Adafruit_MQTT_Library/examples/adafruitio_secure_esp8266/adafruitio_secure_esp8266.ino

141 lines
4.4 KiB
Arduino
Raw Normal View History

/***************************************************
Adafruit MQTT Library ESP8266 Adafruit IO SSL/TLS example
Must use the latest version of ESP8266 Arduino from:
https://github.com/esp8266/Arduino
Works great with Adafruit's Huzzah ESP board & Feather
----> https://www.adafruit.com/product/2471
----> https://www.adafruit.com/products/2821
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
Written by Tony DiCola for Adafruit Industries.
SSL/TLS additions by Todd Treece for Adafruit Industries.
MIT license, all text above must be included in any redistribution
****************************************************/
#include <ESP8266WiFi.h>
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"
/************************* WiFi Access Point *********************************/
#define WLAN_SSID "WLAN_SSID"
#define WLAN_PASS "WIFI_PASSWORD"
/************************* Adafruit.io Setup *********************************/
#define AIO_SERVER "io.adafruit.com"
// Using port 8883 for MQTTS
#define AIO_SERVERPORT 8883
// Adafruit IO Account Configuration
// (to obtain these values, visit https://io.adafruit.com and click on Active Key)
#define AIO_USERNAME "YOUR_ADAFRUIT_IO_USERNAME"
#define AIO_KEY "YOUR_ADAFRUIT_IO_KEY"
/************ Global State (you don't need to change this!) ******************/
// WiFiFlientSecure for SSL/TLS support
WiFiClientSecure client;
// Setup the MQTT client class by passing in the WiFi client and MQTT server and login details.
2016-08-15 19:06:17 +02:00
Adafruit_MQTT_Client mqtt(&client, AIO_SERVER, AIO_SERVERPORT, AIO_USERNAME, AIO_KEY);
// io.adafruit.com SHA1 fingerprint
2022-08-15 19:18:56 +02:00
/* WARNING - This value was last updated on 08/15/22 and may not be up-to-date!
* If security is a concern for your project, we strongly recommend users impacted by this moving
* to ESP32 which has certificate verification by storing root certs and having a
* chain-of-trust rather than doing individual certificate fingerprints.
*/
static const char *fingerprint PROGMEM = "18 C0 C2 3D BE DD 81 37 73 40 E7 E4 36 61 CB 0A DF 96 AD 25";
/****************************** Feeds ***************************************/
2016-08-15 21:24:21 +02:00
// Setup a feed called 'test' for publishing.
// Notice MQTT paths for AIO follow the form: <username>/feeds/<feedname>
2016-08-15 21:24:21 +02:00
Adafruit_MQTT_Publish test = Adafruit_MQTT_Publish(&mqtt, AIO_USERNAME "/feeds/test");
/*************************** Sketch Code ************************************/
void setup() {
Serial.begin(115200);
delay(10);
Serial.println(F("Adafruit IO MQTTS (SSL/TLS) Example"));
// Connect to WiFi access point.
Serial.println(); Serial.println();
Serial.print("Connecting to ");
Serial.println(WLAN_SSID);
delay(1000);
WiFi.begin(WLAN_SSID, WLAN_PASS);
delay(2000);
while (WiFi.status() != WL_CONNECTED) {
delay(500);
Serial.print(".");
}
Serial.println();
Serial.println("WiFi connected");
Serial.println("IP address: "); Serial.println(WiFi.localIP());
// check the fingerprint of io.adafruit.com's SSL cert
client.setFingerprint(fingerprint);
}
uint32_t x=0;
void loop() {
// Ensure the connection to the MQTT server is alive (this will make the first
// connection and automatically reconnect when disconnected). See the MQTT_connect
// function definition further below.
MQTT_connect();
// Now we can publish stuff!
Serial.print(F("\nSending val "));
Serial.print(x);
Serial.print(F(" to test feed..."));
if (! test.publish(x++)) {
Serial.println(F("Failed"));
} else {
Serial.println(F("OK!"));
}
// wait a couple seconds to avoid rate limit
delay(2000);
}
// Function to connect and reconnect as necessary to the MQTT server.
// Should be called in the loop function and it will take care if connecting.
void MQTT_connect() {
int8_t ret;
// Stop if already connected.
if (mqtt.connected()) {
return;
}
Serial.print("Connecting to MQTT... ");
uint8_t retries = 3;
while ((ret = mqtt.connect()) != 0) { // connect will return 0 for connected
Serial.println(mqtt.connectErrorString(ret));
Serial.println("Retrying MQTT connection in 5 seconds...");
mqtt.disconnect();
delay(5000); // wait 5 seconds
retries--;
if (retries == 0) {
// basically die and wait for WDT to reset me
while (1);
}
}
Serial.println("MQTT Connected!");
}