port, const char * hostname){return 0;}
|
||||
int MqttSetup(char *server, char *user, char *passwd, int port, char * hostname){return 0;}
|
||||
template<typename T> int MqttPublish(Adafruit_MQTT_Publish *publisher, T value){return 0;}
|
||||
int MqttPublishBMP180(double temp, double pressure){return 0;}
|
||||
int MqttPublishDHT(float temp, float humidity){return 0;}
|
||||
int MqttPublishDry(int dry){return 0;}
|
||||
int MqttPublishIP(const String &ip){return 0;}
|
||||
void MqttCheckSubscription(){}
|
||||
void MqttCheckIRQ(){}
|
||||
|
||||
@ -6,6 +6,11 @@
|
||||
#define MAX_PIN 15
|
||||
#define MAX_GPIO_OBSERVED (MAXSUBSCRIPTIONS*2)
|
||||
Adafruit_MQTT_Client *mqtt;
|
||||
Adafruit_MQTT_Publish *mqtt_temp;
|
||||
Adafruit_MQTT_Publish *mqtt_pressure;
|
||||
Adafruit_MQTT_Publish *mqtt_dht_temp;
|
||||
Adafruit_MQTT_Publish *mqtt_dht_humidity;
|
||||
Adafruit_MQTT_Publish *mqtt_dry;
|
||||
Adafruit_MQTT_Publish *mqtt_ip;
|
||||
Adafruit_MQTT_Publish *mqttGpio[MAXSUBSCRIPTIONS] = {};
|
||||
Adafruit_MQTT_Publish *mqttPwm[MAXSUBSCRIPTIONS] = {};
|
||||
@ -14,56 +19,76 @@ gpioInfo mqttIRQ[MAX_PIN + 1] = {};
|
||||
|
||||
#define FEED_MAX_SIZE 96
|
||||
|
||||
//FEED have the following formats /feeds/USER/DEVICE_NAME/....
|
||||
#define TEMPERATURE_FEED_FORMAT "/feeds/%s/%s/temperature"
|
||||
#define PRESSURE_FEED_FORMAT "/feeds/%s/%s/pressure"
|
||||
#define TEMPERATURE_DHT_FEED_FORMAT "/feeds/%s/%s/dht/temperature"
|
||||
#define HUMIDITY_DHT_FEED_FORMAT "/feeds/%s/%s/dht/humidity"
|
||||
#define DRY_FEED_FORMAT "/feeds/%s/%s/dry"
|
||||
#define GPIO_FEED_FORMAT "/feeds/%s/%s/gpio/%d"
|
||||
#define GPIO_SET_FEED_FORMAT "/feeds/%s/%s/gpio/%d/set"
|
||||
#define PWM_FEED_FORMAT "/feeds/%s/%s/gpio/%d"
|
||||
#define PWM_SET_FEED_FORMAT "/feeds/%s/%s/gpio/%d/set"
|
||||
#define IP_FEED_FORMAT "/feeds/%s/%s/configuration/ip/addr"
|
||||
|
||||
char *mqttId;
|
||||
|
||||
bool isMqttConfigured = false;
|
||||
bool useMqtts = false;
|
||||
|
||||
|
||||
int MqttSetup(const char *server, const char *user, const char *passwd, int port, const char *hostname) {
|
||||
int MqttSetup(char *server, char *user, char *passwd, int port, char *hostname) {
|
||||
mqttId = hostname;
|
||||
useMqtts = (port == 8883);
|
||||
isMqttConfigured = server[0] != '\0';
|
||||
|
||||
if (!isMqttConfigured)
|
||||
if(!isMqttConfigured)
|
||||
return 0;
|
||||
|
||||
#ifndef CONFIG_DISABLE_SSL
|
||||
if (useMqtts)
|
||||
if(useMqtts)
|
||||
mqtt = new Adafruit_MQTT_Client(new WiFiClientSecure(), server, port, user, passwd);
|
||||
else
|
||||
#endif
|
||||
mqtt = new Adafruit_MQTT_Client(new WiFiClient(), server, port, user, passwd);
|
||||
|
||||
mqtt_ip = MqttCreatePublisher(0, 1, IP_FEED_FORMAT, user, hostname);
|
||||
mqtt_dht_temp = MqttCreatePublisher(0, 0, TEMPERATURE_DHT_FEED_FORMAT, user, mqttId);
|
||||
mqtt_dht_humidity = MqttCreatePublisher(0, 0, HUMIDITY_DHT_FEED_FORMAT, user, mqttId);
|
||||
mqtt_temp = MqttCreatePublisher(0, 0, TEMPERATURE_FEED_FORMAT, user, mqttId);
|
||||
mqtt_pressure = MqttCreatePublisher(0, 0, PRESSURE_FEED_FORMAT, user, mqttId);
|
||||
mqtt_dry = MqttCreatePublisher(0, 0, DRY_FEED_FORMAT, user, mqttId);
|
||||
mqtt_ip = MqttCreatePublisher(0, 1, IP_FEED_FORMAT, user, mqttId);
|
||||
|
||||
if (NB_ELEMENTS(gpioControlled) + NB_ELEMENTS(pwmControlled) > MAXSUBSCRIPTIONS) {
|
||||
if (NB_ELEMENTS(gpioControlled) + NB_ELEMENTS(pwmControlled) > MAXSUBSCRIPTIONS){
|
||||
SKETCH_DEBUG_PRINTF("Too much gpio/pwm to control\n Nb gpio %d Nb pwm %d Max is %d",
|
||||
NB_ELEMENTS(gpioControlled), NB_ELEMENTS(pwmControlled), MAXSUBSCRIPTIONS);
|
||||
return -1;
|
||||
}
|
||||
if (NB_ELEMENTS(gpioObserved) > MAX_GPIO_OBSERVED) {
|
||||
if (NB_ELEMENTS(gpioObserved) > MAX_GPIO_OBSERVED){
|
||||
SKETCH_DEBUG_PRINTF("Too much gpio observed\n Nb gpio %d Nb is %d",
|
||||
NB_ELEMENTS(gpioObserved), MAX_GPIO_OBSERVED);
|
||||
return -1;
|
||||
}
|
||||
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(gpioControlled); i++) {
|
||||
mqtt->subscribe(MqttCreateSubscribe(GPIO_SET_FEED_FORMAT, user, hostname, gpioControlled[i]));
|
||||
mqttGpio[i] = MqttCreatePublisher(0, 0, GPIO_FEED_FORMAT, user, hostname, gpioControlled[i]);
|
||||
mqtt->subscribe(MqttCreateSubscribe(GPIO_SET_FEED_FORMAT, user, mqttId, gpioControlled[i]));
|
||||
mqttGpio[i] = MqttCreatePublisher(0, 0, GPIO_FEED_FORMAT, user, mqttId, gpioControlled[i]);
|
||||
}
|
||||
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(gpioObserved) && i < MAX_GPIO_OBSERVED ; i++) {
|
||||
mqttGpioObserved[i] = MqttCreatePublisher(0, 0, GPIO_FEED_FORMAT, user, hostname, gpioObserved[i]);
|
||||
mqttGpioObserved[i] = MqttCreatePublisher(0, 0, GPIO_FEED_FORMAT, user, mqttId, gpioObserved[i]);
|
||||
new HIB(gpioObserved[i], HIGH, MqttNofityIRQ , MqttNofityIRQ, NULL );
|
||||
}
|
||||
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(pwmControlled); i++) {
|
||||
mqtt->subscribe(MqttCreateSubscribe(PWM_SET_FEED_FORMAT, user, hostname, pwmControlled[i]));
|
||||
mqttPwm[i] = MqttCreatePublisher(0, 0, PWM_FEED_FORMAT, user, hostname, pwmControlled[i]);
|
||||
mqtt->subscribe(MqttCreateSubscribe(PWM_SET_FEED_FORMAT, user, mqttId, pwmControlled[i]));
|
||||
mqttPwm[i] = MqttCreatePublisher(0, 0, PWM_FEED_FORMAT, user, mqttId, pwmControlled[i]);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
Adafruit_MQTT_Publish *MqttCreatePublisher( uint8_t qos, uint8_t retain, const char *fmt, ...) {
|
||||
Adafruit_MQTT_Publish *MqttCreatePublisher( uint8_t qos, uint8_t retain, const char *fmt, ...){
|
||||
char buf[FEED_MAX_SIZE];
|
||||
va_list args;
|
||||
va_start (args, fmt);
|
||||
@ -72,27 +97,7 @@ Adafruit_MQTT_Publish *MqttCreatePublisher( uint8_t qos, uint8_t retain, const c
|
||||
return new Adafruit_MQTT_Publish(mqtt, strdup(buf), qos, retain);
|
||||
}
|
||||
|
||||
|
||||
int MqttBatchPublish(std::vector<struct mqttInfo> tab, ...) {
|
||||
if (MqttConnect()) {
|
||||
SKETCH_DEBUG_PRINTLN("cannot connect to mqtt");
|
||||
return -1;
|
||||
}
|
||||
for (auto info : tab) {
|
||||
char buf[FEED_MAX_SIZE];
|
||||
va_list args;
|
||||
va_start (args, tab);
|
||||
vsnprintf(buf, sizeof(buf), (const char *)info.topic, args);
|
||||
va_end(args);
|
||||
// SKETCH_DEBUG_PRINTF("publishing %f for %s\n", info.value, buf);
|
||||
Adafruit_MQTT_Publish client(mqtt, buf, info.qos, info.retain);
|
||||
if (!client.publish(info.value))
|
||||
SKETCH_DEBUG_PRINTLN("Fail :(");
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
Adafruit_MQTT_Subscribe *MqttCreateSubscribe(const char *fmt, ...) {
|
||||
Adafruit_MQTT_Subscribe *MqttCreateSubscribe(const char *fmt, ...){
|
||||
char buf[FEED_MAX_SIZE];
|
||||
va_list args;
|
||||
va_start (args, fmt);
|
||||
@ -132,7 +137,7 @@ int MqttConnect() {
|
||||
return 0;
|
||||
}
|
||||
|
||||
template<typename T> int MqttPublish(Adafruit_MQTT_Publish *publisher, T value) {
|
||||
template<typename T> int MqttPublish(Adafruit_MQTT_Publish *publisher, T value){
|
||||
if (MqttConnect() == 0) {
|
||||
publisher->publish(value);
|
||||
return 0;
|
||||
@ -140,10 +145,22 @@ template<typename T> int MqttPublish(Adafruit_MQTT_Publish *publisher, T value)
|
||||
return -1;
|
||||
}
|
||||
|
||||
int MqttPublishBMP180(double temp, double pressure) {
|
||||
return MqttPublish(mqtt_temp, temp) + MqttPublish(mqtt_pressure, pressure);
|
||||
}
|
||||
|
||||
int MqttPublishDry(int dry) {
|
||||
return MqttPublish(mqtt_dry, (dry*100)/1024);
|
||||
}
|
||||
|
||||
int MqttPublishIP(const String &ip) {
|
||||
return MqttPublish(mqtt_ip, ip.c_str());
|
||||
}
|
||||
|
||||
int MqttPublishDHT(float temp, float humidity) {
|
||||
return MqttPublish(mqtt_dht_temp, temp) + MqttPublish(mqtt_dht_humidity, humidity);
|
||||
}
|
||||
|
||||
int getGpioFromSubscription(Adafruit_MQTT_Subscribe *subscription, const char *pattern) {
|
||||
char *temp = strstr(subscription->topic, pattern);
|
||||
if (!temp)
|
||||
@ -158,12 +175,12 @@ int getGpioFromSubscription(Adafruit_MQTT_Subscribe *subscription, const char *p
|
||||
return -1;
|
||||
}
|
||||
|
||||
void MqttNofityIRQ(uint8_t gpio, int value) {
|
||||
void MqttNofityIRQ(uint8_t gpio, int value){
|
||||
mqttIRQ[gpio].updated = 1;
|
||||
mqttIRQ[gpio].value = value;
|
||||
}
|
||||
|
||||
void MqttNofity(int gpio, int value) {
|
||||
void MqttNofity(int gpio, int value){
|
||||
if (MqttIsConnected()) {
|
||||
int watchIdx = findIndex(gpio, gpioControlled);
|
||||
if (watchIdx >= 0 ) {
|
||||
@ -189,7 +206,7 @@ void MqttChangePWMValue(int gpio, int value) {
|
||||
|
||||
void MqttCheckIRQ() {
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(mqttIRQ); i++) {
|
||||
if (mqttIRQ[i].updated == 1) {
|
||||
if(mqttIRQ[i].updated == 1){
|
||||
mqttIRQ[i].updated = 0;
|
||||
MqttNofity(i, mqttIRQ[i].value);
|
||||
}
|
||||
@ -197,17 +214,14 @@ void MqttCheckIRQ() {
|
||||
|
||||
}
|
||||
|
||||
void MqttCheckSubscription()
|
||||
{
|
||||
if (mqtt->getSubscriptionCount() == 0)
|
||||
return;
|
||||
void MqttCheckSubscription() {
|
||||
if (MqttConnect() == 0) {
|
||||
Adafruit_MQTT_Subscribe *subscription;
|
||||
while ((subscription = mqtt->readSubscription(0))) {
|
||||
int gpio = getGpioFromSubscription(subscription, "/gpio/");
|
||||
if (gpio > 0 && findIndex(gpio, gpioControlled) >= 0) {
|
||||
SKETCH_DEBUG_PRINTF("Got Subscription for GPIO %d\n", gpio);
|
||||
char *value = (char *)subscription->lastread;
|
||||
char *value = (char *) subscription->lastread;
|
||||
SKETCH_DEBUG_PRINTF("Receive data: %s\n", value);
|
||||
MqttChangeGpioValue(gpio, atoi(value));
|
||||
}
|
||||
@ -215,7 +229,7 @@ void MqttCheckSubscription()
|
||||
gpio = getGpioFromSubscription(subscription, "/pwm/");
|
||||
if (gpio > 0 && findIndex(gpio, pwmControlled) >= 0) {
|
||||
SKETCH_DEBUG_PRINTF("Got Subscription for PWM %d\n", gpio);
|
||||
char *value = (char *)subscription->lastread;
|
||||
char *value = (char *) subscription->lastread;
|
||||
SKETCH_DEBUG_PRINTF("Receive data: %s\n", value);
|
||||
MqttChangePWMValue(gpio, atoi(value));
|
||||
}
|
||||
|
||||
@ -1,23 +0,0 @@
|
||||
#pragma once
|
||||
#ifdef CONFIG_ENABLE_SCD4X
|
||||
#include "debug_sketch.h"
|
||||
|
||||
int SCD4XGetMeasure(float &t, float &h, uint16_t &co2);
|
||||
int SCD4XSetup();
|
||||
bool SCD4XIsConnected();
|
||||
|
||||
#else
|
||||
int SCD4XGetMeasure(float &, float &, uint16_t &)
|
||||
{
|
||||
return -1;
|
||||
};
|
||||
int SCD4XSetup()
|
||||
{
|
||||
SKETCH_DEBUG_PRINTLN("SCD4X is disabled at build time");
|
||||
return -1;
|
||||
};
|
||||
bool SCD4XIsConnected()
|
||||
{
|
||||
return false;
|
||||
};
|
||||
#endif
|
||||
@ -1,61 +0,0 @@
|
||||
#ifdef CONFIG_ENABLE_SCD4X
|
||||
#include "SCD4X.h"
|
||||
#include <Arduino.h>
|
||||
#include <SensirionI2CScd4x.h>
|
||||
#include <Wire.h>
|
||||
|
||||
SensirionI2CScd4x scd4x;
|
||||
|
||||
int SCD4XConnected = 0;
|
||||
|
||||
int SCD4XSetup()
|
||||
{
|
||||
Wire.begin();
|
||||
scd4x.begin(Wire);
|
||||
|
||||
// Stop previous measurement
|
||||
uint16_t error = scd4x.stopPeriodicMeasurement();
|
||||
if (error) {
|
||||
SKETCH_DEBUG_PRINTLN("Cannot connect to SCD4X");
|
||||
return -1;
|
||||
}
|
||||
|
||||
// Start new measurement
|
||||
error = scd4x.startPeriodicMeasurement();
|
||||
if (error) {
|
||||
SKETCH_DEBUG_PRINTLN("Cannot start measurement for SCD4X");
|
||||
return -1;
|
||||
}
|
||||
SCD4XConnected = 1;
|
||||
|
||||
return 0;
|
||||
}
|
||||
int SCD4XGetMeasure(float &temperature, float &humidity, uint16_t &co2)
|
||||
{
|
||||
// Read Measurement
|
||||
bool isDataReady = false;
|
||||
|
||||
uint16_t error = scd4x.getDataReadyFlag(isDataReady);
|
||||
if (error) {
|
||||
SKETCH_DEBUG_PRINTLN("Error trying to execute getDataReadyFlag() for SCD4X ");
|
||||
return -1;
|
||||
}
|
||||
if (!isDataReady) {
|
||||
return -1;
|
||||
}
|
||||
error = scd4x.readMeasurement(co2, temperature, humidity);
|
||||
if (error || co2 == 0) {
|
||||
char errorMsg[256];
|
||||
SKETCH_DEBUG_PRINT("Error with reading measurement. Error : ");
|
||||
errorToString(error, errorMsg, sizeof(errorMsg));
|
||||
SKETCH_DEBUG_PRINTF(" Co2: %d\n", co2);
|
||||
|
||||
return -1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
bool SCD4XIsConnected()
|
||||
{
|
||||
return SCD4XConnected != 0;
|
||||
}
|
||||
#endif
|
||||
@ -1,23 +0,0 @@
|
||||
#pragma once
|
||||
#include "debug_sketch.h"
|
||||
|
||||
#ifdef CONFIG_ENABLE_TELEINFO
|
||||
#include <LibTeleinfo.h>
|
||||
int TeleinfoSetup();
|
||||
int TeleinfoRetrieve(float &iinst, float &papp, float &base);
|
||||
int TeleinfoRetrieve(float &iinst, float &papp, float &base,
|
||||
std::vector<struct mqttInfo> &batchInfo);
|
||||
#else
|
||||
int TeleinfoSetup() {
|
||||
SKETCH_DEBUG_PRINTLN("Teleinfo is disabled at build time");
|
||||
return -1;
|
||||
};
|
||||
|
||||
int TeleinfoRetrieve(float &, float &, float &){
|
||||
return 0;
|
||||
}
|
||||
int TeleinfoRetrieve(float &, float &, float &, std::vector<struct mqttInfo> &)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
@ -1,77 +0,0 @@
|
||||
#ifdef CONFIG_ENABLE_TELEINFO
|
||||
#include "Teleinfo.h"
|
||||
#include <LibTeleinfo.h>
|
||||
#define TELESerial Serial
|
||||
TInfo tinfo;
|
||||
|
||||
int TeleinfoSetup()
|
||||
{
|
||||
TELESerial.begin(1200, SERIAL_7E1);
|
||||
|
||||
tinfo.init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
int TeleinfoRetrieve(float &iinst, float &papp, float &base){
|
||||
int c;
|
||||
|
||||
while ((c = TELESerial.read()) >= 0) {
|
||||
tinfo.process(c);
|
||||
}
|
||||
ValueList *me = tinfo.getList();
|
||||
if (me)
|
||||
me = me->next;
|
||||
while (me) {
|
||||
if (strcmp(me->name, "IINST") == 0) {
|
||||
iinst = atof(me->value);
|
||||
}
|
||||
if (strcmp(me->name, "PAPP") == 0) {
|
||||
papp = atof(me->value);
|
||||
}
|
||||
if (strcmp(me->name, "BASE") == 0) {
|
||||
float tmp = atof(me->value);
|
||||
if(tmp != 0){
|
||||
base = tmp;
|
||||
}
|
||||
}
|
||||
me = me->next;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int TeleinfoRetrieve(float &iinst, float &papp, float &base,
|
||||
std::vector<struct mqttInfo> &batchInfo)
|
||||
{
|
||||
int c;
|
||||
|
||||
while ((c = TELESerial.read()) >= 0) {
|
||||
tinfo.process(c);
|
||||
}
|
||||
ValueList *me = tinfo.getList();
|
||||
if (me)
|
||||
me = me->next;
|
||||
while (me) {
|
||||
if (strcmp(me->name, "IINST") == 0) {
|
||||
iinst = atof(me->value);
|
||||
batchInfo.push_back({iinst, TELEINFO_IINST_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
if (strcmp(me->name, "PAPP") == 0) {
|
||||
papp = atof(me->value);
|
||||
batchInfo.push_back({papp, TELEINFO_PAPP_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
if (strcmp(me->name, "BASE") == 0) {
|
||||
float tmp = atof(me->value);
|
||||
if(tmp != 0){
|
||||
base = tmp;
|
||||
batchInfo.push_back({base, TELEINFO_BASE_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
}
|
||||
me = me->next;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
@ -6,10 +6,10 @@ String gpioControlHTML = "";
|
||||
String pwmControlHTML = "";
|
||||
|
||||
|
||||
void WebBuildGpioObserved(String &html) {
|
||||
if (NB_ELEMENTS(gpioObserved) > 0) {
|
||||
void WebBuildGpioObserved(String &html){
|
||||
if (NB_ELEMENTS(gpioObserved) > 0){
|
||||
html += "<fieldset>"
|
||||
"<legend>Detector</legend>";
|
||||
"<legend>Detector</legend>";
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(gpioObserved) ; i++) {
|
||||
html += "Sensor " + String(gpioObserved[i]) + ": " + digitalRead(gpioObserved[i]) + "<br/>";
|
||||
}
|
||||
@ -19,44 +19,33 @@ void WebBuildGpioObserved(String &html) {
|
||||
}
|
||||
void WebHandleRoot() {
|
||||
String gpioObserved = "";
|
||||
String optimiseConfig = "";
|
||||
|
||||
WebBuildGpioObserved(gpioObserved);
|
||||
if (WiFi.status() == WL_CONNECTED) {
|
||||
optimiseConfig = "<a href=\"/setupPreConfig\">Optimize Config</a><br/>";
|
||||
}
|
||||
|
||||
server.send(200, "text/html",
|
||||
"<head><meta http-equiv=\"refresh\" content=\"" + String(CONFIG_SAMPLING_PERIOD_MS / 1000) + "\" ></head>"
|
||||
"<head><meta http-equiv=\"refresh\" content=\"" + String(CONFIG_SAMPLING_PERIODE_MS / 1000) + "\" ></head>"
|
||||
"<h1>You are connected to " + String(conf.host) + "</h1>"
|
||||
"<fieldset>"
|
||||
"<legend>Sensors</legend>"
|
||||
#if defined CONFIG_ENABLE_BMP180 || defined CONFIG_ENABLE_BMP280
|
||||
"" + ((BMP180IsConnected() || BMP280IsConnected()) ? "<h6>BMP180/280</h6>Temperature " + String(temp, 2) + "C<br/> Pressure " + String(pressure, 2) + "hPa<br/>" : "BMP180/280 Disconnected" ) + ""
|
||||
#ifdef CONFIG_ENABLE_BMP180
|
||||
"Temperature " + String(temp, 2) + "C<br/>"
|
||||
"Pressure " + String(pressure, 2) + "mB<br/>"
|
||||
#endif
|
||||
#ifdef CONFIG_ENABLE_DHT
|
||||
"" + (DHTIsConnected() ? "<h6>DHT</h6>Temperature " + String(dhtTemp, 0) + "C<br/> Humidity " + String(dhtHumidity, 0) + "%<br/>" : "DHT Disconnected" ) + ""
|
||||
#endif
|
||||
#ifdef CONFIG_ENABLE_SCD4X
|
||||
"" + (SCD4XIsConnected() ? "<h6>SCD4X</h6>Temperature " + String(SCD4xT, 0) + "C<br/> Humidity " + String(SCD4xH, 0) + "%<br/> CO2 " + String(SCD4xCo2) + "ppm<br/>" : "SCD4X Disconnected" ) + ""
|
||||
#endif
|
||||
#ifdef CONFIG_ENABLE_BME680
|
||||
"" + (BME680IsConnected() ? "<h6>BME680</h6>Temperature " + String(bme680T, 2) + "C<br/> Pressure " + String(bme680P, 2) + "hPa<br/> Humidity " + String(bme680H, 2) + "%<br/> Gaz " + String(bme680G, 2) + "kOhm<br/>" : "BME680 Disconnected" ) + ""
|
||||
#endif
|
||||
#ifdef CONFIG_BME680_BSEC_ENABLE
|
||||
"" + (BME680BSECIsConnected() ? "<h6>BME680 BSEC</h6>Temperature " + String(bme680BSECT, 2) + "C<br/> Pressure " + String(bme680BSECP, 2) + "hPa<br/> Humidity " + String(bme680BSECH, 2) + "%<br/> Indoor Air Quality " + String(bme680BSECIaq, 2) + "/500<br/> IAQ Accuraccy" + String(bme680BSECIaqAcc) + "/3<br/>": "BME680 Disconnected" ) + ""
|
||||
"Temperature DHT " + String(dhtTemp, 0) + "C<br/>"
|
||||
"Humidity DHT " + String(dhtHumidity, 0) + "%<br/>"
|
||||
#endif
|
||||
#ifdef CONFIG_ENABLE_DRY_SENSOR
|
||||
"Dryness " + String((dryness * 100) / 1024) + "%<br/>"
|
||||
#endif
|
||||
#ifdef CONFIG_ENABLE_TELEINFO
|
||||
"<h6>Power Consumption</h6> Base " + String(teleBase, 2) +"Kwh<br/> AC Power " + telePapp +"VA<br/> Instant Current" + teleIinst +"A<br/>"
|
||||
"Dryness " + String((dryness*100)/1024) + "%<br/>"
|
||||
#endif
|
||||
"</fieldset>" + gpioControlHTML + gpioObserved + pwmControlHTML + "<fieldset>"
|
||||
"<legend>Settings</legend>"
|
||||
"<a href=\"/setup\">Enter Setup</a><br/>"
|
||||
"<a href=\"/upload\">Update firmware</a><br/>" + optimiseConfig +
|
||||
"<a href=\"/upload\">Update firmware</a><br/>"
|
||||
"MQTT Status: " + (MqttIsConnected() ? "Connected" : "Disconnected") + "<br/>"
|
||||
#ifdef CONFIG_ENABLE_BMP180
|
||||
"BMP 180 (Temp+Pression) Status: " + (BMP180IsConnected() ? "Connected" : "Disconnected") + "<br/>"
|
||||
#endif
|
||||
"Wifi Strength: " + WiFi.RSSI() + "dBm<br/>"
|
||||
"Free space: " + ESP.getFreeSketchSpace() + "<br/>"
|
||||
"Free heap: " + ESP.getFreeHeap() + "<br/>"
|
||||
@ -69,7 +58,7 @@ void WebSendError(const char *error) {
|
||||
server.send(500, "text/plain", error);
|
||||
}
|
||||
|
||||
void WebBuildSSIDList(String &datalist) {
|
||||
void WebBuildSSIDList(String &datalist){
|
||||
int n = WiFi.scanNetworks();
|
||||
datalist = "<datalist id=\"scan_ssid\">";
|
||||
// sort by RSSI
|
||||
@ -84,61 +73,41 @@ void WebBuildSSIDList(String &datalist) {
|
||||
}
|
||||
}
|
||||
}
|
||||
for (int i = 0; i < n; ++i) {
|
||||
datalist += "<option value=\"" + WiFi.SSID(indices[i]) + "\">";
|
||||
for (int i = 0; i < n; ++i){
|
||||
datalist += "<option value=\""+WiFi.SSID(indices[i])+"\">";
|
||||
}
|
||||
datalist += "</datalist>";
|
||||
}
|
||||
|
||||
void WebHandleSetupPreConfig() {
|
||||
conf.bssid = strdup( WiFi.BSSIDstr().c_str());
|
||||
conf.channel = WiFi.channel();
|
||||
conf.ip_mode = 1;
|
||||
conf.ip = WiFi.localIP();
|
||||
conf.mask = WiFi.subnetMask();
|
||||
conf.gw = WiFi.gatewayIP();
|
||||
conf.dns = WiFi.dnsIP();
|
||||
conf.dns2 = WiFi.dnsIP(1);
|
||||
WebHandleSetup();
|
||||
}
|
||||
|
||||
void WebHandleSetup() {
|
||||
String ssidlist;
|
||||
WebBuildSSIDList(ssidlist);
|
||||
String dhcpChecked = conf.ip_mode == 0 ? "checked" : "";
|
||||
String staticChecked = conf.ip_mode == 1 ? "checked" : "";
|
||||
|
||||
|
||||
server.send(200, "text/html", "<form action=\"/save\" method=\"get\">"
|
||||
"<fieldset>"
|
||||
"<legend>Wifi configuration:</legend>"
|
||||
"<div><label for=\"ssid\">Wifi SSID: </label> <br/><input list=\"scan_ssid\" type=\"text\" name=\"ssid\" value=\"" + String(conf.ssid) + "\" /></div>"
|
||||
"<div><label for=\"ssid\">Wifi SSID :</label> <br/><input list=\"scan_ssid\" type=\"text\" name=\"ssid\" value=\"" + String(conf.ssid) + "\" /></div>"
|
||||
"" + ssidlist + ""
|
||||
"<div><label for=\"password\">Wifi Password: </label><br/><input type=\"password\" name=\"password\" style=\"border-color:red\" value=\"" + String(conf.password) + "\"/> </div>"
|
||||
"<div><label for=\"host\">Hostname: </label><br/><input type=\"text\" name=\"host\" value=\"" + String(conf.host) + "\" /> </div>"
|
||||
"<div><label for=\"channel\">Channel (0 for auto): </label><br/><input type=\"text\" name=\"channel\" value=\"" + String(conf.channel) + "\" /> </div>"
|
||||
"<div><label for=\"bssid\">BSSID (Empty for auto): </label><br/><input type=\"text\" name=\"bssid\" value=\"" + String(conf.bssid) + "\" /> </div>"
|
||||
"<div><label for=\"password\">Wifi Password :</label><br/><input type=\"password\" name=\"password\" style=\"border-color:red\" /> </div>"
|
||||
"<div><label for=\"host\">Hostname :</label><br/><input type=\"text\" name=\"host\" value=\"" + String(conf.host) + "\" /> </div>"
|
||||
"</fieldset>"
|
||||
"<fieldset>"
|
||||
"<legend>IP Configuration</legend>"
|
||||
"<div><input type=\"radio\" name=\"ip_config\" value=\"0\" " + dhcpChecked + ">DHCP <input type=\"radio\" name=\"ip_config\" value=\"1\" " + staticChecked + ">Static</div>"
|
||||
"<div><label for=\"ip\">Ip :</label><br/><input type=\"text\" name=\"ip\" value=\"" + (conf.ip == 0 ? WiFi.localIP().toString() : IPAddress(conf.ip).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"gw\">Gateway :</label><br/><input type=\"text\" name=\"gw\" value=\"" + (conf.gw == 0 ? WiFi.gatewayIP().toString() : IPAddress(conf.gw).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"mask\">Netmask :</label><br/><input type=\"text\" name=\"mask\" value=\"" + (conf.mask == 0 ? WiFi.subnetMask().toString() : IPAddress(conf.mask).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"mask\">DNS :</label><br/><input type=\"text\" name=\"dns\" value=\"" + (conf.dns == 0 ? (WiFi.dnsIP().isSet() ? WiFi.dnsIP().toString():"") : IPAddress(conf.dns).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"mask\">DNS2 :</label><br/><input type=\"text\" name=\"dns2\" value=\"" + (conf.dns2 == 0 ? (WiFi.dnsIP(1).isSet() ? WiFi.dnsIP(1).toString():"") : IPAddress(conf.dns2).toString()) + "\" /> </div>"
|
||||
"<div><input type=\"radio\" name=\"ip_config\" value=\"0\" checked>DHCP <input type=\"radio\" name=\"ip_config\" value=\"1\">Static</div>"
|
||||
"<div><label for=\"ip\">Ip :</label><br/><input type=\"text\" name=\"ip\" value=\"" + (conf.ip == 0 ? "192.168.0.123": IPAddress(conf.ip).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"gw\">Gateway :</label><br/><input type=\"text\" name=\"gw\" value=\"" + (conf.gw == 0 ? "192.168.0.250": IPAddress(conf.gw).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"mask\">Netmask :</label><br/><input type=\"text\" name=\"mask\" value=\"" + (conf.mask == 0 ? "255.255.255.0": IPAddress(conf.mask).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"mask\">DNS :</label><br/><input type=\"text\" name=\"dns\" value=\"" + (conf.dns == 0 ? "192.168.0.250": IPAddress(conf.dns).toString()) + "\" /> </div>"
|
||||
"<div><label for=\"mask\">DNS2 :</label><br/><input type=\"text\" name=\"dns2\" value=\"" + (conf.dns2 == 0 ? "": IPAddress(conf.dns2).toString()) + "\" /> </div>"
|
||||
"</fieldset>"
|
||||
"<fieldset>"
|
||||
"<legend>MQTT:</legend>"
|
||||
"<div><label for=\"mqttServer\">Server :</label><br/><input type=\"text\" name=\"mqttServer\" value=\"" + String(conf.mqttServer) + "\" /> </div>"
|
||||
"<div><label for=\"mqttUser\">Username :</label><br/><input type=\"text\" name=\"mqttUser\" value=\"" + String(conf.mqttUser) + "\" /> </div>"
|
||||
"<div><label for=\"mqttPasswd\">Password :</label><br/><input type=\"password\" name=\"mqttPasswd\" style=\"border-color:red\" value=\"" + String(conf.mqttPasswd) + "\" /> </div>"
|
||||
"<div><label for=\"mqttPasswd\">Password :</label><br/><input type=\"password\" name=\"mqttPasswd\" style=\"border-color:red\" /> </div>"
|
||||
"<div><label for=\"mqttPort\">Port :</label><br/><input type=\"text\" name=\"mqttPort\" value=\"" + String(conf.mqttPort) + "\" /> (8883 for secure Mqtts) </div>"
|
||||
"</fieldset>"
|
||||
"<fieldset>"
|
||||
"<legend>Sensor:</legend>"
|
||||
"<div><label for=\"samplingPeriod\">Sampling Period (ms): </label><br/><input type=\"text\" name=\"samplingPeriod\" value=\"" + String(conf.samplingPeriod) + "\" /> </div>"
|
||||
"</fieldset>"
|
||||
"<div class=\"button\"> <button type=\"submit\">Save</button></div>"
|
||||
"</form>");
|
||||
}
|
||||
@ -182,7 +151,7 @@ void WebHandleSave() {
|
||||
|| !server.hasArg("mqttServer") || !server.hasArg("mqttUser") || !server.hasArg("mqttPasswd")
|
||||
|| !server.hasArg("mqttPort") || !server.hasArg("ip_config") || !server.hasArg("ip")
|
||||
|| !server.hasArg("gw") || !server.hasArg("mask") || !server.hasArg("dns")
|
||||
|| !server.hasArg("dns2") || !server.hasArg("channel") || !server.hasArg("bssid") || !server.hasArg("samplingPeriod")) {
|
||||
|| !server.hasArg("dns2")) {
|
||||
server.send(500, "text/plain", "Bad arguments\r\n");
|
||||
return;
|
||||
}
|
||||
@ -192,42 +161,28 @@ void WebHandleSave() {
|
||||
if (server.arg("ip_config").toInt() == 1) {
|
||||
if (!WebSetIp(ip, "ip", "Incorrect IP") || !WebSetIp(gw, "gw", "Incorrect Gateway") || !WebSetIp(mask, "mask", "Incorrect NetMask") ||
|
||||
!WebSetIp(dns, "dns", "Incorrect DNS") || !WebSetIp(dns2, "dns2", "Incorrect DNS2")) {
|
||||
server.send(500, "text/plain", "Bad arguments\r\n");
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
productConfig newConf = {BOOTMODE_NORMAL,
|
||||
strdup(server.arg("ssid").c_str()),
|
||||
strdup(server.arg("password").c_str()),
|
||||
strdup(server.arg("host").c_str()),
|
||||
strdup(server.arg("mqttServer").c_str()),
|
||||
strdup(server.arg("mqttUser").c_str()),
|
||||
strdup(server.arg("mqttPasswd").c_str()),
|
||||
server.arg("mqttPort").toInt(),
|
||||
server.arg("ip_config").toInt(),
|
||||
static_cast<uint32_t>(ip),
|
||||
static_cast<uint32_t>(gw),
|
||||
static_cast<uint32_t>(mask),
|
||||
static_cast<uint32_t>(dns),
|
||||
static_cast<uint32_t>(dns2),
|
||||
static_cast<uint8_t>(server.arg("channel").toInt()),
|
||||
strdup(server.arg("bssid").c_str()),
|
||||
static_cast<uint32_t>(server.arg("samplingPeriod").toInt())};
|
||||
productConfig newConf = {BOOTMODE_NORMAL, strdup(server.arg("ssid").c_str()), strdup(server.arg("password").c_str()),
|
||||
strdup(server.arg("host").c_str()), strdup(server.arg("mqttServer").c_str()), strdup(server.arg("mqttUser").c_str()),
|
||||
strdup(server.arg("mqttPasswd").c_str()), server.arg("mqttPort").toInt(),
|
||||
server.arg("ip_config").toInt(), static_cast<uint32_t>(ip), static_cast<uint32_t>(gw),
|
||||
static_cast<uint32_t>(mask), static_cast<uint32_t>(dns), static_cast<uint32_t>(dns2)};
|
||||
if (EepromSaveConfig(newConf) < 0) {
|
||||
WebSendError("Cannot Save configuration ( Credentials too long ?Contains \";\"?)\r\n");
|
||||
WebSendError("Cannot Save Credentials (Too long ?Contains \";\"?)\r\n");
|
||||
return;
|
||||
}
|
||||
samplingPeriod = newConf.samplingPeriod;
|
||||
if (WiFi.softAPIP() != IPAddress((uint32_t)0)) {
|
||||
if(WiFi.softAPIP() != IPAddress((uint32_t)0)){
|
||||
//In STA mode, we can test the AP connection
|
||||
WiFi.begin(server.arg("ssid").c_str(), server.arg("password").c_str());
|
||||
server.send(200, "text/html", "<h1>Configuration Saved</h1><br/>"
|
||||
"<a href=\"/wifiStatus\">Check Wifi Configuration</a><br/>"
|
||||
"<a href=\"/reboot\">Reboot</a><br/>");
|
||||
} else {
|
||||
"<a href=\"/wifiStatus\">Check Wifi Configuration</a><br/>"
|
||||
"<a href=\"/reboot\">Reboot</a><br/>");
|
||||
}else{
|
||||
server.send(200, "text/html", "<h1>Configuration Saved</h1><br/>"
|
||||
"<a href=\"/reboot\">Reboot</a><br/>");
|
||||
"<a href=\"/reboot\">Reboot</a><br/>");
|
||||
}
|
||||
}
|
||||
|
||||
@ -261,7 +216,7 @@ void WebHandleReboot() {
|
||||
}
|
||||
|
||||
String statusToString(wl_status_t status) {
|
||||
switch (status) {
|
||||
switch(status){
|
||||
case WL_IDLE_STATUS: return String("Idle");
|
||||
case WL_NO_SSID_AVAIL: return String("Wifi not found");
|
||||
case WL_CONNECTED: return String("Connected");
|
||||
@ -275,7 +230,7 @@ String statusToString(wl_status_t status) {
|
||||
void WebHandleWifiStatus() {
|
||||
|
||||
String message;
|
||||
if (WiFi.status() == WL_DISCONNECTED)
|
||||
if(WiFi.status() == WL_DISCONNECTED)
|
||||
message += "<head><meta http-equiv=\"refresh\" content=\"1\" ></head>";
|
||||
message += "<h1>Wifi Connection Status</h1><br/>";
|
||||
message += "Connection to ";
|
||||
@ -283,21 +238,21 @@ void WebHandleWifiStatus() {
|
||||
message += ":<br/>";
|
||||
message += statusToString(WiFi.status());
|
||||
message += "<br/>";
|
||||
if (mode == BOOTMODE_SETUP && WiFi.status() == WL_CONNECTED) {
|
||||
if(mode == BOOTMODE_SETUP && WiFi.status() == WL_CONNECTED){
|
||||
message += "Wifi correctly setup! You can reboot now<br/>";
|
||||
message += "<a href=\"/reboot\">Reboot</a><br/>";
|
||||
}
|
||||
if (WiFi.status() == WL_CONNECT_FAILED || WiFi.status() == WL_NO_SSID_AVAIL) {
|
||||
if(WiFi.status() == WL_CONNECT_FAILED || WiFi.status() == WL_NO_SSID_AVAIL){
|
||||
message += "Try to reconfigure you WiFi details<br/>";
|
||||
message += "<a href=\"/setup\">Enter Setup</a><br/>";
|
||||
}
|
||||
server.send(200, "text/html", message);
|
||||
}
|
||||
|
||||
void WebBuildGpioControl() {
|
||||
if (NB_ELEMENTS(gpioControlled) > 0) {
|
||||
void WebBuildGpioControl(){
|
||||
if (NB_ELEMENTS(gpioControlled) > 0){
|
||||
gpioControlHTML += "<fieldset>"
|
||||
"<legend>Relay</legend>";
|
||||
"<legend>Relay</legend>";
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(gpioControlled) ; i++) {
|
||||
gpioControlHTML += "Relay " + String(gpioControlled[i]) + " " + "<a href=\"/gpio?gpio=" + String(gpioControlled[i]) + "&value=1\">ON</a>/";
|
||||
gpioControlHTML += "<a href=\"/gpio?gpio=" + String(gpioControlled[i]) + "&value=0\">OFF</a><br/>";
|
||||
@ -306,10 +261,10 @@ void WebBuildGpioControl() {
|
||||
}
|
||||
}
|
||||
|
||||
void WebBuildPwmControl() {
|
||||
if (NB_ELEMENTS(pwmControlled) > 0) {
|
||||
void WebBuildPwmControl(){
|
||||
if (NB_ELEMENTS(pwmControlled) > 0){
|
||||
pwmControlHTML += "<fieldset>"
|
||||
"<legend>PWM</legend>";
|
||||
"<legend>PWM</legend>";
|
||||
for (uint i = 0 ; i < NB_ELEMENTS(pwmControlled) ; i++) {
|
||||
pwmControlHTML += "PWM " + String(pwmControlled[i]) + "<br/>";
|
||||
pwmControlHTML += "<input type=\"range\" min=\"0\" max=\"1023\""
|
||||
@ -331,7 +286,6 @@ void WebSetupServer(int ) {
|
||||
WebBuildPwmControl();
|
||||
|
||||
server.on("/", WebHandleRoot);
|
||||
server.on("/setupPreConfig", WebHandleSetupPreConfig);
|
||||
server.on("/setup", WebHandleSetup);
|
||||
server.on("/save", WebHandleSave);
|
||||
server.on("/gpio", WebHandleGpio);
|
||||
@ -347,12 +301,11 @@ void WebSetupServer(int ) {
|
||||
}
|
||||
#else
|
||||
|
||||
void WebHandleRoot() {}
|
||||
void WebHandleSetupPreConfig() {}
|
||||
void WebHandleSetup() {}
|
||||
void WebHandleGpio() {}
|
||||
void WebHandleSave() {}
|
||||
void WebHandleOTA() {}
|
||||
void WebHandleNotFound() {}
|
||||
void WebSetupServer(int bootmode) {}
|
||||
void WebHandleRoot(){}
|
||||
void WebHandleSetup(){}
|
||||
void WebHandleGpio(){}
|
||||
void WebHandleSave(){}
|
||||
void WebHandleOTA(){}
|
||||
void WebHandleNotFound(){}
|
||||
void WebSetupServer(int bootmode){}
|
||||
#endif
|
||||
|
||||
@ -28,7 +28,7 @@
|
||||
|
||||
|
||||
|
||||
#include <vector>
|
||||
|
||||
#include <ESP8266WiFi.h>
|
||||
#include <WiFiClient.h>
|
||||
#include <ESP8266WebServer.h>
|
||||
@ -43,17 +43,12 @@
|
||||
|
||||
#include "debug_sketch.h"
|
||||
#include "BMP180.h"
|
||||
#include "BMP280.h"
|
||||
#include "BME680.h"
|
||||
#include "BME680_BSEC.h"
|
||||
#include "sensor_DHT.h"
|
||||
#include "dry_sensor.h"
|
||||
#include "MQTT.h"
|
||||
#include "Adafruit_MQTT.h"
|
||||
#include "Adafruit_MQTT_Client.h"
|
||||
#include "EEPROM.h"
|
||||
#include "Teleinfo.h"
|
||||
#include "SCD4X.h"
|
||||
|
||||
extern "C" {
|
||||
#include <user_interface.h>
|
||||
@ -66,22 +61,15 @@ extern "C" {
|
||||
|
||||
double temp, pressure;
|
||||
float dhtTemp, dhtHumidity;
|
||||
float bme680T, bme680P, bme680H, bme680G, bme680A;
|
||||
float bme680BSECT, bme680BSECP, bme680BSECH, bme680BSECIaq, bme680BSECIaqAcc;
|
||||
float teleIinst, telePapp, teleBase;
|
||||
float SCD4xT, SCD4xH;
|
||||
uint16_t SCD4xCo2;
|
||||
int dryness;
|
||||
uint8_t mode;
|
||||
int reconfig = 0;
|
||||
productConfig conf = {BOOTMODE_SETUP, NULL, NULL, NULL, NULL, NULL, NULL, 1883, 0, 0, 0, 0, 0, 0, 0, NULL, CONFIG_SAMPLING_PERIOD_MS};
|
||||
productConfig conf = {BOOTMODE_SETUP, "", "", "", "", "", "", 1883, 0, 0, 0, 0, 0, 0};
|
||||
// Should have less that MAXSUBSCRIPTIONS elements
|
||||
// MAXSUBSCRIPTIONS is defined is Adafruit_mqtt.h
|
||||
const int gpioControlled[] = CONFIG_CONTROLLED_GPIO;
|
||||
const int gpioObserved[] = CONFIG_OBSERVED_GPIO;
|
||||
const int pwmControlled[] = CONFIG_CONTROLLED_PWM;
|
||||
uint samplingPeriod = CONFIG_SAMPLING_PERIOD_MS;
|
||||
uint nbCycle = UINT_MAX - 1;
|
||||
|
||||
/* Set these to your desired credentials. */
|
||||
const char *ssid = CONFIG_SSID_NAME;
|
||||
@ -99,8 +87,8 @@ void WebSetupServer(int bootmode);
|
||||
|
||||
|
||||
#ifdef CONFIG_SETUP_BUTTON
|
||||
void onLongButtonPressed(uint8_t pin) {
|
||||
if (pin == CONFIG_SETUP_BUTTON) {
|
||||
void onLongButtonPressed(uint8_t pin){
|
||||
if(pin == CONFIG_SETUP_BUTTON){
|
||||
reconfig = 1;
|
||||
SKETCH_DEBUG_PRINTLN("Putting device in setup mode");
|
||||
mode = BOOTMODE_SETUP;
|
||||
@ -112,7 +100,6 @@ void onLongButtonPressed(uint8_t pin) {
|
||||
|
||||
void WifiSetup(productConfig conf) {
|
||||
IPAddress myIP;
|
||||
int connectionTry = 0;
|
||||
if (mode == BOOTMODE_SETUP) {
|
||||
SKETCH_DEBUG_PRINTLN("Configuring access point: " CONFIG_SSID_NAME);
|
||||
/* You can set a password to the AP here */
|
||||
@ -122,38 +109,18 @@ void WifiSetup(productConfig conf) {
|
||||
//Disable previous AP mode
|
||||
WiFi.softAPdisconnect(true);
|
||||
SKETCH_DEBUG_PRINTLN("Connecting to Wifi...");
|
||||
if (conf.ip_mode == 1) {
|
||||
if(conf.ip_mode == 1){
|
||||
SKETCH_DEBUG_PRINTLN("Use static ip configuration");
|
||||
WiFi.config(IPAddress(conf.ip), IPAddress(conf.gw), IPAddress(conf.mask), IPAddress(conf.dns), IPAddress(conf.dns2));
|
||||
}
|
||||
uint8_t *bssidConf = NULL;
|
||||
uint8_t bssid[6];
|
||||
if (conf.bssid[0] != '\0') {
|
||||
String bssidStr = conf.bssid;
|
||||
bssid[0] = strtoul(bssidStr.substring(0, 2).c_str(), NULL, 16);
|
||||
bssid[1] = strtoul(bssidStr.substring(3, 5).c_str(), NULL, 16);
|
||||
bssid[2] = strtoul(bssidStr.substring(6, 8).c_str(), NULL, 16);
|
||||
bssid[3] = strtoul(bssidStr.substring(9, 11).c_str(), NULL, 16);
|
||||
bssid[4] = strtoul(bssidStr.substring(12, 14).c_str(), NULL, 16);
|
||||
bssid[5] = strtoul(bssidStr.substring(15, 17).c_str(), NULL, 16);
|
||||
SKETCH_DEBUG_PRINTF("Using BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n", bssid[5], bssid[4], bssid[3], bssid[2], bssid[1], bssid[0]);
|
||||
bssidConf = bssid;
|
||||
}
|
||||
|
||||
SKETCH_DEBUG_PRINTF("Using channel %u (0==auto)\n", conf.channel );
|
||||
WiFi.begin(conf.ssid, conf.password, conf.channel, bssidConf);
|
||||
WiFi.begin(conf.ssid, conf.password);
|
||||
while (WiFi.status() != WL_CONNECTED) {
|
||||
delay(50);
|
||||
delay(500);
|
||||
SKETCH_DEBUG_PRINT(".");
|
||||
if (reconfig == 1) {
|
||||
if (reconfig == 1){
|
||||
reconfig = 0;
|
||||
return;
|
||||
}
|
||||
if (connectionTry == 120) {
|
||||
SKETCH_DEBUG_PRINTLN("Cannot connect to wifi. Try without BSSID and channel");
|
||||
WiFi.begin(conf.ssid, conf.password);
|
||||
}
|
||||
connectionTry++;
|
||||
}
|
||||
SKETCH_DEBUG_PRINTF("\nWiFi connected\n");
|
||||
|
||||
@ -223,8 +190,7 @@ void OTASetup() {
|
||||
#endif
|
||||
}
|
||||
|
||||
void setup()
|
||||
{
|
||||
void setup() {
|
||||
#ifdef CONFIG_SETUP_BUTTON
|
||||
new HIB(CONFIG_SETUP_BUTTON, HIGH, NULL, NULL, onLongButtonPressed);
|
||||
#endif
|
||||
@ -235,15 +201,11 @@ void setup()
|
||||
SKETCH_DEBUG_PRINTLN();
|
||||
|
||||
// Get GPIO 3 Status
|
||||
#if CONFIG_SERIAL_SHOULD_SWAP
|
||||
SKETCH_DEBUG_PRINTLN("SWAP UART");
|
||||
Serial.swap(); // Switch Serial on GPIO 13 & 15
|
||||
#endif
|
||||
Serial.swap(); //Switch Serial on GPIO 13 & 15
|
||||
pinMode(CONFIG_SETUP_GPIO, INPUT_PULLUP);
|
||||
int txStatus = digitalRead(CONFIG_SETUP_GPIO);
|
||||
#if !defined(CONFIG_ENABLE_EXTRA_GPIO) && CONFIG_SERIAL_SHOULD_SWAP
|
||||
#ifndef CONFIG_ENABLE_EXTRA_GPIO
|
||||
Serial.swap(); // Switch back on GPIO 1 & 3
|
||||
SKETCH_DEBUG_PRINTLN("SWAP UART");
|
||||
#endif
|
||||
|
||||
EEPROM.begin(CONFIG_EEPROM_SIZE);
|
||||
@ -264,8 +226,8 @@ void setup()
|
||||
SKETCH_DEBUG_PRINTLN("No configuration saved");
|
||||
}
|
||||
|
||||
SKETCH_DEBUG_PRINTF("Force Setup Mode ? : %s\n", txStatus ? "No" : "Yes");
|
||||
if (txStatus == 0) {
|
||||
SKETCH_DEBUG_PRINTF("Force Setup Mode ? : %s\n",txStatus ? "No" : "Yes");
|
||||
if(txStatus == 0){
|
||||
mode = BOOTMODE_SETUP;
|
||||
}
|
||||
|
||||
@ -278,121 +240,59 @@ void setup()
|
||||
if (mode == BOOTMODE_OTA) {
|
||||
OTASetup();
|
||||
} else {
|
||||
if (!BMP180Setup(CONFIG_BMP180_SDA, CONFIG_BMP180_SCL)) {
|
||||
if (!BMP180Setup(CONFIG_BMP180_SDA, CONFIG_BMP180_SCL)){
|
||||
SKETCH_DEBUG_PRINTLN("BMP180 init success");
|
||||
}
|
||||
if (!BMP280Setup()) {
|
||||
SKETCH_DEBUG_PRINTLN("BMP280 init success");
|
||||
}
|
||||
if (!DHTSetup(CONFIG_DHT_PIN)) {
|
||||
if (!DHTSetup(CONFIG_DHT_PIN)){
|
||||
SKETCH_DEBUG_PRINTLN("DHT init success");
|
||||
}
|
||||
if (!DrySetup(CONFIG_DRY_POWER_PIN)) {
|
||||
if (!DrySetup(CONFIG_DRY_POWER_PIN)){
|
||||
SKETCH_DEBUG_PRINTLN("DRY init success");
|
||||
}
|
||||
if(!BME680Setup()){
|
||||
SKETCH_DEBUG_PRINTLN("BME680 init success");
|
||||
}
|
||||
if(!BME680BSECSetup()){
|
||||
SKETCH_DEBUG_PRINTLN("BME680 with BSEC init success");
|
||||
}
|
||||
if(!TeleinfoSetup()){
|
||||
SKETCH_DEBUG_PRINTLN("Teleinfo init success");
|
||||
}
|
||||
if(!SCD4XSetup()){
|
||||
SKETCH_DEBUG_PRINTLN("SCD4X init success");
|
||||
}
|
||||
WebSetupServer(mode);
|
||||
}
|
||||
samplingPeriod = conf.samplingPeriod;
|
||||
#ifdef CONFIG_ENABLE_POWER_SAVE
|
||||
wifi_set_sleep_type(LIGHT_SLEEP_T);
|
||||
#endif
|
||||
}
|
||||
|
||||
uint nbCycle = CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS;
|
||||
void loop() {
|
||||
if (mode == BOOTMODE_OTA) {
|
||||
ArduinoOTA.handle();
|
||||
} else {
|
||||
server.handleClient();
|
||||
if (mode == BOOTMODE_NORMAL) {
|
||||
if (mode == BOOTMODE_NORMAL){
|
||||
MqttCheckSubscription();
|
||||
MqttCheckIRQ();
|
||||
}
|
||||
delay(CONFIG_WEB_DELAY_MS);
|
||||
|
||||
TeleinfoRetrieve(teleIinst, telePapp, teleBase);
|
||||
nbCycle++;
|
||||
if (nbCycle > samplingPeriod / CONFIG_WEB_DELAY_MS) {
|
||||
std::vector<struct mqttInfo> batchInfo;
|
||||
if (nbCycle > CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS) {
|
||||
if (!BMP180GetTempAndPressure(temp, pressure)) {
|
||||
SKETCH_DEBUG_PRINTF("Current %f°C Pressure %fmB\n", temp, pressure);
|
||||
batchInfo.push_back({(float)temp, TEMPERATURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({(float)pressure, PRESSURE_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
if (!BMP280GetTempAndPressure(temp, pressure)) {
|
||||
SKETCH_DEBUG_PRINTF("Current %f°C Pressure %fmB\n", temp, pressure);
|
||||
batchInfo.push_back({(float)temp, TEMPERATURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({(float)pressure, PRESSURE_FEED_FORMAT, 0, 0});
|
||||
SKETCH_DEBUG_PRINT("Current T°C ");
|
||||
SKETCH_DEBUG_PRINT(temp);
|
||||
SKETCH_DEBUG_PRINT(" Pressure mB ");
|
||||
SKETCH_DEBUG_PRINTLN(pressure);
|
||||
if (mode == BOOTMODE_NORMAL)
|
||||
MqttPublishBMP180(temp, pressure);
|
||||
}
|
||||
if (!DHTGetTempAndHumidity(dhtTemp, dhtHumidity)) {
|
||||
SKETCH_DEBUG_PRINTF("Current %f°C %f%% Humidity\n", dhtTemp, dhtHumidity);
|
||||
batchInfo.push_back({dhtTemp, TEMPERATURE_DHT_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({dhtHumidity, HUMIDITY_DHT_FEED_FORMAT, 0, 0});
|
||||
SKETCH_DEBUG_PRINT("Current T°C ");
|
||||
SKETCH_DEBUG_PRINT(dhtTemp);
|
||||
SKETCH_DEBUG_PRINT(" Humidity ");
|
||||
SKETCH_DEBUG_PRINTLN(dhtHumidity);
|
||||
if (mode == BOOTMODE_NORMAL)
|
||||
MqttPublishDHT(dhtTemp, dhtHumidity);
|
||||
}
|
||||
if (!SCD4XGetMeasure(SCD4xT, SCD4xH, SCD4xCo2)) {
|
||||
SKETCH_DEBUG_PRINTF("Current %f°C %f Humidity, Current C02 %d\n", SCD4xT, SCD4xH, SCD4xCo2);
|
||||
batchInfo.push_back({SCD4xT, SCD4X_TEMPERATURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({SCD4xH, SCD4X_HUMIDITY_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({(float)SCD4xCo2, SCD4X_CO2_FEED_FORMAT, 0, 0});
|
||||
if (!DryGetMeasure(dryness)){
|
||||
SKETCH_DEBUG_PRINT("Current dryness ");
|
||||
SKETCH_DEBUG_PRINT((dryness*100)/1024);
|
||||
SKETCH_DEBUG_PRINTLN("%");
|
||||
if (mode == BOOTMODE_NORMAL)
|
||||
MqttPublishDry(dryness);
|
||||
}
|
||||
if (!DryGetMeasure(dryness)) {
|
||||
SKETCH_DEBUG_PRINTF("Current dryness %d %%\n", (dryness * 100) / 1024);
|
||||
batchInfo.push_back({(float)dryness, DRY_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
if (!BME680GetMeasure(bme680T, bme680P, bme680H, bme680G, bme680A)) {
|
||||
SKETCH_DEBUG_PRINT("Current T°C: ");
|
||||
SKETCH_DEBUG_PRINT(bme680T);
|
||||
SKETCH_DEBUG_PRINT(" Pressure hPa: ");
|
||||
SKETCH_DEBUG_PRINT(bme680P);
|
||||
SKETCH_DEBUG_PRINT(" Humidity %: ");
|
||||
SKETCH_DEBUG_PRINTLN(bme680H);
|
||||
SKETCH_DEBUG_PRINT(" Gaz kOhms: ");
|
||||
SKETCH_DEBUG_PRINTLN(bme680G);
|
||||
SKETCH_DEBUG_PRINT(" Altitude M: ");
|
||||
SKETCH_DEBUG_PRINTLN(bme680A);
|
||||
batchInfo.push_back({bme680T, BME680_TEMPERATURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680P, BME680_PRESSURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680H, BME680_HUMIDITY_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680G, BME680_GAZ_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680A, BME680_ALT_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
|
||||
if (!BME680BSECGetMeasure(bme680BSECT, bme680BSECP, bme680BSECH, bme680BSECIaq,
|
||||
bme680BSECIaqAcc)) {
|
||||
SKETCH_DEBUG_PRINT("Current T°C: ");
|
||||
SKETCH_DEBUG_PRINT(bme680BSECT);
|
||||
SKETCH_DEBUG_PRINT(" Pressure hPa: ");
|
||||
SKETCH_DEBUG_PRINT(bme680BSECP);
|
||||
SKETCH_DEBUG_PRINT(" Humidity %: ");
|
||||
SKETCH_DEBUG_PRINT(bme680BSECH);
|
||||
SKETCH_DEBUG_PRINT(" Indoor Air Quality: ");
|
||||
SKETCH_DEBUG_PRINT(bme680BSECIaq);
|
||||
SKETCH_DEBUG_PRINT(" IAQ Accuracy: ");
|
||||
SKETCH_DEBUG_PRINTLN(bme680BSECIaqAcc);
|
||||
batchInfo.push_back({bme680BSECT, BME680_TEMPERATURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680BSECP, BME680_PRESSURE_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680BSECH, BME680_HUMIDITY_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680BSECIaq, BME680_IAQ_FEED_FORMAT, 0, 0});
|
||||
batchInfo.push_back({bme680BSECIaqAcc, BME680_IAQ_ACC_FEED_FORMAT, 0, 0});
|
||||
}
|
||||
|
||||
TeleinfoRetrieve(teleIinst, telePapp, teleBase, batchInfo);
|
||||
|
||||
if (mode == BOOTMODE_NORMAL)
|
||||
if (MqttBatchPublish(batchInfo, conf.mqttUser, conf.host))
|
||||
WifiSetup(conf);
|
||||
|
||||
nbCycle = 0;
|
||||
}
|
||||
}
|
||||
|
||||
@ -9,16 +9,8 @@
|
||||
#define CONFIG_WEB_DELAY_MS 100
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SAMPLING_PERIOD_MS
|
||||
#define CONFIG_SAMPLING_PERIOD_MS 60000
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENABLE_BME680) && defined(CONFIG_BME680_BSEC_ENABLE)
|
||||
#error "BME680 and BME680 BSEC cannot be enabled together"
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_BME680_BSEC_I2C_ADDR
|
||||
#define CONFIG_BME680_BSEC_I2C_ADDR 0x76
|
||||
#ifndef CONFIG_SAMPLING_PERIODE_MS
|
||||
#define CONFIG_SAMPLING_PERIODE_MS 60000
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENABLE_BMP180) && !defined(CONFIG_BMP180_SDA)
|
||||
@ -35,7 +27,7 @@
|
||||
|
||||
#if defined(CONFIG_ENABLE_DHT) && !defined(CONFIG_DHT_PIN)
|
||||
#error "When enabling DHT, you should configure SDA pin"
|
||||
#elif !defined(CONFIG_ENABLE_DHT) && !defined(CONFIG_DHT_PIN)
|
||||
#elif !defined(CONFIG_ENABLE_DHT)
|
||||
#define CONFIG_DHT_PIN 0
|
||||
#endif
|
||||
|
||||
@ -64,24 +56,9 @@
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SETUP_GPIO
|
||||
#define CONFIG_SETUP_GPIO 14
|
||||
#define CONFIG_SETUP_GPIO 3
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_DHT_TYPE
|
||||
#define CONFIG_DHT_TYPE DHT11
|
||||
#endif
|
||||
|
||||
#if CONFIG_SETUP_GPIO == 3 || CONFIG_SETUP_GPIO == 1
|
||||
#define CONFIG_SERIAL_SHOULD_SWAP
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ENABLE_TELEINFO)
|
||||
#warning "TELEINFO is using SERIAL for communication. Debug will be on Serial1 (D4)"
|
||||
#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial1
|
||||
#if defined(CONFIG_SERIAL_SHOULD_SWAP)
|
||||
#error "When enabling TELEINFO, SERIAL_SHOULD_SWAP cannot be enabled (SETUP_GPIO == 1 or 3)"
|
||||
#endif
|
||||
#if defined(CONFIG_ENABLE_EXTRA_GPIO)
|
||||
#error "When enabling TELEINFO, ENABLE_EXTRA_CPIO cannot be enabled"
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#pragma once
|
||||
#include "pins_arduino.h"
|
||||
|
||||
// Enable Serial Console (Disable to save space and power)
|
||||
#define CONFIG_SKETCH_DEBUG
|
||||
|
||||
@ -12,32 +12,19 @@
|
||||
//#define CONFIF_DISABLE_OTA
|
||||
//#define CONFIG_DISABLE_MQTT
|
||||
|
||||
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
|
||||
// It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
|
||||
// Should be powered by 3.3v and sampled every 3sec or 300s (Or you should adapt bsec_config_iaq in BME680_BSEC.ino )
|
||||
//#define CONFIG_BME680_BSEC_ENABLE
|
||||
#define CONFIG_BME680_BSEC_I2C_ADDR 0x77
|
||||
|
||||
// Enable the temperature, pressure, humidity and gaz Sensor BME680 on standard i2c esp8266 pins
|
||||
// It use default i2c pin GPIO4(D2): SDA, GPIO5(D1):SCL
|
||||
//#define CONFIG_ENABLE_BME680
|
||||
// Enable the temperatue and pressure Sensor BMP180
|
||||
// (CONFIG_BMP180_SDA and CONFIG_BMP180_SDA should be defined as well)
|
||||
//#define CONFIG_ENABLE_BMP180
|
||||
//#define CONFIG_BMP180_SDA SDA //D2
|
||||
//#define CONFIG_BMP180_SCL SCL //D1
|
||||
//
|
||||
//#define CONFIG_ENABLE_DHT
|
||||
//#define CONFIG_DHT_PIN 2
|
||||
//#define CONFIG_DHT_TYPE DHT22
|
||||
//#define CONFIG_ENABLE_BMP280
|
||||
#define CONFIG_ENABLE_BMP180
|
||||
#define CONFIG_BMP180_SDA 12
|
||||
#define CONFIG_BMP180_SCL 14
|
||||
|
||||
//#define CONFIG_ENABLE_DRY_SENSOR
|
||||
#define CONFIG_ENABLE_DHT
|
||||
#define CONFIG_DHT_PIN 5
|
||||
#define CONFIG_DHT_TYPE DHT11
|
||||
|
||||
#define CONFIG_ENABLE_DRY_SENSOR
|
||||
//If the dry sensor is powered by a GPIO, this GPIO could be defined here
|
||||
//#define CONFIG_DRY_POWER_PIN 13
|
||||
|
||||
//Advised CONFIG_SAMPLING_PERIOD_MS is 5s for this sensor
|
||||
//#define CONFIG_ENABLE_SCD4X
|
||||
#define CONFIG_DRY_POWER_PIN 16
|
||||
|
||||
// Enable light sleep to save some power (http://bbs.espressif.com/viewtopic.php?f=6&t=133&p=485&hilit=sleep+modem#p485)
|
||||
#define CONFIG_ENABLE_POWER_SAVE
|
||||
@ -48,25 +35,23 @@
|
||||
// Long press on this button will put device in setup mode at runtime
|
||||
#define CONFIG_SETUP_BUTTON 0
|
||||
|
||||
// Teleinfo https://github.com/hallard/LibTeleinfo/
|
||||
#define CONFIG_ENABLE_TELEINFO
|
||||
|
||||
/* DEFAULT VALUE ALSO DEFINED IN CONFIG.H */
|
||||
//If this GPIO is LOW at boot, device will enter setup mode
|
||||
#define CONFIG_SETUP_GPIO 14 //D5
|
||||
#define CONFIG_SETUP_GPIO 5
|
||||
|
||||
// Time to sleep between 2 webserver request (increase it reduce battery usage but increase latency)
|
||||
#define CONFIG_WEB_DELAY_MS 800
|
||||
//#define CONFIG_WEB_DELAY_MS 100
|
||||
|
||||
// Get sensors value every X ms
|
||||
#define CONFIG_SAMPLING_PERIOD_MS 30000
|
||||
#define CONFIG_SAMPLING_PERIODE_MS 300000
|
||||
|
||||
// Name of the SSID when in AP mode for configuration
|
||||
#define CONFIG_SSID_NAME "ESPConfiguratorBureau"
|
||||
#define CONFIG_SSID_NAME "ESPConfigurator"
|
||||
|
||||
// GPIO that can be set or get by mqtt and set via http
|
||||
// Should have less value than MAXSUBSCRIPTIONS
|
||||
//#define CONFIG_CONTROLLED_GPIO {12,13}
|
||||
#define CONFIG_CONTROLLED_GPIO {13}
|
||||
|
||||
// GPIO that can be get by mqtt and http
|
||||
// Pin 6 to 11 and 16 can not be used for mqtt
|
||||
|
||||
@ -2,15 +2,13 @@
|
||||
//#define CONFIG_SKETCH_DEBUG
|
||||
|
||||
// Set where debug messages will be printed.
|
||||
#ifndef DEBUG_PRINTER_WIFICONTROLSENSOR
|
||||
#define DEBUG_PRINTER_WIFICONTROLSENSOR Serial
|
||||
#endif
|
||||
#define DEBUG_PRINTER Serial
|
||||
|
||||
#ifdef CONFIG_SKETCH_DEBUG
|
||||
#define SKETCH_DEBUG_INIT(speed){ DEBUG_PRINTER_WIFICONTROLSENSOR.begin(speed); }
|
||||
#define SKETCH_DEBUG_PRINT(...) { DEBUG_PRINTER_WIFICONTROLSENSOR.print(__VA_ARGS__); }
|
||||
#define SKETCH_DEBUG_PRINTF(...) { DEBUG_PRINTER_WIFICONTROLSENSOR.printf(__VA_ARGS__); }
|
||||
#define SKETCH_DEBUG_PRINTLN(...) { DEBUG_PRINTER_WIFICONTROLSENSOR.println(__VA_ARGS__); }
|
||||
#define SKETCH_DEBUG_INIT(speed){ DEBUG_PRINTER.begin(speed); }
|
||||
#define SKETCH_DEBUG_PRINT(...) { DEBUG_PRINTER.print(__VA_ARGS__); }
|
||||
#define SKETCH_DEBUG_PRINTF(...) { DEBUG_PRINTER.printf(__VA_ARGS__); }
|
||||
#define SKETCH_DEBUG_PRINTLN(...) { DEBUG_PRINTER.println(__VA_ARGS__); }
|
||||
#else
|
||||
#define SKETCH_DEBUG_INIT(speed)
|
||||
#define SKETCH_DEBUG_PRINT(...) {}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user