Code simplification

WifiControlSensor/BMP180.h

@@ -14,8 +14,8 @@ int BMP180Setup(int sda, int scl);
 bool BMP180IsConnected();
 
 #else //CONFIG_ENABLE_BMP80
-int BMP180GetTemperature(double &t){return 0;};
+int BMP180GetTemperature(double &t){return -1;};
-int BMP180GetTempAndPressure(double &t, double &p){return 0;};
+int BMP180GetTempAndPressure(double &t, double &p){return -1;};
 int BMP180Setup(int , int ){SKETCH_DEBUG_PRINTLN("BMP180 is disabled at build time"); return 0;};
 bool BMP180IsConnected(){return false;};
 #endif

WifiControlSensor/BMP180.ino

@@ -3,6 +3,9 @@
 int BMP180Setup(int sda, int scl) {
   //Use BMP fork at https://github.com/mmaret/BMP180_Breakout_Arduino_Library/archive/master.zip
   bmp180Connected = bmp180.begin(sda, scl);
+	if (!bmp180Connected){
+		SKETCH_DEBUG_PRINTLN("Cannot connect to BMP180");
+	}
   return bmp180Connected;
 }
 
@@ -12,6 +15,8 @@ bool BMP180IsConnected() {
 
 int BMP180GetTemperature(double &t) {
   char status;
+	if(!BMP180IsConnected())
+		return -1;
   status = bmp180.startTemperature();
   if (status != 0)
   {

WifiControlSensor/WifiControlSensor.ino

@@ -259,34 +259,25 @@ void loop() {
     ArduinoOTA.handle();
   } else {
     server.handleClient();
-    if (MqttIsConfigured())
     MqttCheckSubscription();
     delay(CONFIG_WEB_DELAY_MS);
 
     nbCycle++;
     if (nbCycle > CONFIG_SAMPLING_PERIODE_MS / CONFIG_WEB_DELAY_MS) {
-#ifdef CONFIG_ENABLE_BMP180
+      if (BMP180GetTempAndPressure(temp, pressure) == 0) {
-      if (BMP180IsConnected() && BMP180GetTempAndPressure(temp, pressure) == 0) {
         SKETCH_DEBUG_PRINT("Current T°C ");
         SKETCH_DEBUG_PRINT(temp);
         SKETCH_DEBUG_PRINT(" Pressure mB ");
         SKETCH_DEBUG_PRINTLN(pressure);
-        if (MqttIsConfigured())
         MqttPublish(temp, pressure);
-      } else {
-        SKETCH_DEBUG_PRINTLN("Cannot get T°C");
       }
-#endif
+      if (DHTGetTempAndHumidity(dhtTemp, dhtHumidity) == 0) {
-#ifdef CONFIG_ENABLE_DHT
-      if (DHTIsConnected() && DHTGetTempAndHumidity(dhtTemp, dhtHumidity) == 0) {
         SKETCH_DEBUG_PRINT("Current T°C ");
         SKETCH_DEBUG_PRINT(dhtTemp);
         SKETCH_DEBUG_PRINT(" Humidity ");
         SKETCH_DEBUG_PRINTLN(dhtHumidity);
-        if (MqttIsConfigured())
         MqttDhtPublish(dhtTemp, dhtHumidity);
       }
-#endif
       nbCycle = 0;
     }
   }

WifiControlSensor/sensor_DHT.h

@@ -9,6 +9,6 @@ bool DHTIsConnected();
 
 #else //CONFIG_ENABLE_DHT
 int DHTSetup(int pin){SKETCH_DEBUG_PRINTLN("DHT is disabled at build time"); return 0};
-int DHTGetTempAndHumidity(float &t, float &h){return 0;};
+int DHTGetTempAndHumidity(float &t, float &h){return -1;};
 bool DHTIsConnected(){return false;};
 #endif

WifiControlSensor/sensor_DHT.ino

@@ -7,18 +7,17 @@ int DHTSetup(int pin){
 }
 
 int DHTGetTempAndHumidity(float &t, float &h){
-    int ret = 0;
+	if(!DHTIsConnected())
+		goto err;
     t = dht->readTemperature();
     h = dht->readHumidity();
-    if(isnan(t)){
+    if(isnan(t) || isnan(h))
-        t = 0;
+		goto err;
-        ret = -1;
+	return 0;
-    }
+err:
-    if(isnan(h)){
+	t=0;
-        h = 0;
+	h=0;
-        ret = -1;
+    return -1;
-    }
-    return ret;
 }
 
 bool DHTIsConnected(){