From 5777094a2884ad3235007edd6a773e51ec9b261d Mon Sep 17 00:00:00 2001 From: Mathieu Maret Date: Sun, 15 Jan 2017 15:13:16 +0100 Subject: [PATCH] Add config for the 1st module --- WifiControlSensor/config_device.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/WifiControlSensor/config_device.h b/WifiControlSensor/config_device.h index c727a56..b13d847 100644 --- a/WifiControlSensor/config_device.h +++ b/WifiControlSensor/config_device.h @@ -14,17 +14,17 @@ // Enable the temperatue and pressure Sensor BMP180 // (CONFIG_BMP180_SDA and CONFIG_BMP180_SDA should be defined as well) -#define CONFIG_ENABLE_BMP180 -#define CONFIG_BMP180_SDA 12 -#define CONFIG_BMP180_SCL 14 +//#define CONFIG_ENABLE_BMP180 +//#define CONFIG_BMP180_SDA 12 +//#define CONFIG_BMP180_SCL 14 #define CONFIG_ENABLE_DHT -#define CONFIG_DHT_PIN 2 -#define CONFIG_DHT_TYPE DHT22 +#define CONFIG_DHT_PIN 14 +#define CONFIG_DHT_TYPE DHT11 -//#define CONFIG_ENABLE_DRY_SENSOR +#define CONFIG_ENABLE_DRY_SENSOR //If the dry sensor is powered by a GPIO, this GPIO could be defined here -//#define CONFIG_DRY_POWER_PIN 13 +#define CONFIG_DRY_POWER_PIN 12 // Enable light sleep to save some power (http://bbs.espressif.com/viewtopic.php?f=6&t=133&p=485&hilit=sleep+modem#p485) #define CONFIG_ENABLE_POWER_SAVE @@ -38,7 +38,7 @@ /* DEFAULT VALUE ALSO DEFINED IN CONFIG.H */ //If this GPIO is LOW at boot, device will enter setup mode -#define CONFIG_SETUP_GPIO 5 +#define CONFIG_SETUP_GPIO 4 // Time to sleep between 2 webserver request (increase it reduce battery usage but increase latency) //#define CONFIG_WEB_DELAY_MS 100 @@ -47,11 +47,11 @@ #define CONFIG_SAMPLING_PERIODE_MS 300000 // Name of the SSID when in AP mode for configuration -#define CONFIG_SSID_NAME "ESPConfiguratorBureau" +#define CONFIG_SSID_NAME "ESPConfigurator" // GPIO that can be set or get by mqtt and set via http // Should have less value than MAXSUBSCRIPTIONS -//#define CONFIG_CONTROLLED_GPIO {12,13} +#define CONFIG_CONTROLLED_GPIO {13} // GPIO that can be get by mqtt and http // Pin 6 to 11 and 16 can not be used for mqtt